Thanks for showing what kinda motor it has inside. Considering on their website it shows picture of 2607. It’s nice to see the 2610

@graffics7665

2 жыл бұрын

SushInk Tattoo no problem! I show info I want to know but can't find. The motor is the most important part IMO. I have to make a couple more videos of the Falcon & Mast Shuttle (now that I got it apart) machines when I get a chance

@sushinktattoo1366

2 жыл бұрын

@@graffics7665bishop shader has 2607 motor. What a ripoff for $600. Lol you can buy any pen with Japanese 2607. Slap bishop 3.5 stroke on it and you have a bishop shader. I think a great combo for me would be 2610 with 4.0mm stroke for lining and 2607 with 3.5 for shading. Speaking of. Do you know if “hello” pens that are sold with RCA connection only (no battery) are same as yours ?

@guiemink

2 жыл бұрын

@@sushinktattoo1366 Good question about Hello RCA one, I’m gonna receive mine in the next days and I’m gonna tell you what is inside

@graffics7665

2 жыл бұрын

@@sushinktattoo1366 this one did have av4mm stroke for sure.. theres ones that are sold on aliexpress that look like bishop wands- they're on ebay too but only from China. I ordered an rca adapter from aliexpress- i actually saw one on there without the battery that comes with a faulhaber motor but i think normally it comes with a 2607 i thought (don't quote me on that cuz I'm not positive)

I plugged you in my ReelSkin Seconds video made, brother ..just a FYI

@graffics7665

2 жыл бұрын

Thank you brother!

Hello Grafics76, I firstly bought Mast Shuttle that I prefer over my Wand Liner, and then bought the Hello copy of the bishop without batteries. I would like to buy the one in the video, does it comes with 4.2mm stroke? The seller told me that but no information about it... And do you know which motor is the most reliable please? Thanks 🙏

@graffics7665

2 жыл бұрын

Guilhem B*** It actually came with a cam I didn't like so I put an ambition 4mm cam in it. I'm not sure what the original one was but I assume either 3.5 or 4mm. How do you like the Shuttle? I just made a video about taking mine apart to see what motor was in it. I'm not 100% about what motor is best but I know the faulhabers that they put in some of the machines are good, the 2610's are good & the 2016 runs pretty strong in the Shuttle.

@guiemink

2 жыл бұрын

@@graffics7665 Nice! I’m gonna check it right now! How did you opened it? Mine was glued

Hello Brother. After our last conversation, I became interested in the hello machine. Do you plan to shoot a video about the machine?

@graffics7665

2 жыл бұрын

Mustafa Gündüzgil yes I can do another video about it. What would you like to see? Also I just ordered the Falcon1 wireless machine gravity voltage control. It's the same machine as the Thunderlord K6015 machine. It looks very well made. I also eventually want to add a faulhaber motor to one of those two machines. I'll make a video about that also.

@mustafagunduzgil7262

2 жыл бұрын

@@graffics7665 ok thank you for that. I've never heard of the machine you're talking about. it would be nice if you make a video of it. I'm also waiting for the video of the ambition soldier machine hahahaha

I Like your Content,so informativ and great.i have a Mast Shuttle and for this price its insane what she can.she works so great for bright colours pack and solid lines.what is inside for a Motor because he had so much Power,more than a cheyenne thunder for 500 Euros.

@graffics7665

Жыл бұрын

@Holger Scharfenberg thank you! I haven't uploaded any videos lately because I've been super busy but I'll try to get some new stuff out soon. Are you from Germany? I ask because Your KZread name is that medieval castle in Germany. I love that stuff!

Faulhaber is the best motor in my opinion....we all have diffrent opinions so before anyone gets butthurt remeber that!what I absolutely love someone might hate and what you love I might hate...but so far out of all the machines I've had and still have that's definitely my favorite with a 4mm stroke

@sushinktattoo1366

2 жыл бұрын

That’s true. The Faulhaber that comes in CNC is 2w. Max power of 2607 Faulhaber motor is 4w in more expensive machines. Has to do with how they program it. Japanese 2607 motors are actually more powerful then that. in basic format have 4.7w. Swiss format 5w. And German format is 6w.

@vapestar3705

2 жыл бұрын

@@sushinktattoo1366 every Japanese motor ive had ends up given out...Swiss motors are absolutely awesome as well but ya juat can't turn them up to high or the motor will stall on ya.i absolutely hate cnc but I seen it had that German motor in it n I wanted to give it a go before I grab a bishop wand.but I have so many machines now Idt I need to buy anymore lol.plus I love my exo my flux and all my bronc machines are troopers....anything bronc hummingbird or bigwasp I'm good with.the cnc p6 wasn't bad for lining at 4mm but other then that I wasn't found of it either but it lines great and hits hard

@vapestar3705

2 жыл бұрын

@@sushinktattoo1366 I would like to find another machine that has the German motor in it that's not a cnc and dosent run 6 7 and 8 hundred doll hairs lmfao cause let's be honest here my bronc v7 and bronc v10 I'd put up against much much more expensive machines and my v7 n v10 would do just as good id not even better performance wise for a fraction of the cost.....so I'm open to any suggestions of a great machine with a German motor in it that's not 5 6 or 7 n 8 hundo

@sushinktattoo1366

2 жыл бұрын

@@vapestar3705there is no other machines with German motor. Only the Faulhaber is actual German motor. If the listing says “german” motor it means it has Japanese high watt motor. If the listing says “Swiss”. Not maxon just “Swiss” it has slightly lower watts but still better than plain china configuration. China, Japan, Faulhaber Germany are your only options for any number motor

@vapestar3705

2 жыл бұрын

@@sushinktattoo1366 so this new "German motor" that's in the cnc p6 it's the same German motor?

If you take apart the ambition soldier then take apart the hello machine u will see why it's a cheaper machine.in all honesty it's only about a 40 dollar diffrance and ya get better quality out of the soldier.if u order from them or on Ali express u get the getman motor instead of the Japanese motor and man what a diffrance!but if it's just to learn I gwt what your saying man.i just picked up my first exo and I gotta say I see what all the hype was about cause it's flawless in every way dude!but I still love my bronc v10 v7 and of course I'll never get rid of my bronc v1 n v3 those machines mean alot to me....but if ya want to man get in touch with me and I'll show ya a trick to where u can get the better motor for your machine n it's easy to replace.

@graffics7665

2 жыл бұрын

Vape star whats your IG? I'm down to learn whatever I can, thank you! I was thinking the Ambition Soldier was made better than this when I saw the cam in the hello machine. I do have another Ambition wireless (I made a video) & it runs smooth as hell! I would like to get either the ninja or flux clone next though.

@vapestar3705

2 жыл бұрын

@@graffics7665 amazon has the flux clone but it's a "hello" but comes in the xnet case with the Jumpstart newer battery.i love the titan man its beautiful

@graffics7665

2 жыл бұрын

@@vapestar3705 Thank you for letting me know I hate waiting for shit to come from China...what's the hello flux clone called? I was looking for it but can't find it.

@vapestar3705

2 жыл бұрын

@@graffics7665 Xnet Rotary Tattoo Machine with Japan Coreless Motor 1950mAh Battery Power - Wireless Tattoo Machine Pen with Digital LCD Display Tattoo Supplies and Equipment for Tattoo Artists

@vapestar3705

2 жыл бұрын

@@graffics7665 I copied and pasted for ya...it just comes with the better battery now

Do you have the link where i can buy the reel skin?

@graffics7665

2 жыл бұрын

Jonathan Julius here it is- reelskin.com/ I just added it in my description also

@jonathanjulius1903

2 жыл бұрын

@@graffics7665 thanks man 👍

@graffics7665

2 жыл бұрын

@@jonathanjulius1903 you're welcome. Thank you for pointing it out. I have to remember to add links when I do reviews.

Dont buy, the motor went out on the first day, I returned thru amazon for another (which was hassle free). That one gave out during a tattoo and had about 35 hours of tattoo time on it. Not reliable. But man, it was a great machine while it lasted, I only wish it at least lasted a year.