Unboxing of the Hikoki (Hitachi) Table Saw C10 RJ (X) 254mm ("10) Music: www.bensound.com
Жүктеу.....
Пікірлер: 41
@jonathanbrown2190 Жыл бұрын
This video was incredibly helpful, thank you for making it.
@mahmood40363 жыл бұрын
Good job, just bought one and u saved me a lot of time.
@GS-jp1gu2 жыл бұрын
Thanks for putting that up. It made unboxing and setup of my Hikoki same table saw a breeze.
@nemobiznesmaker8343 жыл бұрын
Dziekuje za film 🍻🍻🍻🍻
@Dazzafourfifty3 жыл бұрын
Just purchased the 36v version including stand and AC battery adaptor, dam nice bit of kit !! and have the best of both worlds plug in power or battery
Жыл бұрын
I just assembled the saw not following instruction to turn it over. 1st assebled legs, wheelsa and stops at the end. 2nd put saw on the stand and put in four screws. It seemed much easier and I did not have to worry about damaging the table surface.
@Danko883 жыл бұрын
Just got his saw 11/8 for 329 at lowes , noticed yours has a completely different fence system. So far loving it, straight out of box and fence spot on.
@newbieshoplawn5836
3 жыл бұрын
This one is the Australian version. Been using it for a month and love it too. The price here is $900 :(
@LemonySnicket-EUC
3 жыл бұрын
It is 299.00 now.
@histguy101
2 жыл бұрын
@@newbieshoplawn5836 Well, that's about $600 USD. I think the normal price on this saw is $529 here with stand, and $599 for the cordless version with no stand.
@Xboxers2 жыл бұрын
Just got it for my birthday. Haven´t used it yet, hope it's going to be better then my first experience. The slider of the fence had a broken part in the aluminum which is why I couldn't move it past 20 cm's. Very annoying but I have fixed it. Set-up with your video was quite easy however :)
@igomez2610 ай бұрын
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice kzread.infoUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
@davehamel92982 жыл бұрын
Good general setup video and is a keeper. Thankfully, the music is low key and not distracting.
@weimaraner23 жыл бұрын
Just bought this today in Melbourne Aus. $1199 inc the stand. Lets see how it goes.
@hamubice1551
2 жыл бұрын
Now that you've had it a year, are you happy with it?
@cosmosdaze2 жыл бұрын
Appreciate the video mate. Common problem amongst reviewers is the soft start failure. Any problems? Howzit running in general 1 year on?
@d.k.1394 Жыл бұрын
Lovely
@Xboxers2 жыл бұрын
What is the difference btw between C10RJ and C10RJWAZ? My girlfriend order the latter but received the first.
@williammuenster73864 ай бұрын
Hmmmmm Looks like Hitachi/Metabo
@XBuilt43143 жыл бұрын
How much does the saw weight on it's own without the stand?
@d.k.1394
Жыл бұрын
Heavy
@mahmood40363 жыл бұрын
Collin I just paid 999 with stand from Sydney tools Melbourne
@WrenHillFarm3 жыл бұрын
Do you know what the measurement of the saw is when the legs are folded up?
@Notion8
3 жыл бұрын
50 cm max in depth
@d.k.1394
Жыл бұрын
Pretty big
@gazmurrell2 жыл бұрын
Nicely done. I'm thinking of getting one and I found your vid to be very informative. How long did the blade last? Socks and thongs, how Aussie!
@d.k.1394
Жыл бұрын
Lol
@1FishinAddict3 жыл бұрын
Metabo in the US
@newbieshoplawn5836
3 жыл бұрын
Double check that it is the same. In Australia we also have the Metabo line of table saws and it is very different. For example it basically caters for a left hander based on the where the handles and switches are setup.
@marekmaszynista2 жыл бұрын
does this saw have a soft start?
@histguy101
2 жыл бұрын
yes, and brake
@d.k.1394
Жыл бұрын
Yess
@55realitycheck10 ай бұрын
not a good idea to use the mitre guage with the fence...not safe
@bencematyasmarton5592 жыл бұрын
Can anybody tell me what is the insert plate made of? Is it strong enough or shitty plastic like in Makita mlt100?
@Xboxers
2 жыл бұрын
It seems to be aluminum alloy or something like that. Atleast not plastic.
Пікірлер: 41
This video was incredibly helpful, thank you for making it.
Good job, just bought one and u saved me a lot of time.
Thanks for putting that up. It made unboxing and setup of my Hikoki same table saw a breeze.
Dziekuje za film 🍻🍻🍻🍻
Just purchased the 36v version including stand and AC battery adaptor, dam nice bit of kit !! and have the best of both worlds plug in power or battery
I just assembled the saw not following instruction to turn it over. 1st assebled legs, wheelsa and stops at the end. 2nd put saw on the stand and put in four screws. It seemed much easier and I did not have to worry about damaging the table surface.
Just got his saw 11/8 for 329 at lowes , noticed yours has a completely different fence system. So far loving it, straight out of box and fence spot on.
@newbieshoplawn5836
3 жыл бұрын
This one is the Australian version. Been using it for a month and love it too. The price here is $900 :(
@LemonySnicket-EUC
3 жыл бұрын
It is 299.00 now.
@histguy101
2 жыл бұрын
@@newbieshoplawn5836 Well, that's about $600 USD. I think the normal price on this saw is $529 here with stand, and $599 for the cordless version with no stand.
Just got it for my birthday. Haven´t used it yet, hope it's going to be better then my first experience. The slider of the fence had a broken part in the aluminum which is why I couldn't move it past 20 cm's. Very annoying but I have fixed it. Set-up with your video was quite easy however :)
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice kzread.infoUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
Good general setup video and is a keeper. Thankfully, the music is low key and not distracting.
Just bought this today in Melbourne Aus. $1199 inc the stand. Lets see how it goes.
@hamubice1551
2 жыл бұрын
Now that you've had it a year, are you happy with it?
Appreciate the video mate. Common problem amongst reviewers is the soft start failure. Any problems? Howzit running in general 1 year on?
Lovely
What is the difference btw between C10RJ and C10RJWAZ? My girlfriend order the latter but received the first.
Hmmmmm Looks like Hitachi/Metabo
How much does the saw weight on it's own without the stand?
@d.k.1394
Жыл бұрын
Heavy
Collin I just paid 999 with stand from Sydney tools Melbourne
Do you know what the measurement of the saw is when the legs are folded up?
@Notion8
3 жыл бұрын
50 cm max in depth
@d.k.1394
Жыл бұрын
Pretty big
Nicely done. I'm thinking of getting one and I found your vid to be very informative. How long did the blade last? Socks and thongs, how Aussie!
@d.k.1394
Жыл бұрын
Lol
Metabo in the US
@newbieshoplawn5836
3 жыл бұрын
Double check that it is the same. In Australia we also have the Metabo line of table saws and it is very different. For example it basically caters for a left hander based on the where the handles and switches are setup.
does this saw have a soft start?
@histguy101
2 жыл бұрын
yes, and brake
@d.k.1394
Жыл бұрын
Yess
not a good idea to use the mitre guage with the fence...not safe
Can anybody tell me what is the insert plate made of? Is it strong enough or shitty plastic like in Makita mlt100?
@Xboxers
2 жыл бұрын
It seems to be aluminum alloy or something like that. Atleast not plastic.
@d.k.1394
Жыл бұрын
Metal
why do DIY-people on YT always wear flip-flops..
@d.k.1394
Жыл бұрын
Lol
Just bought the Metabo
@B0r0
Жыл бұрын
Wait till you have problems.
@cpw318
Жыл бұрын
@@B0r0 that's true for every brand