The headliner whisperer.

Thank you for the excellent demonstration. My headliner is in perfect condition it's just sagging by the windshield. I can do this! 💪🏻

Thank you, directly to the repair and not a bunch of Fluff - Love it! Great Job

I'm so glad I watched this....thank you . Now I can fix my headliner ....

Simple and right to the point, awesome video 👍🏼

Thank you! Awesome video! Feel better about doing mine now

Bruh....that was cool as hell...I can't wait to do mine exactly like you did your's

Thank you for sharing. I’m going to be doing this soon.

very nice. I have the same exact problem in my 01' Marquis, the entire headliner is intact, except for the very back 3 inches or so. I'll be doing the repair, as you've shown, tomorrow. Thanks. Most helpful, indeed.

@twistedgrillz7729

Жыл бұрын

How did it work for you and is it holding up well ? I have an 01 Grand Marquis Ls and it beginning to sag.

This was very satisfying to watch

Good job! Even it is not that super difficult but the work done looks pretty decent.

Awesome video thanks

Great video

Thanks for nice Joby and passion To record.

Excellent job with the quick fix. Final result looked pretty good 👍 well done

@vetmech4554

4 жыл бұрын

Reece's Auto Headlining Repairs thank you! I really appreciate it.

@mirkodifazio6026

3 жыл бұрын

Salve ho il cielo un po’ staccato se uso lo spray a colla dopo nn rimane nessuna macchia? Grazie

Nice!

Wow i like this now i can do mines excellent

Right to the point.

I believe you need to put adhesive to both headliner And roof...wait awhile till tacky..then put together and tuck with putty knife. Permatex. No stain.

Tome mi like buen hombre!

Nice job!! How the tool he is using is called a scrapper

Very good video and good job.

@vetmech4554

8 ай бұрын

Thank you very much!

Thanks!

@vetmech4554

5 жыл бұрын

Neal Blangiardo glad I could help!

👍🏻😍

Thank you sir

@vetmech4554

4 жыл бұрын

Tu Sancho your very welcome. Glad I could help.

I have a tan colored headliner also and some 3M headliner glue, do you think that glue will that show through? Or should I just get the kind you are using? Thanks so much! Great vid!

@vetmech4554

4 жыл бұрын

Jennifer Cullen thanks for the comment! 3M makes a great product and you should be just fine with that glue. If you want to test the color just spray a little of the glue on a scrap piece of cardboard. As long as it’s a lighter color of glue it shouldn’t show through. I hope that helped. Have a great day and good luck!

@cullen406

4 жыл бұрын

@@vetmech4554 I didn't mean the color of the glue, but bleed through of the glue.

You can also spray the adhesive under the gas pedal!!!

@vetmech4554

Жыл бұрын

🤪

What material do you use: backed with polyethylene or with polyuretane? Where do you buy material? How much per linear foot (5 ft width)

Since it's been a couple years I'm curious how well the loctite adhesive held up....any updates on it?

@vetmech4554

2 жыл бұрын

I have since sold the car but it looked the same as that day when I sold it. It seem to hold up well.

Don't you have to remove the foam material first?

@vetmech4554

Жыл бұрын

Not necessary for this type of quick fix. If you’re going to remove the foam because of rotting then I would just replace the entire headliner.

Do this and see what for mess you end up with. Just replace it.

Excellent.number for loctite please

bad idea. the glue is fine. it is the polyurethane foam degrading, that fails. puting glue on the old polyurethane may work for a few days, and then the poyurethane will fail again, because it turns into crumbles of sticky yukky goo.

@vetmech4554

8 ай бұрын

Thanks for your input and I am sure this is the case in some instances, but this is a good fix for most. In fact this car’s headliner is still holding up great with this repair and it’s been a few years.

Don't do this. I have tried it. It will fail within two days.

@vetmech4554

Жыл бұрын

It doesn’t work for every scenario but fixes most that are just starting to sag. If it’s to far gone I completely agree. Try using a different type of adhesive and make sure it’s applied per the manufacturer’s instructions.