It's always the most superficial issue, the vid was clear and concise. Love the title as well. Life saver!

This video saved me, Thank you so much it was clear and concise

Thank you so much. This helped me a lot when I was panicking.

Thank you! This helps me struggling with the lines and etc.

Thank you, this helped a lot for my imorting drawing into Revit!

You saved a lot of my time buddy, keep doing

Thank you !! almost saved my assignments

you are awesome!!!! i've watched so many videos and your video really worked. I been having this problem for a year!!! Thank you very much!

@youcandraft

3 жыл бұрын

Awesome! Glad I could help!

Thanks a ton for saving my time! Really appreciate it!!!

Thanks that worked, i knew how to do it on much older cad, but this new version I'm learning, commands are different, in the old cad you typed properties or just P, then E for elevation and set to 0, and it was done, now you have to go through the properties menu.

@youcandraft

3 жыл бұрын

Yeah Autodesk has a way of making old methods obsolete. Glad I could help!

Thanks a lot for this video, it was very useful for me.👍

Thak you very mcuh sir

Thanks it helped a lot for my project thought that it was a virus of sone sort … thanks

I am crying . Thank you so much 😭 💞

Thank you so much. It saved my life last night ;)

@youcandraft

3 жыл бұрын

Glad I could help!

Awesome!!!! Thank you !!!!!

Thanks, you helped me a lot! By the way, your voice is gorgeous!

@youcandraft

3 жыл бұрын

lol thank you, and I'm glad I could help.

thanks man u helped me alot through this vdo ......one day u will reach millions of subs man

@youcandraft

3 жыл бұрын

Thanks!

thank you very much!

Amazing Thank you sooo much

the fps cured my anxiety

THANKK YOUUU VERY HELPFULL

Thank you so much

THANK VERY VERY MUCH ! YOU DON'T KNOW WHO YOU SAVE ME !

Thank you very much ..

Thanks a lot 🙏🙏🙏

You are a Goooood Tutor. Have a good communication skill

@youcandraft

2 жыл бұрын

Thank you.

thank you!

thank you so much

please help me with dimension line, how to correct that

dude thank you from my hart

thank you bro

Great tips! But what about encountering this elevation issue with SPLINES? I am stumped.

@youcandraft

2 жыл бұрын

If all the nodes of the SPLINE are the same elevation I would recommend simply moving to the correct elevation. SPLINES are tedious because you need to select each "fit point" in the properties window and adjust the Z coordinate.

Thanks bro!

THANK YOU SO MUCHHHH

thank you so so so so much

How do i do it for 3d faces in the plans and also in my text position z is not pressable

@youcandraft

3 жыл бұрын

For the text, edit the value for "Text alignment Z." For 3D faces it's a little trickier. You have to edit the Z value of each vertex. You can select each vertex from the properties window when selecting your 3D face.

This helped me out a great deal but have one more huge mystery, after getting all of my lines, circles, text, hatch etc into plane Z, I have dimensions that are now NOT in plane Z and I tried going through those properties but can't figure out how to force the dimensions back into the Z plane??? Any advice there?

@youcandraft

Жыл бұрын

Unfortunately dimensions don't have Z values. Dimensions are created based on the current UCS. Most of the time this is set to the default WCS at 0,0,0, but if your UCS is set to another elevation, say 100 feet, then your dimensions will be drawn at that elevation. The only way to get them back to the 0 elevation is to manually move them.

@shawnlewis1918

Жыл бұрын

@@youcandraft That's what I was afraid of, as many as I have it may be quicker to just dimension the 0 plane lines now that I have them all located at one level now. Thanks a LOT on the quick response!!!

Graciassssss!

This problem seems to appear in CAD quite often over the years in every firm I have worked in. Checking the properties command still shows that the Z coordinates are both set at ZERO, yet the non-coplanar issue still persists. Still unable to correct the issue.

@youcandraft

Жыл бұрын

It's possible that it may not actually be 0 due to a rounding issue. Try manually entering 0 into the Z axis if you haven't already. If that doesn't work it could be a deeper issue that's hard to solve without context.

@kirk8321

Жыл бұрын

@@youcandraft Thank you for your help!

thanks this help me

Hello . thank you actually i use this trick but it won,t work when i select many items the start Z and end Z or elevation won't appear again . do you have any trick to set the elevation equal to when selecting the whole plan

@youcandraft

Жыл бұрын

When you select different object types together the Properties window will not show elevation information. You need to click the drop-down list at the top of the Properties window and select each object type, 1-by-1.

@riadelzoghby4502

Жыл бұрын

@@youcandraft Than k you I select separately lines circles poly lines objects etc

Thank you

@Jaideepsvazirani

3 жыл бұрын

Hi, kindly help me figure a few issues, firstly as you mentioned go to properties and see ALL, to start with I am in able to figure that, followed , I am unable to see the geometry details, X , Y, Z. Kindly suggest what is that I need to do .?

You saved my 5 hours

@youcandraft

3 жыл бұрын

Awesome! Glad I could help!

thanks bro

Yes, I tried that, it shows as all on one plane.

keep going

what about spline?

@youcandraft

3 жыл бұрын

splines are tricky because they have "fit points" that can be adjusted in the z-axis. You can change the elevation of each fit point within the properties window. If all the fit points are at the same elevation you can also simply move the spline to the correct elevation.

❤

FLATTEN comand

@youcandraft

3 жыл бұрын

Flatten is not the same thing. Flatten converts 3D objects to 2D.

thank you!