thank you for this video, couldn't find any other videos showing how to take the air vent pieces from the old face plate, and move them to the new one. Very helpful video liked and subscribed

@mikestupak1809

9 жыл бұрын

Hey how do you take that face plate out?

I never had to drop my column to pull that panel out

@harrisonwims1916

5 жыл бұрын

Donnie Dahlia same

@AnthonyJ350

4 жыл бұрын

Thanks for the feedback!

@brandoncallahan9289

3 жыл бұрын

Yeah I've always just put the truck in gear and it slid right out XD

Thanks for posting this, you explain the process very well.

@AnthonyJ350

7 жыл бұрын

Vladimir Molitvenik Glad it helped

i just bought a 1994 gmc truck. thanks for video now i know how wire all the cables

@AnthonyJ350

2 жыл бұрын

Thanks for watching!

Thank you SO MUCH for a clear and detailed video. Yours is the only video I’ve seen that actually explains what to do with the connections from the original radio

@AnthonyJ350

3 жыл бұрын

Glad you found the video helpful 🙂

Thank you for an excellent how to, showed me what I needed to do , great

@AnthonyJ350

4 жыл бұрын

Glad it helped you!

Alright, got another question. So I'm running an Alpine single din in where the cassette player is, but I want the factory head unit still there. I want the factory unit to still have 12v and accessory power, so I can see the clock when i turn the truck on. How can I mod the wiring harness to get to the Alpine, but still have accessory power and ground going to the factory head unit?

What two harnesses do you wire together? It's the adaptor and what other wires?

dang, the only part i needed to know was the part u didnt record. taken out that center piece to put ur equalizer

@eliasmd2003able

5 жыл бұрын

Exactly.

@stephenschowalter4464

4 жыл бұрын

Same wtf

@AnthonyJ350

Жыл бұрын

Thanks for the feedback

Were you looking into a standard head unit or double DIN screen?

could you recomend any good ones? i was looking at this pioneer DEH-80PRS and i use play music for the moment, planing on switching my songs to power amp. would i be able to play music through the usb sonnection? or would it only work through the head phone jack? would it make a difference in sound quality?

There's 7mm fasteners holding it in. Use a flash light so you can see them better.

Hello As part where it goes the new radius?

do you know any good after market steros hat work good with andriod? i need one for my new polk speakers. my buget dosnt really matter for the stero it can be over 200, i just need one that will work with my galaxy s3 andriod phone.

I was able to tilt the steering wheel down and drop gear shift to drive and had plenty of room without unbolting the column. Now as far as undoing the old unit damn that was frustrating just really tight space and the piece under the dash that the tape deck and control head plugs into needed unbolting to remove completely. I reused the factory wires to hook the new unit up which worked fine but they were short and hard to get to .I didn't have any adapters or anything to plug into them so I had to splice every one .in the end after a few bashed fingers and little cussing walla ,the new unit fit and sounds great..

@AnthonyJ350

4 жыл бұрын

Thanks for sharing!

When buying the radio and parts, go to Crutchfield. You get the box, wires, antenna adapter, and the center unit for free if you spend $119 on a radio. Then free three day shipping. It saves money, and allows you to spend more on a radio, vs. a cheaper one, then buying everything else.

How do you remove the support braket i dont know how to access the bottom two 7mils at the bottom please responde asap

My radio works now... thank you.

@AnthonyJ350

Жыл бұрын

Awesome! Glad the video helped!

Thank you so much !

@AnthonyJ350

4 ай бұрын

You're welcome!

standard, most head units say they come working with an ipod or iphone through the usb. i just need one that will put out verybood sound and i can use my galaxy s3 with it. and it all works good, i dont really car about pandora or so much blue tooth.

A lot of decks like the JVC Arsenal can use Bluetooth audio streaming to play music and you can control everything from your phone , (great for partying) and most decks have the auxiliary hook up as well.

Thanks!

On the original wiring harness there is a white wire that plugs into a green wire, what is the function of this wire and does it need connected to the new aftermarket harness? Thank you!

@AnthonyJ350

3 жыл бұрын

Sorry I don't have the colour coding memorized. You'll have to test the wire with a multi-meter.

is there anyway to get a new radio, but hook it up so i can use the old tuner or whatever thats above the climate controls? i hate the open box thats added and dont like the idea of bending down to adjust the radio. ive tried googling but that has got me no where

@AnthonyJ350

10 жыл бұрын

I guess you could get a marine controller used to be mounted in the back of a boat which would control the deck to take up the old space. It's not really that much further over though. I'd save the $150 accessory and just reach over the 6 inches.

What wire harness are you using ?! I need to buy on how are you just plug and playing.

@AnthonyJ350

8 ай бұрын

Metra harness

Hello I was wondering where the cage comes from and how you installed the cage into the mounting kit at 4:31 cause I honestly don’t understand how to do it.

@AnthonyJ350

2 жыл бұрын

Hi there, I explain it in detail in this video kzread.info/dash/bejne/o2uhl82lj7rfiJM.html

Do you still have the stock radio if so I would be interested in buying it I am looking for a working unit for my k 1500 ?

@AnthonyJ350

6 жыл бұрын

Ronnie Lowther No sorry I don't have it anymore.

After finishing the wiring with the Metra harness on my 1993 Silverado, I plugged in the antenna and connected the harness to my pioneer H/U I have power but no sound. My only thought is that I didn't connect the remote wire, however, I didn't think the truck had an integrated amp?! Any suggestions? Is the remote wire essential in a 1993 Silverado? Thanks!

@AnthonyJ350

10 жыл бұрын

You might have a speaker shorting out causing the head unit to go into protection.

@JustinSmith-hr6qg

10 жыл бұрын

Thanks Anthony, I am at the point now where I will be pulling the front speakers for just that reason. I tried to make both front speakers "pop" with a 9V battery (individually of course) but I got nothing. Two blown speakers is kind of rare? So blown that they do not respond to stimulation. IDK

i have a 1990 silverado all i have is a pocket not a cassette deck can i still install a aftermarket radio?

@AnthonyJ350

Жыл бұрын

Yes you should be able to

Completely did it himself in his 2 car garage in Brighton Co.

@AnthonyJ350

4 жыл бұрын

Really cool

I did all that but my stereo won't turn on I hooked it up to another car to see if it was just broken but it worked fine.

@AnthonyJ350

4 жыл бұрын

Sounds like you have a blown fuse in your vehicle.

Can you make a video on how to remove the ad vents to the stereo kit

@AnthonyJ350

Жыл бұрын

Next time we work on one. They're pretty rare now.

Does the cage come with your aftermarket radio? Or do you need to order that

@AnthonyJ350

4 жыл бұрын

Cage is typically supplied with the aftermarket head unit.

We’re did you get the Special wiring harness or what is the name?

@AnthonyJ350

Жыл бұрын

It's a Metra Electronics part. Your local install shop will carry it.

I know this is an old video . But I have ordered two different kits for my 1990 Silverado single cab and when I go to install the new dash bezel it doesn't give clearance to the bottom of the stereo housing

@AnthonyJ350

5 жыл бұрын

There is a metal bracket that runs underneath, did you remove it?

@chevychris3227

5 жыл бұрын

AnthonyJ350 thanks for the response . I got another dash kit and it fit not sure what was up

Very obsessed with that squre hole😁😂😂

@AnthonyJ350

5 жыл бұрын

Who it's obsessed with holes? Doesn't matter the shape.

Is it possible to wire an aluminum wire thing that connects to the radio to My radio harness cuz it's copper so is that possible or what do I need to do in this situation??

@AnthonyJ350

Жыл бұрын

Aren't you using an aftermarket harness?

@imachickinosaur697

Жыл бұрын

@@AnthonyJ350 Yes my aftermarket harness is copper and the one that came with the radio is aluminum so idk what to do there

@AnthonyJ350

Жыл бұрын

@@imachickinosaur697 You can crimp the connections instead kzread.info/dash/bejne/fpd3rsybgLaTnZc.html

Ok so I got my head unit installed where the cassette was, but I left the original radio above the climate controls because I still want it to be functional. Is there any way I could hardwire the factory stereo in so when I turn the key it'll still illuminate and show the clock?

@AnthonyJ350

7 жыл бұрын

I'm sure you could. You just need the factory wiring schematic.

@LegalZephyr

7 жыл бұрын

So do you think I could just splice in to the aftermarket harness? Would that fuck up my new aftermarket deck?

@AnthonyJ350

7 жыл бұрын

The Zephyr Productions I honestly just put a pocket in. But if you want to be creative you just need power accessory and ground. Just install a small fuse to be safe on the power lines. If it's a low draw I tend to install diodes inline to avoid any back feeding of power.

@LegalZephyr

7 жыл бұрын

But do you think it would work if I just spliced it in to the aftermarket harness. I'm new to the whole wiring deal and don't know what to do to make this work.

Where should I go, the intiror of my truck is red is there anywhere you would recommend to go to, to look and see if they have red den covers.

@levihelser1005

5 жыл бұрын

I got mine on amazon for like $28 the whole kit in any factory color you choose

@AnthonyJ350

Жыл бұрын

Interior repair shops. A lot of them are typically mobile because they do dealership/ shop work.

Idk what happened but when I pulled my aftermarket radio out of my 94 so I can’t put new retainer clips in the ac vent I did something to the radio. For some reason when I was pushing it back in the radio lost power and my dome light and footwell lights flash dim when the door is shut. When I open the door it stops. So I had to unplug the radio. When I plug it in the lights flash and no power to the radio. I’m at a loss.

@AnthonyJ350

2 жыл бұрын

Did you use an aftermarket wiring harness to plug into the factory wiring?

@irishuwould5185

2 жыл бұрын

@@AnthonyJ350 I just recently bought the truck so idk what was used. After I posted the comment I checked the fuses and the “ctsy” (courtesy) 20 amp fuse was blown. Since the wires weren’t wrapped in electrical tape and just left to be after being cut, I assume one touched another or metal somewhere. I wrapped all the loose wiring and replaced the fuse so I’m good now. I’m not an expert in all that so it kind of perplexed me but I thought let me check the fuses.

I have a 94 gmc and that pocket is something I would like to do, where can I buy it?

@AnthonyJ350

4 жыл бұрын

You local install bay shop will be able to order it for you.

How do I get the head unit out? You skipped that part. I took the dash panel off and unbolted it but it's still wired in somewhere

@AnthonyJ350

3 жыл бұрын

If you look up towards the middle of the dash you'll see the main stereo in the dash. You can unplug it from there.

how did you get the attena to work my stock attena don't fit into the slot on the aftermarket radio

@AnthonyJ350

8 жыл бұрын

Same vehicle? You need an antenna adapter from your local install shop.

@BurgerBin

8 жыл бұрын

not sure which one to get tho. an there's many,choices

@AnthonyJ350

8 жыл бұрын

+Lakota Staffen Go on Metraonline.com or bestkits.com and you can look up your vehicle.

Hey I have a 89 C1500 is it the same wiring as yours

@AnthonyJ350

7 жыл бұрын

Joshua avila Should be

I see them but i dont know how to reach them is what i was trying to say

how do you get the head unit to secure to installation deck

@AnthonyJ350

4 жыл бұрын

Just installed it into the sleeve that slides into the mounting kit.

What kind of analog dash gauge do you have?

@AnthonyJ350

8 жыл бұрын

+ThaPrime Mini Not my truck so I don't remember the details of it, sorry.

is a soldering iron better to work with than a soldering gun i have a weller &im thinking that maybe an iron would be easier to work with ,oh by the way i like the way you work your very well organized &love to watch you work as i like electronics but don't know much about it .. have a good 1

@AnthonyJ350

7 жыл бұрын

nick diaz Thanks! Ya I find a proper iron to work better in most situations. It has more of a setup time but it works well when working in the underdash of a car or on the bench.

@MrTarkus007

7 жыл бұрын

it looks like your a canadian so am i lol

@AnthonyJ350

7 жыл бұрын

nick diaz You're 100% correct!

@MrTarkus007

7 жыл бұрын

i don't wanna bust yer chops but where from in canada (curious) im from montreal

@AnthonyJ350

7 жыл бұрын

nick diaz I'm in Vancouver BC.

Hello Anthony..Amazing video..Quality work..Could these wire harness fit on a 94 chevy pickup 1500 truck..Iwant to find this special wiring harness..I wonder if you could help me find this harness..What should I go to ....

@AnthonyJ350

Жыл бұрын

Yes it would. You can order the wire harness from your local install shop.

@kr1ck3t81g

Жыл бұрын

@@AnthonyJ350 would the Metra 70-1855 harness bypass fit so that icould order online..just to make sure..I would like to buy the one with the long wires

@AnthonyJ350

Жыл бұрын

@@kr1ck3t81g Yes, it should say tuner bypass in the description.

@kr1ck3t81g

Жыл бұрын

@@AnthonyJ350 kool..Thanks Anthony for the help and recommendation ..Bless you in every way

@AnthonyJ350

Жыл бұрын

@@kr1ck3t81g Happy to help 🙂

Very good video helps out a lot but I'm having trouble finding the stock wiring harness. Where did you get that special harness that goes from up there to down there?

@AnthonyJ350

7 жыл бұрын

Jr. Styles You can get the harness from your local install shop.

The radio part under the dashboard it has the wiring hookup on the silver plate . Just wanted to let you all know this.

@AnthonyJ350

2 жыл бұрын

Thanks for sharing!

What do I do if the deck works but there's no sound out of the speakers. Installed 4 new speakers check the radio each time before put the trim back together. All worked until i plugged the 4th on in. Any help would be appreciated. Thanks!

@AnthonyJ350

3 жыл бұрын

Sounds like a speaker is grounding out causing the head unit to go into protection

@marmoose30

3 жыл бұрын

@@AnthonyJ350 wow thanks for the fast reply. Just watch a KZread where came to that conclusion. Is there an easy way to check?

@marmoose30

3 жыл бұрын

Even when I unplugged that 4th speaker the deck still wouldn't work

@AnthonyJ350

3 жыл бұрын

@@marmoose30 I use a Power Probe 4 on all the speaker wires, and when I see one of the speaker wires go to ground that's it. You can also use a multimeter. Also if you turn on the stereo if you hear a small pop, that particular speaker is going to ground.

@AnthonyJ350

3 жыл бұрын

@@marmoose30 What kind of vehicle? There might be a factory amp you have to turn on.

Is it possible to replace the original head unit with a touch screen (double or 1.5din???) I don't like the whole pocket thing...

@AnthonyJ350

8 жыл бұрын

+Legal Zephyr In this particular vehicle?

@LegalZephyr

8 жыл бұрын

Yes.

@LegalZephyr

8 жыл бұрын

In replacement of the head unit, not cassette player.

@AnthonyJ350

8 жыл бұрын

Legal Zephyr You could, but it would be custom at that point.

@LegalZephyr

8 жыл бұрын

what do you mean by custom? Like a custom sized radio or I would have to modify the bezel area to accommodate the size of the head unit.

Where did you get your wiring from

@AnthonyJ350

4 жыл бұрын

I run a shop and we get it from our distributors. You local install shop will be able to sell these items to you.

hello Anthony speak spanish?.

I just used long extensions for my wrench.

You do not need to drop steering wheel drop gear shift in first and it will come right out

@crackerjack8115

4 жыл бұрын

Right

@AnthonyJ350

4 жыл бұрын

Thanks for the tip

@devshewitt4809

4 жыл бұрын

You got to pull out radio which you got to pull out head unit and follow wires down by your drive foot is factory plugs

@devshewitt4809

4 жыл бұрын

Did it come with the proper wire kit you have to remove radio unit out of truck completely it’s under sash right above gas pedal to the right a bit a silver box remove of truck and the two plugs you take from them go to your new radio but has to come with two plug adapter

which harness did you buy from the site?

@AnthonyJ350

8 жыл бұрын

+Steven Moore It's in the description.

@max54881

8 жыл бұрын

+AnthonyJ350 theres multiple different harnesses. i was meaning like which specific one, i didnt wanna buy the wrong one and then be screwed.

@AnthonyJ350

8 жыл бұрын

Steven Moore If your vehicle is exactly the same as the one shown in the video, you'll need to order the "amp bypass" version. Which is a longer version of the 70-1858. Why not just purchase it from your local install shop?

@max54881

8 жыл бұрын

+AnthonyJ350 Theres not any near by and my trucks not in the spot to drive atm haha i was just wanting to buy the correct one i can finish my system.

@AnthonyJ350

8 жыл бұрын

Steven Moore You want Metra's 70-1855 for the harness.

Hooked up like this and my stereo still resets every time the ignition gets turned on and off again….. don’t know what I did wrong

@AnthonyJ350

2 жыл бұрын

You "battery" wire isn't keeping voltage with everything off. Need to use a multi-meter and test.

@cooltjlong

2 жыл бұрын

@@AnthonyJ350 exactly witch wires are what couldn’t really see them

@AnthonyJ350

2 жыл бұрын

@@cooltjlong This video I explain it in detail kzread.info/dash/bejne/lKmMtK-ehaazmZM.html

I bought a new head unit today and got it all wired up and everything but it wouldn't turn on? Is there something I missed?

@AnthonyJ350

10 жыл бұрын

Did your old head unit turn on? What kind of vehicle?

@dallasbrandon2734

10 жыл бұрын

Yes it did and a 93 chevy blazer k1500/c1500

@AnthonyJ350

10 жыл бұрын

Dallas Brandon Check your red yellow and black wire with a multimeter to make sure the deck is getting power. How did you make your connections at your harness?

@dallasbrandon2734

10 жыл бұрын

idk what that is and what you mean I have connecters putting them together. Sorry I'm 17 and just got new stuff today

@AnthonyJ350

10 жыл бұрын

Dallas Brandon If the old deck still turns on fine after you've plugged it in, check all the connections you made with the harness. You might have a bad crimp connection (I'm assuming you did the install with butt connectors).

Heml yeah, a tach was my first thought I've had the 92 94 and now just got a 93 k1500 blazer...some have tachs...wome dont my Silverado sport 94 did and it's a real crapshoot...this 93 Silverado didnt...I ront wanna over rev and monitor the engine and tank you for using lead solder...oh and I've been inhaling lead solder fumes for years it wont hurt you, I build printed circuit boards...and I'm just fine lol

@AnthonyJ350

Жыл бұрын

Thanks for the comment!

Actually if you move the shifter back instead of shifting down you can get it out, I do it all the time, just lower your steering wheel and pull your softer back( but not down )

@AnthonyJ350

6 жыл бұрын

Thanks for the tip!

I like real estate on my dash lmao

Where did you ground it

@AnthonyJ350

3 жыл бұрын

Factory ground in the harness.

@niklasacuna4193

3 жыл бұрын

@@AnthonyJ350 thank you. I bought a 88 and the radio went out I found a extra ground running to the radio

@AnthonyJ350

3 жыл бұрын

@@niklasacuna4193 you can use the ground if the connections are good and it's secured well the chassis

Why didn't you use flux with your solder I've read that was the correct way to do it?

@AtrumNoxProductions

10 жыл бұрын

Some solders will have a flux core. That might be what he is using?

@AnthonyJ350

4 жыл бұрын

There's already flux in our solder.

you dont have to drop the column to get the bezel out

@AnthonyJ350

3 жыл бұрын

People do things different ways.

Why not keep the stock AM/FM radio and just change out the tape deck for the CD headunit?

@AnthonyJ350

10 жыл бұрын

On these trucks the AM/FM control unit stops operating after you unplug the main harness. So I put the pocket in instead of having buttons that do nothing. You could leave the radio controls there too if you want, they just won't be operational.

@Thinker669

10 жыл бұрын

If I had one of these, I'll keep that stock radio for the stock OEM look.

Oh ok ket me try again then

You should probably check that it works before putting on all the trim...

@AnthonyJ350

10 жыл бұрын

TheGreggy711 Where's your sense of adventure? It is very possible I checked it before I even filmed that scene.

@Joseph-C

10 жыл бұрын

AnthonyJ350 Sure, but you said to check to make sure it works after you said to finalize the installation. It's obvious you knew exactly what you were doing, simply by observing the speed at which you assembled the harness piece. I was just pointing out that for educational purposes, it would be optimal to tell a first-timer that they should turn the unit on before screwing it in and reassembling the trim in case they did something incorrectly prior to the finalization of the install. If someone hadn't thought to do that otherwise, it could save a lot of frustration and potentially even a new car modder, as I would imagine this is a pretty common first "mod" for some people.

hello, I'm writing to ya because my trucks(1990 chevy c1500) stereo units are missing, the three of them. as much as I know there was three owners before me. The first one I believe was a younger guy. Well I believe he is the one who got rid of the stereo units and messed with the wiring. I'm writing to ya because I bought the harness that goes to the top of the original head unit. and it's has more wires than I believe the original did. The new one has 13 wires(rear left and right speakers, front left and right speakers, ground wire, illumination/dimmer wire, power antenna, ignition/switched, and battery/constant), but the wires that I've found that I believe belong to the original harness has 9 wires (front left speaker wires and front right speaker wires, battery constant, accessory switch, ground wire, illumination wire, and stereo dimmer wire). One question I'm asking, is that do I have to by a specific stereo unit for that harness, or something else? The other question I'm asking is, am I soposed to use the other two original wire harnesses that went to the boddom side of the original head unit? because I dont believe I have those anymore. Don't know all what the dude took out of the original stereo wires. To also tell you what wires I have connected right now are battery constant to battery constant, ground to ground, and illumination to illumination/dimmer. What I do not have hooked up right now for the old wires are the accessory switch, and dimmer wire. From the new one is ignition/switched. From those three wires I mention, which of the two old wires go to the new wire? I'm not very smart when it comes to wires, but I love to learn new things. So some help would be very most appriciated!!!

@AnthonyJ350

8 жыл бұрын

+need4speedaholic If you have an after market harness did you test the red wire to make sure it's accessory? If it tests fine then hook it up.

@need4speedaholic

8 жыл бұрын

+AnthonyJ350 Well the thing is, is that I haven't been able to find a red wire with the original wires. there are only these colors from the original wires. Gray and tan, dark green and green, orange, yellow, black, gray, and brown. those are the only colored original wires. I cant find a red wire. The orange was battery constant and the yellow was accessory switch. The new harness is the only one with the red wire.

@AnthonyJ350

8 жыл бұрын

Need for Speed Those are the GM colour code wires. You need to purchase the after market harness that plugs in. Or has it been cut?

@need4speedaholic

8 жыл бұрын

+AnthonyJ350 I couldn't find any harness that involved the stereo. so I bought a harness that looked exactly like the harness that would have been connected to the original harness. it has four slots in one harness, if that helps any on what I'm talking about lol.

@need4speedaholic

8 жыл бұрын

+need4speedaholic but also yes all the original harnesses was cut or removed. so I bought a harness that looked exactly like the one that would connect to top of the original stereo head unit.

That painting of the orange two toned impala... I know the guy that built that.

@AnthonyJ350

4 жыл бұрын

That's awesome!

@cjkimball139

4 жыл бұрын

Very! Talk about memory lane! The taillights on it were completely flush with the body and almost like a mirror. Then the stripe down the side is true 24k gold. STILL one of the most amazing vehicles I ever had the seen, and the fact I saw it BEFORE the interior was complete being put together in his garage is astonishing. Would probably 💩 myself if I saw that beaut again😍

@AnthonyJ350

4 жыл бұрын

@@cjkimball139 It's so cool to hear stories like that. The demand for craftsmanship isn't the same. People people are content building a vehicle with slapped on widebody flares and vinyl stickers.

@cjkimball139

4 жыл бұрын

Being a younger guy all of my friends have been caught up in the “wide body, bags, n wrap” some kits have their flair but nothing like true CUSTOM craftsmanship

@AnthonyJ350

4 жыл бұрын

@@cjkimball139 They don't like it because it's difficult to achieve and requires a lot of experience and investment in tools. I noticed that's one of the reasons some of my videos aren't as popular as similar topics that do it with less quality.

Can you say OCD?

@AnthonyJ350

4 жыл бұрын

That's why people want us to do work on their vehicles :)

Sorry no, not really.

unplug battery next time dude,rookie mistake

@AnthonyJ350

7 жыл бұрын

Demarcus Williams We rarely disconnect the battery when removing head units. We just make sure to not cycle the ignition if anything is unplugged.

@stephenschowalter4464

4 жыл бұрын

Was thinking the same thing

@AnthonyJ350

4 жыл бұрын

@@stephenschowalter4464 How do you test and verify wires with a multi-meter or appropriate test tool if the battery is unplugged?

You spent less than a minute showing how to remove the old radio components, which is 90% of what makes this vehicle more challenging than most, then 10 minutes showing how to strip and solder wires, which I don't need to see at all. At most show soldering one or two wires. The stuff behind the dash is what we need to see here.

@AnthonyJ350

3 жыл бұрын

Thanks for the feedback!

why so many people like single din. for me it looks 90s or 80s. i like more modern stereos double din is best bluetooth car play android and smart connections like tire tpms backup camera

@AnthonyJ350

2 жыл бұрын

Some people want something more Era correct. Or the dash doesn't accommodate a Double DIN and they don't want a floating screen. Could also be a budget thing. Lots of reasons.

At 5:34 you twist wires with your bare fingers. What does that do to clean bare copper people? = corrosion. At 7:11, those are shit strippers people. Can't wait till THE SOLDERING BEGINS LOL. No shot of the actual solder joint. I can tell though all Anthony is doing is melting solder over cold copper wire. See how the large smoke plume instantly emerges? That tells me Anthony holds the iron on TOP of the joint. She forgot back in the third grade that heat RISES. Iron needs to be below the joint. Anthony Anthony...........

@AnthonyJ350

7 жыл бұрын

Not really sure how you can tell since I didn't zoom in while soldering but ok. This is how I solder. You do know I work in a shop and have to provide a lifetime warrenty on work. If this method was so poor I'd have car come back at the 3 year mark. How many deck installs do you do a week again? kzread.info/dash/bejne/dKx1taiuYZzIfLg.html

@AnthonyJ350

7 жыл бұрын

jim davidson When you do wiring do you wear gloves at all times?

Gotta love how to videos without the how to portion. ….okay now that the radio is pulled…..

@AnthonyJ350

5 ай бұрын

Yup, we're showing basics of connections. The Metra mounting kit has the vehicle specific disassembly instructions. It's amazing how much people complain after receiving free info. You can pay me $50/hr and I'll video call you and guide you step by step if you'd like.

@ponyup90

5 ай бұрын

no big deal bro. other videos out there. probably why your channel is not at the same level as others...@@AnthonyJ350

Straight waste of time

@AnthonyJ350

9 ай бұрын

Because you can't figure it out? Pay a professional please.