Interesting video. Your Giulietta is looking great by the way! I'm a polymer chemist and I think the "polymer" in this kit is likely just acetone (maybe a bit diluted). Acetone can dissolve polycarbonate. The vapor has the same interaction with the polymer but can't actually dissolve any significant amount of it so it just lets it swell or turn glassy to self-level again. Should be a like new finish but, as you suspected, without any kind of protection. It's just bare, smooth polycarbonate. A new UV barrier is essential.

@arcgarage

8 ай бұрын

Thank you very much for clarification, I was doing the research on the liquid, but all I found out was that there are some chemicals from the paint thinner, whether it has acetone, I am not sure. The finish is looking as good as new, and I think that UV protection is going to help a lot...

@ChemCorps

Ай бұрын

Do not need protection.

Very good video comparison of the two methods, and demonstration in general on how to refurb cloudy head lights. I have done this many times on my Giulietta, each time an initial great result only lasts about a year, the main problem being that you have sanded through the factory UV protective layer. Many of the kits have a liquid for you to wipe on as UV protection, and while this works, it is temporary. I guess a little more permanent solution would be to mask up the area and spray paint it with clear coat lacquer.

@arcgarage

8 ай бұрын

I did all of the methods possible in the past, including the clear coat, and they all yellow out eventually, but I think this one is pretty good since I applied the UV protection, but we will see

Super je izašla svaka čast 👌

@arcgarage

8 ай бұрын

Hvala, pozdrav

Thank you for this clear comparison video👍

@arcgarage

Сағат бұрын

Glad it was helpful

Very good video, useful and well explained, as usual😌. Thx!!

@arcgarage

8 ай бұрын

Thank you for support my friend

Very nice comparison. I have been thinking about reconditioning the headlights on my G as well, and this definately helps! Keep it up! Cheers from Denmark 🇩🇰 ♥️🇮🇹🚗

@arcgarage

8 ай бұрын

Glad it was helpful, thanks, will do

Thanks. Good job.

@arcgarage

8 ай бұрын

Thank you

Thanks for video

@arcgarage

8 ай бұрын

Thanks for watching

Good job

@arcgarage

8 ай бұрын

Thanks

Excellent review by far, thank you for helping me make my decision. God bless

@arcgarage

Ай бұрын

Welcome, thanks for watching

The chemical is acetone. Good thing you used protection. I know you masked just a little but you really should apply it liberally because acetone can remove paint also.

great video man, is it possible to provide the links we can supply both products?

@arcgarage

8 ай бұрын

Thanks, of course, I have added all the links into the description

Samo da javim sa sam juce radio ovo na Fiat Bravu. Samo sto sam ja uzeo neki najjeftiniji kit od 10e(najjeftiniji koji sam uspeo da nadjem), i zastitu sonax kao sto si ti preporucio, i ispalo je odlicno. Koliko sam skapirao onaj polimer je nista drugo nego neka vrsta acetona koja topi povrsinu plastike i u pravu si morala bi zastita preko. Samo se razmisljam dal sam trebao da idem do 2500 ili 3000 vodenu smirglu mozda bi bolje ispalo, posto sam ja isao do 2000.

@arcgarage

28 күн бұрын

Pozz, vjerovatno bi, ovi su ispali kao novi

Gdje se može nabaviti taj uređaj? Odličan video, pozdrav iz Osijeka 😎

@arcgarage

3 ай бұрын

Hvala, mozes na netu, ako nema u hr, mozes ovde kod nas u bih, pozdrav

After the “UV protection wears or washes off this is how your lights will always look 3:18 You could have saved yourself from doing all that work & just rubbed some WD-40 or Rainey or even car wax on it & it would look the same as your finished product.

@arcgarage

Ай бұрын

Simply not true, I have been doing this for years, all the stuff you mentioned would revert it to damaged state much quicker. Almost a year has passed and these headlight look still like new. So if I apply UV protection annually, they should be good

@airgliderz

Ай бұрын

Not true at all.

I've heard those vapour kits are basically acetone steam guns - they lightly melt the top surface of the plastic and flatten it out. Not sure how well it holds up after a few more years of UV though.

@arcgarage

8 ай бұрын

That is exactly right, but the liquid is not acetone, it might contain it, but I know it also contains things found in paint thinners. Since it only repairs the surface of polycarbonate, I don't think it protects it from UV at all, that's why I applied that UV protection at the end.

@elioo_z

8 ай бұрын

had mines cleaned with polymer vapor....came out looking brand new...it's been like 4 months or so since i did it and they still look soo good...no issues at all@@arcgarage

@alfa668

8 ай бұрын

​@@arcgarageBRATE PA OVO SU BOSANSKE TABLICE😂🙋🏻

@arcgarage

8 ай бұрын

@@alfa668 Da da

can this method apply on the motorcycle;s windshield?

@arcgarage

11 күн бұрын

I think yes, if it's made from polycarbonate

Da li je polimerizacija trajnija od klasičnog poliranja? Nakon klasičnog poliranja bez uv zaštite farovi požute za manje od godinu dana.

@arcgarage

3 ай бұрын

Jeste, ali je opet potrebno zastititi

Would aplying a sprayable clearcoat also work to protect the headlight?

@arcgarage

9 күн бұрын

Yes, but then you wouldn't even need to use the vapor to restore it, you can clearcoat it after you scrub with with sandpaper

@Kpostma100

9 күн бұрын

@@arcgarage agreed,but the result would not be nearly as neat as when the vapor is us3d

any updated photos on how the polymer headlight has held up?

@arcgarage

12 күн бұрын

Excellent, like the day they were restored

@alxmata

12 күн бұрын

@@arcgarage Thank you!

@arcgarage

12 күн бұрын

@@alxmata No problem, it really is a great method, just make sure to protect them from uv

Clear coat but 2K like the one used to paint the car. Or ppf transparent foil i think is ok.

@arcgarage

2 ай бұрын

Both great options, but UV protection does the same job

Po pedantnosti, domišljatosti rešenja, ideja za video, stvarno si na mnogo višem nivou nego što brojke pokazuju, mislim da si dostigao već taj nivo da snimaš bilo šta ljudi bi gledali… Kad bi birao best buy motor i menjač, je l’ ipak C635 i 1.4TB kao kod tebe, bez MA jedinice ili QV (sem problema sa turbom, po forumima je izuzetno pouzdan motor)?

@arcgarage

8 ай бұрын

Hvala ti na podrsci, znaci puno. Da sam mogao uzeo bi QV, ali za moje potrebe realno i ovaj motor je super. Gledao sam da bude bez MA bas zbog pouzdanosti. u sustini oba su veoma dobra samo da su odrzavana kako treba

Kako se drzi posle 3 meseci?

@arcgarage

4 ай бұрын

Isto, bez promjene