Here's how I DOUBLED my FPS in Grayzone Warfare (Maximize Visibility & FPS) Settings Guide
Ойындар
LIVE on Twitch most days between 6-7pm EST!
Twitch: / slickumss
Tiktok: / slickumsyt
Discord: / discord
In this video we'll be going over how I maximized my FPS and Visibility in Grayzone Warfare by going through each Graphic setting one by one to find out what performs the best!
Songs:
Hackers - Karl Casey @ White Bat Audio
Пікірлер: 73
Helped a lot! Thank you!
Thanks bro, it def helped.
@slickumss
2 ай бұрын
Of course!
This helped tremendously!
@slickumss
Ай бұрын
Glad I could help!
thanks man!
If you still prefer to use WIndowed Fullscreen over Fullscreen exclusive, at the very least enable G-Sync(If your monitor supports it) for Windowed Fullscreen in the NVIDIA Control Panel under the G-Sync menu. It is enabled for Fullscreen only by default. Also, note that using FSR on an NVIDIA card will have you crashing out of the game a bit more often. The alternative is using DLSS with Performance, DLSS sharpness on zero, and Post-Processing Sharpening at 200. (I recommend this for all NVIDIA cards below 4000 series if you crash). The reason why 4000 series should always use DLSS anyway is the Frame Generation technology (which is 4000 series only with DLSS). Do not use Frame Generation on FSR if it gives you input lag.
@explosion0254
2 ай бұрын
So would you recommend DLSS with those exact settings for my Nvidia 3070ti? Currently I’m using TSR and it fixed the crashing issue I had with FSR but my frames are poor (25-45)
@drewbienewbie03xx81
2 ай бұрын
@explosion0254 mess with the quality settings. You can go as low as 30 for higher fps.
High and up for shadows creates a haziness that at first looks brighter but it actually isnt. Its making it much harder to see detail as it makes everything fuzzy. Drop it to medium and have a buddy run out to a designated spot in the trees. Mess with the shadows and youll see what im talking about.
i run a pretty solid 100 - 110fps on 4k with all settings on high and DLSS set to balanced. 12900k and 4090, both watercooled. gpu doesn't get over 52 degrees. considering its still early access, i can't complain much about that. 5000 series gpus are just around the corner. the game randomly disconnecting when you're on a body retrieval and losing all your stuff is more of an issue.
ty
I'm running a 12700k with a RTX 3080. Running FSR with NativeAA made my FPS from an average 40-60 to 80-120. High FPS with good quality. Thanks!
@joshuamorgan8828
2 ай бұрын
I have the same specs but I still cannot break 65 very often at all
@FriZ..
2 ай бұрын
@@joshuamorgan8828 chech your storage make sure it’s not full, check your 3d settings in the nvidia control panel. I’m running an average of 100 fps in most places and about 80 in highly dense areas like tiger bay and midnight sapphire.
Problem with FSR is that the frames generated aren’t even actual frames & what I mean is those filler frames made by the AI from FSR are just that, filler. New information or what’s happening in game won’t be reflected in those filler frames, and each time you’d normally dip in fps around certain areas, you’ll get more AI generated frames, which will increase your input lag like crazy. Also, FSR is unreal engine 5’s kryptonite at the moment as it constantly causes the game to crash. If you really wanna run FSR, put a 60-120fps cap, put reflex low latency “on + boost” and ofc full screen your game. It’ll help with input latency, keep the game smooth, and it’ll reduce the amount of times FSR will make a crap ton of AI generated frames which = less input latency when you need it the most 👍🏻. If it’s blurry, put your sharpness to the max
my biggest problem with this game is the terminator AI. They can see you through bushes and can 1 shot you with an iron sight AK from a good distance away
how do u get the fps counter in top right is it the in game one?
@slickumss
2 ай бұрын
Yes it’s the in game fps counter
@evergreenegamingandreviews
2 ай бұрын
it's in the game settings
FSR NATIVE AA need double performance xD so no quality is for mid systems atm the best way.
TSR with 70% 3D scale ...quality set on HIGH ...most StABLE UPSCALLER now ...no lag, no stutter, no crash ... No input lag ...everything is CLEAR ...
I got a Geforce 1080 Ti, is it gunna blow up if I do these settings? I know I gotta upgrade soon lol
@ayanokoji4672
2 ай бұрын
do same settings but do 720p of full screen resolution
I tried fsr, my game would crash as soon as i got into town. I switched back to dlss and im getting 60 to 80 fps and no more crashing. 3080 ti, i9-10900f
@explosion0254
2 ай бұрын
I’ve got a 3070ti and I was crashing using FSR as well. Now I’m using TSR but I’m not very happy with the 25-45 frames I’m getting. Should I try DLSS?
@danestrada2522
2 ай бұрын
@@explosion0254 i would try it, Im on a 3840x1600 monitor. All my settings are on medium, expect shadows and textures are on high. Post processing on low, sharpening at 50. Dlss on with balanced. Scoping in i do get frame drops, but the devs will have to do something about that. Is what it is, you will have to find the balance between performance and image quality, everyone’s going to be different.
I am running everything on epic and have next to no issues, just a couple spots where she drops down in frames mainly in free rides when near bodies of water.
Everything low except medium textures, FSR with native aa and fidelityFX on, set fps to 30 and you should get 60 fps consistently.
My fps is fine the game looks blurry itself I can't fix
WENT FROM 40-50 fps to 80-90 fps just by going to fsr from dlss
ya i got a 3060 and i cant play it :(
And what about settings for those specs ? Ryzen 5900x Gigabyte GeForce rtx 3060 12GB 16GB ddr4 3200mhz ( clocked to 3600) Coolermaster 1440p G-sync monitor 165gz Samsung ssd 120GB Samsung evo nmve ssd 500GB Be quiet 650 psu
Quick tipp: i crashed 5 times in a row with FSR/DLSS enabled and lost my stuff, went back to TSR - AA to Epic, enabled G-Sync, my frames went from 120 to 60. The game looks better, feels better to play for some reason?! And the best thing, i haven't crashed once. If your PC is some High End PC, get rid of FSR and DLSS (DLSS only for 40 Series)
@slickumss
2 ай бұрын
One of my mods had this issue as well and TSR fixed it for him as well. Totally forgot to mention that!
@unrulybill
2 ай бұрын
Going to try this now
@Daniel_W..
2 ай бұрын
@@unrulybill did it work?
@explosion0254
2 ай бұрын
@@Daniel_W..I can confirm TSR was able to drastically improve my crashing problem. But my frames are noticeably down, I’ve got a 3070ti and only get 25-50 FPS
@Daniel_W..
2 ай бұрын
@@explosion0254 I am able to get 60fps with a 3080ti, i never played anything below 100fps. It is poorly optimized. Maybe you can overclock your GPU, or some nvidia system changes, power option so you can reach at least 60.
DLSS is no good with my 4070ti, it sits around 70-80fps. With FSR it’s 150-160
@Crazzzycarrot-qo5wr
2 ай бұрын
Its because of frame generation. Sadly, it seems to add sever inputlag.
Playing high settings on a 3060 12gb 60fps with dlss cant stand FSR woth frame gen feels worse then dlss 50fps
@Gliduh
2 ай бұрын
yup same. feels fake and input laggy
@Colourbright_xo
2 ай бұрын
@@Gliduh yeah thats what frame gen is sadly they arent real frames just ai generated.
I have a 1070 and can play this game
I have a 3070 ti and have 80fps average with dlss on...
@slickumss
2 ай бұрын
Try FSR!
@dennisnijhof6481
2 ай бұрын
ur lucky.. have the same card as u with a i7 9700k so i match their recommanded hardware.. have the game on an SSD. still have only 30 fps in main base.. its unplayable.. it doesnt matter if i run on DLSS or FSR.. fps is just not there at all.. while in chopper for the first time my game was at 1 fps the whole flight.. i thought i crashed but when the chopper landed it was back on 30 fps. i expected more for this game to have the Recommended hardware..
@belalugosi7561
2 ай бұрын
@@slickumss it work better with fsr and i got like 120 steady but not sure if is the game it was crashing a lot so i return to dlss
@belalugosi7561
2 ай бұрын
@@dennisnijhof6481 in my case I have a 12700k i7 and 32gb ram 3200 mhz but if u running dlss try performance or quality for me run fine with quality at 80fps steady
@stoonyy4148
2 ай бұрын
@@belalugosi7561 RTX 40 Series DLSS and RTX 30 Series FSR because The 30 series does not support DLSS =) HF GL Greetz
yea, wait till the game gets optimized, which is probably never. That's why I refunded after 52 minutes of laggy crap and crashing in helicopter and all that. It's bad. And all that on low settings.
@unicornvette9790
2 ай бұрын
Games been out a couple weeks and they’ve fixed a lot. To say it will never be optimized is just crazy. Go back to COD or upgrade that hunk of a PC because I haven’t had any issues crashing.
@landonschneider9704
2 ай бұрын
i’d say try it now, testing different settings, remember it JUST came out and the devs have already released 4 hotfixes covering most of it and optimizing, give it a chance because it is a fun game
spreading misinformation like every other content creator
@slickumss
2 ай бұрын
Explain.
@jamesyak52
2 ай бұрын
@@slickumss FSR causes tons of lag when aiming. stay with DLSS
@slickumss
2 ай бұрын
I get lag when aiming no matter which setting I use. I’d rather get over 100 fps and lag while aiming than get 40 fps and still lag while aiming.
@SlumLord-
2 ай бұрын
@@jamesyak52fsr is fine just don’t use Frame gen and if you can handle 60 fps till they optimize the game then no big deal I have no aim stutters
@VirtuaSavage
2 ай бұрын
Yeah I love the ugly ass scope view when using FSR and Frame Gen. I tried both and prefer just staying at DLSS and have way less latency.
Frame Generation on shows that this Guide is ass
@slickumss
2 ай бұрын
It’s not necessarily a guide, just showing what helped me get more frames. Cry about it.
This game is shit
Oh wow this really really works guys , thanks man 🦾