Heat Shrink Cable Joint - 11kV 3 Core XLPE & EPR High Voltage Cable Joints
Ғылым және технология
THORNE & DERRICK INTERNATIONAL | SHRINK POLYMER SYSTEMS UK MAIN STOCKISTS
Contact us for Competitive Prices & Fast Delivery from Stocks
To See The Full Shrink Polymer Systems Range That T&D Offer Click Here -
www.powerandcables.com/manufa...
SPS 11kV heat shrink cable joints are tested and specified to joint high voltage 3 core power cables with XLPE or EPR insulation and steel wire armour (SWA) and steel wire braid (GSWB) - cable joints can utilise either compression connectors or mechanical shear bolt connectors.
To See The Full Range Of High Voltage Cable Joints, Terminations & Connectors Click Here -
www.powerandcables.com/produc...
11kV heat shrink cable joints are ideal for direct burial, overhead and vertical cable jointing of 3 core cables.
T&D provide both stock and manufacturing solutions for a broad range of offshore and marine specification cable joints including standard cable joint products to BS6883, BS7917, NEK606, IEEE1580, MCGH and IEC60092-3, including options for flame retardant and fire resistant cables to IEC-60332 and IEC-60331.
SPS high voltage cable joint kits are designed and tested to BS7888 and Cenelec HD 628 S1 and HD 629 S1 - HV cable joints kits are available to joint XLPE, PILC, PICAS, EPR and Triplex high voltage power cables at 6.6kV, 11kV, 15kV and 33kV voltages.
17.5kV, 24kV and 33kV 3 core cable joints utilising heat shrink technology are also available.
SPS Heat Shrink Cable Joints & Cable Terminations - Quality Performance Testing: Shrink Polymer Systems heat shrink cable joints and cable termination kits are tested to BS7888 which incorporates Cenelec Standards HD 628 S1 and 629.1 S2 : 2006, DIN VDE0279 and IEC60502.
BLOGS | Cable Joints & Terminations
High Voltage Cable Joints
www.powerandcables.com/highvo...
Some Thoughts On MV HV Heat Shrink Cable Joints & Cable Terminations
www.powerandcables.com/heat-s...
MV Cable Accessory Technologies | Heat Shrink, Cold Shrink & Push-on
www.powerandcables.com/mv-cab...
3M Terminations | Surface Tracking on Medium Voltage Cable Terminations by 3M Electrical
www.powerandcables.com/3m-ter...
Cold Shrink vs Heat Shrink - The Real Difference
www.powerandcables.com/cold-s...
#heatshrink cablejoints #11kv
THORNE & DERRICK INTERNATIONAL
Thorne & Derrick International are specialist distributors of LV, MV & HV Cable Installation, Jointing, Duct Sealing, Substation & Electrical Equipment - servicing UK and global businesses involved in cable installations, cable jointing, substation, overhead line and electrical construction at LV, 11kV, 33kV, 66kV and EHV.
Stocking & Supplying Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV | UK & Export Sales
Phone: +44 (0)191 410 4292
Email: uksales@thorneandderrick.co.uk
www.powerandcables.com/
Пікірлер: 1 000
Being a retired electrician, I can tell you that is a back breaking job out in the real world. That cable weights a lot and it man handles YOU. Vid is a good one for showing how it's done, and I wish it was just as easy in the real world. He did a great job on that cable.
@FoodOnCrack
7 жыл бұрын
yeah this video is a best case scenario, inside, cable nicely elevated from the ground and supported....
@samuelencanacion74
5 жыл бұрын
Definitely not that easy in a manhole/vault, and that's me doing single conductor 1mil mcm
@davep6977
5 жыл бұрын
When I did 3 phase splices, I always staggered my butt joints
@wb5mgr
5 жыл бұрын
I've seen it done standing in a trench while a sump pump was running to remove the water the guy was standing in... not exactly laboratory conditions...
@nh2805
4 жыл бұрын
@@davep6977 this is a high voltage joint,you cannot place connections where u would want..there are strict measurements the jointer must follow
Now I can splice my 11kV primary line for my new secret laboratory. I origionally ran my primary too short. This will solve my problem so I can resume taking over the world.
@MouseGoat
7 жыл бұрын
Just watch out for annoying sisters and/or midget rivals.
@suibora
7 жыл бұрын
dexters laboratory lol
@user-rn5ip9ec6j
4 жыл бұрын
@Eìon O'hInneirghe ha ha ha ha ha haa
@pammullinsx6026
4 жыл бұрын
Learn how to spell "originally" first, then think about taking over, please.
@trevorvanbremen4718
4 жыл бұрын
Just a heads up for ya on your 'world conquest'. It's going to take a LOT of effort to get past my 500kV energised faraday cage I've built as a 'panic room'. I guess you COULD just wait for the batteries to run down, but since Elon Musk grabbed all the Li-Ion cells, I chose to use a Thorium-based LFTR inside the cage instead. Given the half life of my Thorium stockpile, I think I should be god for about 13 or so billion years
I don't know what it is, but these industrial cabling demonstrations are friggen fascinating to no end.
@MrSheaonemillion
8 жыл бұрын
+phuturephunk i have little to no experience in anything electrical. i'm kind of handy, do my own work on the car. For some reason i've been watching the shit out of these!
@GTOMEX110
8 жыл бұрын
Yes they are I'm an electrician and this are very critical connections you have to be trained how to do them
@DoRC
7 жыл бұрын
phuturephunk ok good I'm glad I'm not the only one that fell down this rabbit hole.
@aayushrathod4029
7 жыл бұрын
phuturephunk
@bigmike1009
7 жыл бұрын
Live LV jointing is more fun especially on old lead cables
Today once again the KZread algorithm has reunited us here to watch this random video at 3am
@Jason-wm5qe
3 жыл бұрын
I can relate to this
@marcosramirez7595
3 жыл бұрын
Damn right... 1:36am I was watching tennis games.... Then this
@sincezver
3 жыл бұрын
Пор до р за ми для лендинга на о
@SpeedomusicSM
3 жыл бұрын
😅😅😅
@charliederrick1583
2 жыл бұрын
This is my dads company i too do not know how this has happened
To all electrician in this world, you have done great job to keep this world running.
@lobbyhoe01
Ай бұрын
since no one said it yet, on behalf of every proud electrician: thanks!
Me: “I’m not going to watch the entire things.” Also me: *watches entire thing*
Look at how methodical this gentleman is with every point of the work process. This is almost medicinal. Electrical high voltage installations deserve the utmost attention and highest standards. Long-term safety first.
im just here soldering 12v dc connections
@Devil_inside-
5 жыл бұрын
😄😄😄😄
@stevenkaiellie5821
4 жыл бұрын
😂😂😂😂
@Lewdacris916
4 жыл бұрын
hope you are using heat shrink :P
@TronicYaka
4 жыл бұрын
@@Lewdacris916 or at least heat sleeves :D
@ElectroniQ
3 жыл бұрын
Heavy Duty 12v DC connections xD
Can't believe I watched that whole video.. and enjoyed it. How did I end up here anyway?
@SD-pu5yp
8 жыл бұрын
This is true, but it might be more of a sales pitch. There are lots of manufacturers of cable joints so they were probably demonstrating how there joints are done. Compared to say a raychem, sicame or tyco joint. Someone might see this and say that's quicker than the joints they use. Or it might be a training video for apprentices.
@IsaacOLEG
8 жыл бұрын
+John Bobrek they did get the bad guy and send him to jail :)
@hokiepokie333_CicadaMykHyn
5 жыл бұрын
And can you believe, that this guy gets paid only in tips! That's why the women become dancers.
@derek-stader3445
4 жыл бұрын
It’s funny you said that John Borneo as I was thinking the same thing!! Haha! I’m in the electrical industry so naturally, I was mesmerized ✌️🤓
@pascalcoole2725
4 жыл бұрын
Same here
And I thought I was a hero when I repaired the end of a garden hose this weekend...
@omaraljnaby7053
3 жыл бұрын
😆😆😆
Very amazing tbh, did not think its so complicated. Alot of work going into this :)
Oh god , this takes me back to watching AEP safety videos , those guys are always working in a perfectly dug out ditch with no mud or water , rubber blankets everywhere with plenty of wipes , 🤭😂🤣😂 that never happened for me at any point in my career. Still kept the power on for people tho 👍🏾 , people are always happy to see the power guy as long as he is there to turn you back On and not Off .
That would be a pain in the ass if you connected the wires and forgot to slide the shrink wrap on first.
@freddiemaxwell8959
8 жыл бұрын
+99beta Exactly what I was thinking. That step should have been in the first part of the video.
@PlasmaHH
8 жыл бұрын
+FREDDIE MAXWELL you mean the part at 0:11 ?
@yavvkolev7502
8 жыл бұрын
Not a big worry, there is zip heat shrink, that can fit on a cable without sliding.
@KurtRichterCISSP
8 жыл бұрын
What a world! :D
@Engineer9736
7 жыл бұрын
yavv kolev It may exist (good info!), but your boss probably wants you to follow the company workinstructions :-)
How many layers of protection do we need? Engineer: *YES*
@gorillaau
3 жыл бұрын
Engineer2: More Layers!
@ArthursHD
3 жыл бұрын
11kV 3 Core XLPE & EPR High Voltage ⚡ If you do it above the ground than one layer of air is sufficient :)
@nwgd
3 жыл бұрын
@@gorillaau more!
@mohammedvlogs1978
3 жыл бұрын
What is need for safety this connection after not any problems
@badwyahmed9446
3 жыл бұрын
@@ArthursHD فبررر
I won't even be doing something even close to this big ever so I dunno why I watched but it was fun! Best job I ever seen done !
Bravo pour l'électricien qui a raccordé cet câble 👍
Синей изолентой сверху забыл.
This is how engineers imagine it's done in the field
@MrKristyon
4 жыл бұрын
How does it actually work in the rain and mud?
@element-1254
4 жыл бұрын
@@MrKristyon pretty badly
@bigredc222
4 жыл бұрын
Try doing it without all those special tools, just a utility knife and a tape measure. We were replacing a five kv line at a veterans hospital that shorted out, we worked about 30 hours strait, half of it in the rain, I made up one end, another guy made up the other end in a vault underground, I guess he was too tired, we turned it on, and it blew the man hole cover about 50' in the air, so I had to do his splice all over, it held the next time we turned it on, that was a bitch.
@Guust_Flater
4 жыл бұрын
@@MrKristyon Yes. In the field they build a tent first.
@mikewillard4073
3 жыл бұрын
20mins per joint - this video proves it
Extremely Excellent You proved, Practice makes a man perfect.
Love to see this done in a howling gale and lashing rain ! . Its a big boys version of what I would do on a mains cable
@mfx1
2 жыл бұрын
You wouldn't do it in those condition, you'd set up a tent or worst case wait for better weather.
@booboo699254
2 жыл бұрын
@@mfx1 I'm sure that's what he meant... with a tent. But howling gale and lashing rain would still be happening and making the work difficult.
Some day, I'll be out drinking and the power will go out. That's when the skills I learned today will come in handy.
me when I'm trying to glue my headphone wires back together.
@valyardelean
5 жыл бұрын
lol
Mufa zrobiona idealnie! Piekne wykonanie! Pozdrawiam :)
@superwelder24
2 жыл бұрын
Sama jesteś Mufa
I was a 52E in the Army and doing this was part of the duty description. This is slow, tedious work and made even worse, far worse in the field. Great video guys! 🤙
I so enjoy watching nonfiction videos.
So two really big wire nuts are out of the question, I'd imagine !
Love watching these types of videos. It is an art to be able to do this kind of work cleanly and precisely.
Look at that work man looks flawless
*pulls out massive soldering iron* I've got this guys!
@jaredgrant1067
3 жыл бұрын
15 watts is massive, right?
I was waiting for him to pull out a huge heat gun lol. I use a lighter to melt my shrink wrap, his was a little larger.
One of the coziest video in my collection. Often watching it before sleep
I love these (pre- Internet) VHS videos demos.
I've got these as my speaker cables
@pmgodfrey
8 жыл бұрын
+Voima More importantly, did you use cable elevators to elevate the cables off the ground as not to cause interference and static buildup? Did you break in your wires for 96 hours? Are you using oxygen free copper? lol
@BenCos2018
4 жыл бұрын
@@pmgodfrey lol
I dont have the slightest idea what any of this video is about. OR why I watched the entire thing completely mesmerized.
@daveissound
8 жыл бұрын
+Michael Stevens (LeFevre) its the music
@MrSheaonemillion
8 жыл бұрын
+Michael Stevens Same, check out High voltage cable termination vids, its like porn i dont get it, but its So Good.
@DavidG2P
5 жыл бұрын
@@MrSheaonemillion is this a new trend, like watching ASMR?
@MrSheaonemillion
5 жыл бұрын
@@DavidG2P if it is I wouldn't know, i have never known what's cool or trending.
Great Video Thorne Derrick! We are going to embed on an informational post for our 250 KCMIL through 6000 KCMIL High Voltage Cable. Good info!
Here we are again by youtube recommendation.
I just realized, I watched this for 19 minutes..
Excelente trabajo me encantó me hace acordar hacé años atrás que también hise esos empalme de medía tención en los pórticos del puerto de exolgan en Buenos Aires lleva tiempo paciencia y muchas concentración y atención a lo que se está haciendo ya que es un trabajo de precisión y muy peligroso por las cargas que manejan eso cables y sobre todo con la humedad felicitaciones colega
Love this video most I work with was 440VAC . Be safe out there .
Excellent video!
@albertomunozgomez5570
3 жыл бұрын
mire la miniatura y entre y no pude dejar de mirarlo jajajajajajaja y si es un byuen video
This is really nice work. Too bad no one spends the time to do this. My first boss fired me the first day. He said I did really great work, and that he never needed to worry if my connection would hold. He said he never needed to worry about the inspector finding something wrong with my work But he told me he would be out of business if he kept people like me. I took way to long, because I did all the steps and did it right. He had guys that just used butt connectors from home Depot and some 99 cent electric tape True story
@sujitkumarsingh3200
5 жыл бұрын
Sorry to hear this. It is true that people are greedy.
@michaelbarnhill2685
5 жыл бұрын
What was the application? There is a engineering quote that says, sometimes good enough is best. Granted, I believe those decisions should be left up to the engineer
@user-rn5ip9ec6j
4 жыл бұрын
@@michaelbarnhill2685 yes this aplikation .. Naturlich ha ha ha ha ha ha ha . ho ho ho ho ho ho.
@frankieromnimon5898
4 жыл бұрын
If your boss was a high-voltage lines contractor and fired you for the reasons you mention, he should have his license revoked. I imagine his luck was holding up around the time he fired you and had not killed anyone yet from negligence.
@ocsrc
3 жыл бұрын
@@frankieromnimon5898 at the time I was fired he had not had any fires yet A few years later he had his first, then his second. I moved out of the area and don't know if any more happened I know several buyers had issues with outlets and switches and lights not working and had repairs done.
I wished I would have went to the Johnny Horizon school for doing some gnarly shrink wrap jobs. Awesome job!!
Diese Montage in der Nacht bei strömenden Regen unterm Zelt, da fängt der Spass erst an......
GOOD VIDEO....LEARNT ALOT
@aayushrathod4029
7 жыл бұрын
ENGIYAH VIDEOS
Here hold my beer.... I can solder it together with my mighty Yihua.
That's the right size of cables that i need for my headphones amigo
I love all things electrical with a passion and this here is an artwork of beauty! Well done and congrats.
watch out men, there are two snipers
@MrIzo56
5 жыл бұрын
@Eìon O'hInneirghe You must be really fun at parties bud.
@daverhodes382
4 жыл бұрын
@Eìon O'hInneirghe Tosser.
Imagine completing a splice and realizing you forgot to slide the shrink wrap on beforehand.
@Karanar
7 жыл бұрын
if you are doing it without reading the procedure, then sure :p most people don't like to read procedures, so they usually fuck up.
@Backyardmech1
7 жыл бұрын
Procedures are for newbs when you've been doing this stuff for years. Personally I would like a second person with me doing this double checking every step as we go.
@mdrazi2486
7 жыл бұрын
Md Razi Shaikh
@AtlasReburdened
7 жыл бұрын
"Procedures are for newbs", he said, knowing nothing of science or epistemology.
@AtlasReburdened
7 жыл бұрын
Who, me?
I was a retired electrician too and experienced high voltage cable splicing ,it's very delicate and complicated steps to follow to perform this job .
super amazing after 7 years!
I should to that to my speaker wires. That would make them cat-proof, I hope.
Obviously this will be a lot different when you're doing it on the field. you will want to make sure you have all the correct heat shrinks on before you make the first Connection.
THIS IS ART!
10/10 Nice professional work.
What an amazingly intricate process. I never would have imagined. I wonder how much one of these splice kits costs.
@rearspeaker6364
2 жыл бұрын
1 new Toyota Camary.
@mrfrenzy.
10 ай бұрын
a joining kit for 12kV cables with 3 phases costs about €400. For 24kV cable it's about €1000.
На стенде конечно хорошо, а посадить этого спеца в канаву, где по щиколотку воды со снегом, сверху дождик. Если наращивал, один вопрос, а если ремонт обрыва - где маркировка фаз?
Informative. Useful. Calming. Inspiring. Life-changing. Enjoyable. Heart-warming. Other.
With 4.6m views and 20K likes it's fair to say that nobody was looking for this but everybody needed.
I don't know man... Seems like a Lotta work
Why is the copper screening braid double-layered over half the joint, then open-wound over the remainder? Did they run out of braid half way through the job?
@shrinkpolymersystemsuk
9 жыл бұрын
nlo114 Hi, no nothing ran out. The mesh is to pick up surface current and as long as its in contact with the insulation/conductive tubes, the semi-con layer on the cores and back to earth, that is all that is needed. Has been tested too so we know its fine.
@apdjwivjekdif
9 жыл бұрын
If is done that way for conduct the transceiver calibration support to its optimum performance.
Interesting to see heatshrink used. In London EDF (UK Power) Networks they encased everything in a potted resin.
This will come handy next time I repair a 11kV 3 Core XLPE & EPR High Voltage Cable.
"All traces of carbon must be removed from the insulation" *Blasts yellow flamed burner at the insulation, filling it with soot*
@smith549371
3 жыл бұрын
Why doesn't he use a heat gun?
@mk23909
3 жыл бұрын
@@smith549371 Maybe there is a power failure.
@smith549371
3 жыл бұрын
@@mk23909 you can use gas heat guns also, theres no need for flame. Most people would consider a flame unprofessional or amateur.
@mk23909
3 жыл бұрын
@@smith549371😉
@fraser827
3 жыл бұрын
Open flame torches are most commonly used actually and standard practice in the trade. Much quicker and far easier, but yes U could use a heat gun if U really wanted too
как всегда: хуяк, и забыл одеть последнюю термоусадку :D
@androngorshkov
3 жыл бұрын
классика))
@user-lx9ki6zl4b
2 жыл бұрын
👍👍👍😅😅😅
Nice joint! Last thing I could read on shrink tube of the joint was "THC" before the speaker said the joint is complete. 😂
@bobweiss8682
3 жыл бұрын
Well, it isn't a complete joint without any THC....
Not something I'd want to be doing in a hole in Minnesota in January during a nice sleet storm. Gives me goose bumps just thinking about it.
WAGO do something, please! ;)
@casianreport3318
3 жыл бұрын
LOL
Nice work at starting video but in last I'm confused how can we put two round heat shrink tube in already jointed wires 🤣🤣🤣
@michaelstewart9308
3 жыл бұрын
He put them on at the very beginning
@AnilKumar-lt4uk
3 жыл бұрын
@@michaelstewart9308 check his video at beginning
@AnilKumar-lt4uk
3 жыл бұрын
@@michaelstewart9308 check at 17:43 he slide tube from sides because it open from sides if it is in field it would be a great mistake
참고영상 감사합니다
nice.thank you very much!!! wish me good luck for weekend
I've probably watched this 30 times at least, only because it puts me straight to sleep
@danielgonzalez2582
6 жыл бұрын
ASMR ! (google it)
@shrinkpolymersystemsuk
6 жыл бұрын
Excellent, I am glad we can help you sleep better
This is exactly what I did when I tapped into a WestPenn power line to build my underground meth lab. Unlimited power at my finger tips
amazing process, thank you for sharing this video.
Thanks algorithm, now I know something I'll 1000% never need to know.
Work of art , to think guys are doing this in a hole in the ground in all weather, amazing 👏👏👏
Beeping noise in the background as if this man is performing surgery on a human. Good job Sir!
did someone leave a tap running in the background
OK, this looks easy. No problem. I am now ready to splice high voltage cable.
Must admit that was great to watch
That's perfect for speaker cable. Lol
Изолента не синяя, работать не будет
Nice presentation sir... In real that is not easy as we saw.. Here in KSA we are now using 3X500mm2Al for 15kV. Way bigger. So we need efforts in doing cable joints... Thanks for the additional knowledge☺
@bradyates7320
Жыл бұрын
500mm😳 the biggest I’ve worked with is 300mm on EHV, and that was a work out
I should learn for physics now, but this is so fascinating...
no one: not a single soul: yt algorithm during pandemic: wanna watch this guy join 2 wires?
damn I think i dont even want to know how much 1 meter of this cable costs :P
@Karanar
7 жыл бұрын
depends on the cable, but the cables I have worked on are similar, though different and they are $150/meter
@peerfunk
7 жыл бұрын
Vanklow wow thats not as much as I expected however you need a lot of cable for this task :P
@garymartin6696
4 жыл бұрын
@@Karanar . ..??
الله على هذا الفن الصناعي الراقي
waow so simple..... just a million tools, materials, and work hours. ^^ lol i'm amazed on what you can find on youtuber.
How the fuck this be in my recommend video
@moondarck
7 жыл бұрын
All I did was watch one soldering video, now my recommended page is full of videos like this... Damn that new youtube algorithm
@terangsoco136
7 жыл бұрын
danish
@brianr987
7 жыл бұрын
Terang Soco limeys catching up on how to handle high voltage cables.
@brianr987
7 жыл бұрын
He's dressed up in a cute little suit to perform this exercise. In the US, the electricians would have done this in 2 minutes.
@coldbloodedfasist5536
7 жыл бұрын
go learn english!
Doing his in the field not quite so easy lol
@Karanar
7 жыл бұрын
I did something similar in a shack in Trinidad and Tobago. Dirt floors and no lights :P
Perfect joined termination
I wished I'd have had one of those sheave tools when I was terminating armoured cables, beats a Stanley knife hands down!!
Next up Electro booms does a 11kv splice lol
9:44 "...all carbon traces must be removed from the primary insulation" but once he is done of that he marks it with a yellow grease marker.
@Sparks0001
8 жыл бұрын
+David Hughes And shrinks it with a yellow flame that is probably putting soot (Carbon) all over the place...
@dkohler5226
8 жыл бұрын
+Toby Sinclair-Bell Good call on the yellow flame, the red mastic should not protrude beyond the first shrinks, it needs a wad of red mastic between the three conductors at each end and the gray silicone tape is not for a pressure seal between layers it's for gap filling, so the last lap seal needs to be the red mastic, and how did he run out of the aluminum gauze and not finish the half lap covering? Oops
@hokiepokie333_CicadaMykHyn
5 жыл бұрын
It's already over engineered by the insurance company... Because writing up new SOP's out of blood, tends to cause more issues than doing it right the first time.
i used to do this with cotton tape and linsead oil and lead plumbing joints 30 years ago
قمة الإتقان ، برافووووو،
Next on How It's Made... You mom and dad's vibrator, power supply cable.
i wanna put that on my arm
I'm glad they included part 7756-WQ-4411 electrical cleaning tissues. My kit was missing them. Awaiting shipment from customer service.
Reminds me the cables of the electrical shovels in the mine I used to work, they use 6.6 KV, and they used to repair them in a couple of hours...
@Veritas-invenitur
3 жыл бұрын
Sergio Garofoli Couple of hours isn’t that bad. Must have had an experienced crew.