With this two videos about Metabo and Hikoki you preety much covered everything good job! 👍 When you're reviewing plunge saws one important thing is missing in my opinion. When you clamp the track, make a cut at 90° all the way, and then without moving the track, cut again but with 45° and only half way. If two cut lines meet we're home, if not it's going to couse problems.

Thanks for this! 👊

@ToolsAndStuffOFFICIAL

Жыл бұрын

No probs

AH! Waiting for that Hikoi in the states as MetaboHPT is KILLING ME!😅

@MultiMeschi

Жыл бұрын

They're not available in Europe, yet as well.

Ten adapter AC ma soft start żeby nie wybijać bezpieczników i na start daje mały prąd dlatego elektronika w Pile ma za mało prądu w kondensatorach elektroniki falownika aby móc wyzwolić hamulec!

The issue with the AC adapter is probably to do with something like using the motor as a generator to brake. This works with a battery because the battery can absorb the power, but you can't shove the pixies back in the wall. Just my guess.

@kizzjd9578

Жыл бұрын

The adapter also has less power than a battery.

@whirled_peas

Жыл бұрын

You can shove the pixies back in the wall. Devices often dump load back into the mains

@riba2233

Жыл бұрын

@@kizzjd9578 it is rated at 2kw, higher than any of their batteries.

@baseballdude8491

Жыл бұрын

​@@kizzjd9578 not in all applications

@aessu

Жыл бұрын

The same thing also happens with the 230mm (9") angle grinder.

Cannot find this HPT track saw anywhere in Canada. Sad. The review is great! I would say the best in all the track saw review I have went through!

awesome, another track saw review, love them! And of course can't wait for the big showdown between all of them :) that metabo 5.5ah pack uses 3ah cells so it is basically a 6ah pack, they just limit it to 5.5ah so it doesn't exceed 99Wh for air shipping. And since it uses 3Ah cells it is indeed more powerful then other ones :)

@ron1martens

Жыл бұрын

@riba2233 So the 5.5 an use 3ah cells. What does the 8 ah and 10 ah use? I read someone stated the 10ah runs at 10 whilst the 8 runs at 30 and the 5.5 runs at 35 whether that is watt hour I'm not sure. I cannot remember the exact wording. I understand its how the battery communicates with the machine which determines the output of power running on the machine. Drawing more current.

@riba2233

Жыл бұрын

@@ron1martens 8ah uses samsung 40t 4ah cells, and 10ah uses 5ah Samsung 50s cells. 3ah cells are very powerful, around 40-50amps, 4ah have decent power, 30-35amps, and 5ah ones are relatively weak at 20-25 amps.

Nicely done to show Metabo comparison with Milwaukee earlier, and now say Hikoki is the same as Metabo, only has more power! This way you said what you thought earlier about Hikoki and they can shove their criticism policies up their a.. :)

I'm heavily invested in both platforms cause at the time the Hikoki wasn't available so I went for the Metabo and got loads of 5.5ah batteries second hand. I find that the multivolts batteries 2.5ah are shit.. at least 10+ have been returned because of faulty BMS boards on them,I had not yet had one CAS gone wrong. Also my Hikoki 36v mitre saw is way too heavy to be loading in/out the van on a daily basis so now I'd sell it and go for the new brushless 216 Metabo almost half the weight. Great informative video subscribed.

Nice one! Thanks for showing these. I may have missed it, but do they have the 1mm score cut switch like the Makita and Mafell?

@ToolsAndStuffOFFICIAL

Жыл бұрын

No they don't unfortunately.

Looking forward to see this as the metabo hpt track saw in the United states.

Does it have the anti tilt device for 45°?

is there a hikoki vs the milwaukee vs power?

all cordless tool must have same battery. need laws force them into new battery for every single tool create from now on.

Hey tools, what’s your thoughts Hikoki vs festool?

Im curious if that top connector would work with Makita, festool, mikwaikee, etc tracks. It seems like a much better design

@Doyle047

Жыл бұрын

It won’t, only works on Metabo/ Hikoki, Bosch and Mafell tracks

I checked my Table saw, 7.25 inch circular and miter saw. All 36v tools and all have a brake. The brake works with both the battery and the AC converter. Wonder why this saw isn't braking with the AC converter. I'm in the NA market, so Metabo HPT for me.

@onikwa

7 ай бұрын

Probably because it's a German metabo saw that was never initially designed to brake using the AC adapter. And for the record, the 36v angle grinders also don't brake using the adapter. There's even a warning about it in the manual.

@ToolsAndStuffOFFICIAL

7 ай бұрын

You think this saw is German?

Invaluable information dude. I am tossing up between one of these or Milwaukee. There are big deals on these in shops atm.

@ToolsAndStuffOFFICIAL

3 ай бұрын

I think the Milwaukee is a better unit. kzread.info/dash/bejne/gWqMsMaToZWZmLQ.html

@titansteelful

Ай бұрын

@@ToolsAndStuffOFFICIAL Iv been using it for a month now, Iv nothing to compare it to, however it's a beast 👍

Tools , do you know if Metabo HPT is releasing this track saw. I’ve looked online to no avails. Any info would be appreciated !

@ToolsAndStuffOFFICIAL

Жыл бұрын

I can't tell you 100%, but I think they will be.

@user-ii8dz4vu7n

Жыл бұрын

Right now it's only available in NZ. No idea when it's going to be released elsewhere

@pete_lind

Жыл бұрын

@@user-ii8dz4vu7n Cargo ships take 3 months to sail from Asia to Europe , they also need to distribute those tools to every shop , before starting to promote it . Makita put officially out 18v DAS blower this month , here in Finland , seem to be very popular , ordered one comes next month , it run out of stock , between me looking that they have 3 left to me finishing the order .

The brake function, which provides a quick reverse current, seems to be easily achievable for DC-powered tools. However, it might be too complex and costly to make it in an AC-DC converter, just my guess. Interestingly, some Festool 220V tools have the brake function, while their 110V versions do not. During a Festool USA live, it was mentioned that the development of the brake function faced difficulties and was challenging to resolve without changing the tool's profile.

@ToolsAndStuffOFFICIAL

Жыл бұрын

Corded Makita mitre saws have had brakes for at least 10 years so it can't be too hard. Thanks for commenting, haven't seen you in a while. Have you seen the new Mafell router?

@robertzhao852

Жыл бұрын

​@@ToolsAndStuffOFFICIAL Yes, it's amazing, definitely will buy it, but can't find the price yet, hope not too exorbitant

@ToolsAndStuffOFFICIAL

Жыл бұрын

I know piranha tools have ordered them but Gaston still doesn't know the price.

@Rompestromper

Жыл бұрын

They expect in September to run out the factories and the price in the netherlands is set 785 euros, just fyi.

@ToolsAndStuffOFFICIAL

Жыл бұрын

Ouch!

Best Festool👍👍👍

I cant wait to swap my makita x2 plunge saw for that Hikoki.

@user-fx7ic1tw6d

Жыл бұрын

Makita XGT💪

@igorkuzmanovski5552

Жыл бұрын

The xgt makita is so much better then 18x2 it cuts so much quicker and has less blade deflection

@riba2233

Жыл бұрын

don't, get the XGT makita version.

@contax50mm

Жыл бұрын

I sold all my lxt, all i have is metabo hpt and m12 now, no point in having one Makita tool anymore

@riba2233

Жыл бұрын

@@contax50mm why lol, what was wrong with lxt and why did you choose hpt over xgt?

No riving knife?

@ToolsAndStuffOFFICIAL

Жыл бұрын

Nah

Been eyeing the hikoki as all the rest of my kit is hikoki. The only missing piece has been a track saw, currently have a Makita (which is a good saw) Just a pitty we can,t get our hands on it yet.

You can’t get hikoki in inches right?

@ToolsAndStuffOFFICIAL

Жыл бұрын

If they release it as Metabo HPT then it will be in inches.

@Dtonk4609

Жыл бұрын

@@ToolsAndStuffOFFICIAL seems like they are behind or not focused at all in metabo hpt releases

Got it. If I have to choose from these two, I'll pick Festool. Or, I could simply use the one I already have and rarely have used for almost 20 years...

2.5m is not an odd size. It's the standard hight of every room in Europe.

Google off course had it wrong. It is called "FÜHRUNGSSCHIENE" not "Führungssystem" ! A " Führungssystem" in German would be considered more of a mechanism that works, at least partly, on itself or a whole system of several guide rails, attachments, aso... In short, saw plus guide rail = a cutting system, guide rail = just a guide rail. I would opt for the Hikoi. One more thing, to annoy the c... out of you 😂, you slide your hand down on the handle of a Metabo drill, than you push with the downwards pointing palm of your hand the red button on the back of the tool and pull, with the other hand the battery off!

@pete_lind

Жыл бұрын

Festool has FS so they copied that , but Metabo use Mafell tracks . Bosch has different , on track/off track indicator , copied blade change system from Festool , but uses Mafell tracks . Mafell has best blade change system , blade cover tilts down , i dont think anyone else has that , no need of a silly hole on side , from where half of saw dust escapes .

а разве не верна формула: HIKOKI = METABO⁉️

@ToolsAndStuffOFFICIAL

Жыл бұрын

Hikoki = Metabo HPT. Metabo does not = Metabo HPT

@user-fx7ic1tw6d

Жыл бұрын

@@ToolsAndStuffOFFICIAL Thanks ✊

FS would be Führungschiene not Führungssystem

please stop pronouncing Hitachi like it has a second t🤪

@ToolsAndStuffOFFICIAL

Жыл бұрын

Please get your ears checked.

@toti-pals

Жыл бұрын

@@ToolsAndStuffOFFICIAL ok I will or get better speakers but thanks for the vids your doing good stuff😄

@baseballdude8491

Жыл бұрын

Huh Yeah u need a doc to check u out-yout hearing things

@toti-pals

Жыл бұрын

@@baseballdude8491 the doc put a light in my ear I saw it on the wall on the other side

@baseballdude8491

Жыл бұрын

@@toti-pals I had the same experience Maybe you could borrow your wife Hitachi personal "messager" as it helped my wife hear better😂