Yo, it's me the guy that made the center tile. Abracadabra! I give you permission to share my tile that you modified for your Hero Quest bored!

Amazing work. I'm always impressed by how quickly you're able to get through multiple large painting projects, and your end results look very nice. Thanks for the video!

Thanks you for posting these videos!! They are excellent! Without them I would not have known about Dragon’s Rest and the Hero Quest 3-D printable board. Finally got mine all printed and primed can’t wait to start painting. I’m glad I went with the magnetized floor and pieces. I started with the clipped set but they kept breaking. I love the magnetized set! So thank you! I also built a gaming table similar to the one you did so thank your for posting that video as well

Amazing every time I watch your videos

Omg I love this so much! I played this game in the 90s with my family, and still have the original game and the original expansion packs which I now play with my own teenagers. This is incredible!

This looks amazing! Well done!

I think this is the best video you´ve made!! It closes and answers a lot of open questions from older videos. I´m really making the HQ board with your files. Just wish to share the progress with you. :)

@gaminggeek241

2 жыл бұрын

Awesome! Glad you are tackling this project--it's really fun!

Wow! Great job!! Thanks for sharing!

just awesome, good job!

That Board is insane. Well done

The gameplay part was actually really nice to see. I just got into this game and my 3D printer has been printing non stop for the past couple of days because of this. 😄😅

Amazing example of a pro tile floor . I printed all with Resin printer , it saves a lot of printing time .

Very inspiring. The end result is beautiful. I really like to color choices for some of the tiles. They pop, but are not distracting. IWith my kids out of the house, have started some painting, but I still don't have enough free time for a project of this size.

@gaminggeek241

2 жыл бұрын

Yeah, this project was only possible because COVID happened.

cool. I just played with my kids today. I have to finish paining some of the details :)

It looks amazing 👏

I'm super jealous. This is awesome.

Oh, that would be a fun game to play with the family over Chritmas!

I'm 53 and have played a heap of dungeon crawlers and fantasy RPG's since the early 80's, and have even made my own dungeon crawler...but I still love playing this game, it is a lot of fun and I would class it as a very good game...

Dragons rest tiles is amazing. I wish they had angled floors/walls though. Also didn't like how small my furniture looked on it. I ended up choosing kraken dungeon system as it looked so amazing thanks to one of your videos so thank you!

@alissadavis9676

2 жыл бұрын

Does anyone know how to get the antidote for the barbarian in "Heroquest troll avenger GAME PC"?

This is damn impressive

Oh man, a childhood dream come true!!

Gameplay is a little old, but still fun I think. I have downloaded the Tiles and mapping everything out now. I think I’m going to go with the round magnets, just have to make sure I get orientation right.

Thanks so much for this. I'm half way through printing this board and very much appreciate the tutorials and effort you have put in. I don't suppose you recorded much more of your painting for the board tiles? Very interested in your specific color choices and process as I will begin painting these myself soon and am quite new to this....

@gaminggeek241

2 жыл бұрын

Yes, I'm working on a painting tutorial video for the floors and should have it out next week.

@fuzz7981

2 жыл бұрын

@@gaminggeek241 Will be looking forward to that one. Thanks again.

@leandrodediaz

2 жыл бұрын

@@fuzz7981 Hey how long did it take to print all the tiles ?

@fuzz7981

2 жыл бұрын

@@leandrodediaz On average I was printing 1 full room piece per day. That took a few weeks as I had a couple of failed prints. The hallways, borders and edges took another few weeks. I am now around a quarter of the way through the walls/doors etc. It is a very lengthy process but the results do not disappoint. Btw, I am printing the fully magnetized set as I need to be able to pack it up easily to save space.

magnifique voire sublime

I adore the colors on this board - I appreciate how much board games design schemes work to show you that they're fun. Thanks for the suggestions on other dungeon crawlers, I love the idea of heroquest but also wouldn't want to play it.

Love the shirt. Geat video

This is impressive. That said I’d hate to set it all up more than a couple times. If it could stay set up that would be cool if you had the room.

@gaminggeek241

2 жыл бұрын

There is an option for a permanent board (actually uses less filament) if you aren't planning on using the tiles for other dungeon configurations.

Hey, amazing videos! How long did it take to print all the tiles ?

Any leads on decent proxy options out there? I'm guessing there's a million classic hero type minis but anyone know anything tried and tested?

Need to record a game of this with a couple people. Would be a hit

Awesome video! Still printing out my SlimBoard from DRQ......takes forever and 4 spools in. One thing. could you talk a bit more about the colors you used to paint the HeroQuest room floors....especially the two tone floors. You seem to have hit the originals pretty close so maybe you could save me the time of trying to find the matching colors.

@gaminggeek241

2 жыл бұрын

Yes, I'm working on a painting tutorial video for the floors and should have it out next week.

@pokemonmandag2108

2 жыл бұрын

@@gaminggeek241 That sounds awesome. i've bought a truckload of Vallejo paints, so i can try and hit your colors

Your movement with the app shows the number on squares you left. so at 15:38, you only moved 6 and had 3 remaining.

@gaminggeek when using your slim floors. The tabs on it only allow the walls to slide onto the narrower top part of them. Leaving a small game between the wall and the floor I don't see this issue in any pictures. Is this a change with the updated HQ board from dragon's rest or is it a print setting (the change seem much to big to be over extrusion. So far I've printed all the edge pieces before I printed all the walls and doors. And it seems the problem nay be even worse with some fireplace and dor pieces that won't fit on the pegs due to their different half circle hold for the peg. Is the walls now completely incompatible with the slim floor and I should ditch it for the regular floor and double walls between some rooms?

@gaminggeek241

2 ай бұрын

Hmmm... I think this is a question you should ask in the Dragon's Rest Discord community. More knowledgeable folks might be able to answer better than I can. But in the least, you could redesign the pegs to be smaller as needed, although that would be a pain to replace every single peg in software.

Great video!!!! Thank you! Question, what tshirt are you wearing? I dig it.

@gaminggeek241

2 жыл бұрын

I bought it at Gencon last year and can't remember which booth it's from--sorry!

That 1st goblin rolled a shield so it blocked the attack? You then moved the dwarf, 1 action, opened the door 2nd action, then moved him away which would of been a 3rd action?

In your furniture alternative piece part of the video, most of the items you said would work, actually should take up 3 squares not two. To compensate, I printed things like barrels and chairs and such to take up the extra square that my furniture from the new Heroquest doesnt stretch into.

@gaminggeek241

2 жыл бұрын

Yes you are correct and that's a great solution!

@jhardin1976

2 жыл бұрын

@@gaminggeek241 Not as great as your finished paint job and video, but I'll take the compliment! :)

Hi, how did you figure out to print the add on rooms? Mostly the Frozen horror ones. Thanks a lot

Awesome video as always, Question : How do you keep the map from scrolling when you try to move the hero's around the board in the app. Its driving us crazy and adding extra time to the game play , not in a good way. Thanks, Ron.

@gaminggeek241

2 жыл бұрын

I don't know if there is a lock feature in the app--didn't notice it much in my playthrough.

Did you have to use supports at all? Specifically, I'm wondering about the clip ports. I just joined the Dragon's Rest patreon and am printing your slim pegged board. I'm excited! Thank you for your work and content!

@gaminggeek241

7 ай бұрын

Nope, no supports. Unless you are running your printer with really hot settings, you won't need it for the ports.

@bradgibbons1062

7 ай бұрын

Thank you! Is there another way to contact you if I have questions or issues with files? If you're comfortable with that, of course. Please let me know. Thanks again!

@gaminggeek241

7 ай бұрын

@@bradgibbons1062 feel free to email me at gbummer@gmail.com or join the Dragon's Rest Discord where Ian can answer questions too.

great video, where did the alternate version of the wizard mini come from? looks like Zargon and much better than the one in the new or old box.

@gaminggeek241

Ай бұрын

That came from the Hasbro crowdfunder version of the new HeroQuest. Not sure if it went to retail or not.

That app is really cool. I wonder if someone could develop a similar app for non-dungeon crawlers too. An app for tabletop wargames like Warhammer for example.

great work, but where can I find the single border floor

@berbur1534

Жыл бұрын

have found it

So after all the iterations that Dragons Rest has made, is this still the best in your opinion because of the versatility? I’m considering printing this for my kids for Xmas and I’m really torn between the non-magnetized game board from DR and the magnetized one from DR. That being said I have a couple of questions if you don’t mind: 1) What is the overall size of your version of the HQ board? 2) As far as the 5mm ball magnets, I see a bunch of ball magnet “toys” on Amazon… will those work if I go the magnetized route? Thanks Gaming Geek. Appreciate your content greatly!

@gaminggeek241

Жыл бұрын

For ultimate versatility, I do think the magnetized version is the best but I will tell you that it is extremely difficult to buy 5mm ball magnets now due to the US saying they are hazards for kids swallowing them. If you are making the board exclusively for HQ, I would go the cheaper route and print the pre-made version with no magnets and the walls slotting in the pegs. Only do the magnets if you plan on creating other dungeons.

Now i really would love to have such a beautiful setup in my life. Do you sell all the files and the modded ones to get it as perfect as you've build it? I would really love to get some help here to get something like this realized. Thank you for this awesome work and effort you've put in there! This really is amazing and the best I've seen so far. 🤟 Thanks in advance.

@gaminggeek241

Жыл бұрын

All the files are available to you as a Dragon's Rest Patreon supporter. All of my modded files are also included in the Community Remix/Gaming Geek folder.

@DaMasta83

Жыл бұрын

@@gaminggeek241 cool. Thanks a lot! 😊

Can I ask where to get that Hero Quest LED logo from please?

hey... where did you get the Dashboards?By the Way - Dragon Rest is one of the best on Patreon for Dungeon Stuff ! But where can i find the Furniture for the Dungeons at Dragon Rest???

OK, this may not be the right video, but where do you get the spikes for the spike wall you have on the dragons rest patreon folder? I found the wall piece, but no spikes anywhere?

Has anyone played HeroQuest much on the Dragon's Rest board? There's some pieces missing which you'll only notice when playing a few quests. The issue is with the corners, when you have doors in the corners where the L corner piece is, and one of the walls is 3/4 length. There needs to be a couple of corner + door and corner + secret door, as well as a straight 1 3/4 wall.

@thedragonsrest

2 жыл бұрын

You should be able to find corner walls with doors in the walls folders. Drop me a message on the Discord discord.gg/a6swKdK if you want to clarify where the other areas are and I'll get something made to fit if it's missing, Ian :)

@HapaxLegomenon12

2 жыл бұрын

@@thedragonsrest oh wow, that must have been added since I printed everything out. I’ll take a look and I’ll jump on discord if I’m having trouble. Thanks! Finally got people to play it the other weekend and they loved it! Great work!

Can I ask where you sourced the spear trap wall piece from? Its not part of Ian's collection, at least as far as I can tell. Nice work on these vids, you were the inspiration for me to build one for myself, thanks.

@gaminggeek241

2 жыл бұрын

Yes, if you go to Community Remix/GamingGeek folder, it is the DUN Wall Trap Spikes file. Print that out and glue some toothpicks for the spikes.

Hey, I'm using Cura to slice the prebuilt rooms filles you have on Dragons Rest. What resolution did you print in: fine (0.1mm) or normal (0.15mm). Many thanks!

@gaminggeek241

Жыл бұрын

Actually, I printed in .2mm height. If you have the patience, feel free to do the greater resolution!

That's nice! What's your storage solution? Does Dragon's Rest also made a solution for this? Thanks!

@gaminggeek241

Жыл бұрын

I stick everything in plastic storage containers. Dragon's Rest doesn't make an STL for storage.

Need to print slightly bigger furniture. Is that made by Dragon's Rest since he made the tiles 1/2 an inch bigger?

@gaminggeek241

Жыл бұрын

Yes, his furniture is scaled to fit the larger tiles.

How do you get the walls and doors for the slim version of your floor tiles? What folder are they in?

@gaminggeek241

Ай бұрын

The walls for the slim floors are the same as the walls for the thick floors. You have the magnetized option (which requires you to print clips that will hold the 5mm ball magnet, which I alternatively use two 4x2mm barrel magnets instead) or the same floor but no clip printed. Does that make sense?

any idea how much resin would be needed to make a heroquest board using dragons rest stls?

@gaminggeek241

Жыл бұрын

I really don't know but I imagine it would be a LOT. Might be more cost efficient to actually buy an FDM printer. My project was about ten rolls of PLA which is about $220 and to do that with resin would be probably twice or three times that.

@colig54

Жыл бұрын

@@gaminggeek241 thanks, I think I will create my gaming boards using the Das quick drying clay, and some 3d printed texture rollers.

How did you create the awesome Heroquest logo? Can you do a zutorial on that?

@gaminggeek241

Жыл бұрын

Already made one: kzread.info/dash/bejne/nH2MyMdvhsacXbg.html

how many 2 length and 1 length walls are there for this setup?

@gaminggeek241

Жыл бұрын

Sorry, I didn't count. I think Ian has a build list that has the total number of walls needed so you can just make half of the total be 2 length walls.

Where did you get the player cards from? Did you make those too?

@gaminggeek241

2 жыл бұрын

The player cards come with the game. I have the 2021 Reprint. The card holders are from Uberstax.

First of all you did an amazing job with this board. I started to print your board a few days ago but im missing the center part is there any posibility to get the stl files of this part? Best regards Lukas

@gaminggeek241

2 жыл бұрын

Email me at gbummer@gmail.com

@lukasrau5011

2 жыл бұрын

Ok i wrote you 😉

@gaminggeek241

2 жыл бұрын

@@lukasrau5011 I don't see an email from you--can you send again?

@lukasrau5011

2 жыл бұрын

👍

Where did the files for pits and traps come from?

@fuzz7981

2 жыл бұрын

If you have downloaded all the Dragons Rest files you can find all of these things in the 002 Dungeon Set folder. The pit traps and blocks are under Utilities for example and the rotating room can be found in Custom Pieces. (Unless he's changed the file structure from a month ago)

Where abouts are the kraken studios furniture files found are they in the patreon for dragons rest or are they from elsewhere Thanks

@gaminggeek241

2 жыл бұрын

These are from Kraken's dungeon Kickstarter as stretch goals. You can still late pledge and get all the stretch goals for 30 euros: www.kraken3dstudios.com/late-pledge-fantasy-dungeons

@davidjohnston2509

2 жыл бұрын

@@gaminggeek241 thanks iv subscribed also where do you find the spikes for the spike wall as the stl only has the holes?? Thanks for the quick reply

@gaminggeek241

2 жыл бұрын

@@davidjohnston2509 Those are just toothpicks glued into the holes. Don't put toothpicks in the lower corners because it will interfere with your magnets.

What’s that app he uses on the tablet? Where do I get it?

@gaminggeek241

2 жыл бұрын

The app is free and you can download from your app store for either apple or android. I downloaded mine from the Google Play Store and use an app simulator on my Surface Pro.

Which 3D printer are you using?

@gaminggeek241

2 жыл бұрын

Prusa MK3S

Is the apps voice Mark Hamill?

@gaminggeek241

2 жыл бұрын

It does sound like his Joker voice but I couldn't find any information. If they did get Mark Hamill, you'd think they would have said more about it but who knows?

What 3d printer do you have?

@gaminggeek241

6 ай бұрын

I have a Prusa MK3S, Bambu Labs X1, AnkerMake M5C, and QIDI X-Plus 3.

Why do you have to use so many ball magnets? Cant you just use Steel Balls for the top of the floors and ball magnets for the rest? It would give you the same magnetic functionality with 50% less magnets used on the floors.. Also.. AliExpress has 5mm Ball magnets again..I just ordered 1000

Can I live in that?

Is this for sale somewhere online?

@gaminggeek241

2 жыл бұрын

If you look in the video description, there is a link to Dragon's Rest Patreon page where you get the STL files to 3D print if you become a patron for $6.

@Wizzard777

2 жыл бұрын

@@gaminggeek241 I was hoping to purchase the whole thing already printed/painted.

@gaminggeek241

2 жыл бұрын

@@Wizzard777 Wow, that would cost you a pretty penny--I know you can get it printed for you for about $500 on Etsy and to commission someone to paint it would cost another $500 at least.

@Wizzard777

2 жыл бұрын

@@gaminggeek241 I don't mind paying for it. I know it's a lot of work worth the $$ Yours looks insane. I found one online. They're asking $900. I just want to make sure I find one I really like. Thanks for your help!

I wonder what this would cost, printed and unpainted. Id pay $500 for it.

These things look amazing and very inmmersive, but in the practice, I find it very uncomfortable to play with.

too bad, two years after this video was made there is still no way to get a copy of league of dungeoneers. :(

Can u make me one ? Tell me your price.

@jhardin1976

2 жыл бұрын

Unpainted They would go for close to 450-$500. That's the non magnet thin tile version.

@stephanegrimard2687

2 жыл бұрын

@@jhardin1976 I see one on etsy non paint for that range of price. Really its a good price but i would like it with magnet.

@jhardin1976

2 жыл бұрын

@@stephanegrimard2687 Yup I'm aware. I've printed and sold a couple of sets :). The magnets would raise the price by another 100-150 because the magnets alone cost that much. They are difficult to source and are not cheap!

I love how he spends all this time and effort with the board and minis then totally disrespects the gameplay 🤦🏼‍♂️

I don’t get the excitement over this game. It’s so repetitive open the door. Wait for the monsters to file out. Rinse and repeat..