This pedal is incredible. Thanks for the video

This is amazing!

Would you do this for clean and dirty channels so 2 clones?

Question: Rather than cloning an amp preamp only, would it be recommended to load down the amp, and to take a line out feed post power amp and pre-speakers? Thanks..

HEADRUSH FX, you should have had the Amp Cloning with also to save 3 channels per each CLONE so you can have different preamp gain levels and EQ settings to clone. I'm curious to see how well the cloning will do for fenders Hot Rod amps and Fenders Blue Deville amps because they have a nice tube breaking up sound which will be hard to clone.

@HeadRushFX

Жыл бұрын

You could emulate multiple channels with different rigs/scenes

@waynegram8907

Жыл бұрын

@@HeadRushFX not the SE as cloning different parameters settings on your amplifier and guitar pedals. The cloning right now is only one snapshot sample

Strange! "KÄFTEN" is a Swedish slang word for Munnen, which means "Mouth" in English

Great video thanks for posting! Is there any difference on the method if you use the Headrush core?

@Return2TheLiving

14 күн бұрын

They are identical in this sense

This is incredible! Will the clones be usable in rigs for the standard Headrush PB/mx5 and other modelers?

@HeadRushFX

Жыл бұрын

Clones are exclusive to PRIME

@rod-abreu

Жыл бұрын

​ @HeadRush FX Any chance in this existance to get a editor for windows/mac to write effects on? Or atleast is it possible to get access to the SDK?

@ronaldzik

Жыл бұрын

​@@HeadRushFX any chance that it will come available to others or is this technically not possible? Mooer has the cloning in the ge300, but the profiles/clones can be used in the ge200.

@dangeroso121

2 ай бұрын

@@HeadRushFX Also CORE, correct?

If I export a rig, that uses an amp clone, will the clone be included in the rig or do I have to xpoert/import the clone separately?

@Return2TheLiving

14 күн бұрын

It’s included

When cloning the preamp of a head only, with no cabinet involved, the waring says not to connect the powered speaker output into the mic input of the Headrush. What am I supposed to put in-between the 8ohm jack on the amp head to the mic input on the Headrush? A DI or LOAD box I am assuming? What's the difference?

@jfo3000

Жыл бұрын

To get the signal of the preamp only you'd have to extract signal from the effects send, not the 8ohm out. This is just in general. You need to ask if the effects send can go into PRIME, but it seems that is what they are implying...per your verbiage above. You might want to contact tech support to remove any ambiguity before cooking any electronics.

@danc3746

Жыл бұрын

@@jfo3000 Thanks, the LCD instructions warn you about the powered speaker output, but do not tell you what to do.

I was just thinking about trying something else, I have a gigboard and pedalboard... The effects are great but the amps are lacking

@HeadRushFX

Жыл бұрын

Check out our preset video. It should give you an idea of how the amp models sound. There's a lot of new stuff in there, plus CLONING! kzread.info/dash/bejne/nnuNm9BrZ5m7gqQ.html

what volume level should the amp be to clone? im guessing if you have it on 0 it wont do anything because no tone going through the amp. but probably dont want to be on 10 either. so what is optimal level on the amp when cloning?

@HeadRushFX

Жыл бұрын

The input level going into Prime should be -6dB, but the level of your source (amp) depends on what amp you're using and what kind of tone you want. Cloning captures the exact tonal properties coming out of your amp. Basically, whatever level YOU think your amp sounds good at is the level you should be cloning at. If you have a tube amp that needs to be CRANKED, then crank it!

@metatron333ascension

Жыл бұрын

@@HeadRushFX oh i see. so there is more to it than just hooking up a mic and getting it optimal at -6db. i never knew that. ive never tried to clone an amp before.

@mac63corvette

10 ай бұрын

During cloning my Amp was so loud. How do I avoid this. Volume was only on two.

Does anybody have any bass amps that they've cloned?

will cloud cloned precepts/ amp be available for other headrush products like gigboard or MX5?

@cpeplinski

Жыл бұрын

My first question as well. I am thinking of getting a Prime and I gig in other towns using another guy's pedalboard. I would love to clone my home amp and then have that all on his HR for traveling.

@HeadRushFX

Жыл бұрын

Cloning and using clones is exclusive to Prime.

@benboutin6642

Жыл бұрын

it's really a pity.... I Hope you will not give up your old products...

@metatron333ascension

Жыл бұрын

@@HeadRushFX there isnt going to be a prime version of MX5 or Gigboard??

@HeadRushFX

Жыл бұрын

@@metatron333ascension nothing to announce at this time 😎

What's the best microphone to use for cloning Amp&Cab? Dynamic or Condenser?

@bciecko1

2 ай бұрын

I wish someone would address this. I keep asking all over and am not getting anything. 2 months plus and you get no response. What about placement too, you know. We aren't recording sounds, just responses to the circuit and the response the speaker makes to the frequencies.

@Return2TheLiving

14 күн бұрын

These are all preference based things as they will affect the outcome, same with mic placement and distance.

I really wish the guy took a couple seconds to explain little things like “latching” “polarity” n things like that

Freak, really, another device??? That's why no good improvements have been coming out to the Headrush Pedalboard.

@jazzmathias

Жыл бұрын

Or fix their looperboard that’s even can’t get the syncing right, good job headrush! lmao

@rod-abreu

Жыл бұрын

​@@jazzmathias Yeah, right? I've been (together with many other users) requesting them some sort of control software as well, so that we could make changes in the software and then upload it to the board, or at least if they could open up their SDK so we could create our own stuff... but just nothing. Freaking capitalism.

-6db with guitar volume dimed? No one seems to be clear on this.

@JohnvanCapel

Жыл бұрын

The -6db is a ballpark figure - if you have a very low-output guitar, you'll probably want to dime it, but the average guitar you can just set it to "whatever tends to sound nice to you". The HeadRush sends some test signals through at basically all volumes a guitar can achieve on its own, and it can work around the mic input as long as it's not peaking or bottoming out. The amplifier's volume should also be on however you like it, as long as you set the parameter in the HeadRush to be the same.

@014bhap

5 ай бұрын

-6 is the max imput volume from the amp or pedal. I would have the guitar volume all the way up. Otherwise the input will be too hot. You are looking for -6db Max Headroom. (remember him?)

What?