Hatsan AT44 .177 vs BT65 .22 grouping, muzzle velocity and energy comparison: kzread.info/dash/bejne/X6l1tLSfqc2XcaQ.html

Buenas tengo un BT65rb W 5.5 Lleno a 200 bares tiro dos cargadores y se baja a 100 bares. Es normal ?? Veo que otros tiran 4 cargadores. Me ayudas ?

Hola, tengo un BT65 en 6,35 mm. ¿Dónde puedo conseguir plumas como esta? ¿Cuántos julios tiene el arma después? gracias dieter

What do I do if the barrel comes off. In the cylinders stays on the gun because that’s what just happened to me and mine was hollow inside and I have Screwing and screwed it back on several times trying to figure out why it’s not holding air and this time it’s stuck to the gun and didn’t unscrew and I can’t get it to unscrew does this mean I need to return it? I can’t get hats and answer the phone or call me back this is the worst customer service I’ve ever experienced. I bought two guns from them in the last week and they still don’t respond.

Ωραιο βίντεο. Σήμερα παρέλαβα το αεροβολο καινούριο και μου χανει αερα απο εκείνο το σημείο

@beastmode2990

Жыл бұрын

Φίλε σε τι διάμετρο το πήρες; Με ενδιαφέρει ένα 5.5 να μου πεις αν είναι καλό. Απλά σφίξε το με ένα Άλεν δεν είναι κάτι πόλους έχω ακούσει να το λένε αλλά η hatsan γενικά τα στέλνει χωρίς αέρα

Are you aware if the procedure is simililar in the AT-PA 44? Thank u in advance for any reply .

Was looking for a video on how to dial it back actually, but this is great too, haha. Anyone know of an aftermarket valve regulator to dial it back or up or even keep it regulated for all the shots? Mine looses it's capacity over an amount of shots I've taken. Thanks in foward!

Gostaria de compra uma válvula reguladora do zeca para r8 pode me passar o telefo ?

Hi i have poland Hatsan invader so it is 17j limit do you know how to make it original power mod? and parts?

Buenos videos tengo un BT65rb W 5.5 Le puedo montar el regulador ?? En otros vídeos veo que perforan el tubo del aire para que el hueco coincida con el del regulador ?? Y se estabilicen las atmósfera. El tanque mío se construyó en 2012. Y para montar el regulador debe ser del 2018 el año ??

boa noite meu amigo,eu tenho uma bt65 elite e ela tem um regulador igual a este ,ele vei com 130 bar como faco pára aumenta ou diminuir a pressao.obrigado .

@unrelatedactivities

6 жыл бұрын

O ajuste é no parafuso de plástico na ponta do regulador. Eu nunca ajustei este regulador, mas deve ser semelhante ao Lane: sentido horário diminui a pressão, anti-horário aumenta. Não encontrei informação sobre a relação entre o número de voltas e a variação na pressão, se for ajustar, tente antes conseguir informações com o vendedor ou fabricante para não correr o risco de danificar o regulador e perder a garantia.

En dotant la Hatsan bt 65 d'un régulateur, es qu'on gagne en autonomie, ? Je parle du nombre de coups qu'on pourra tirer alors

Oi amigo! Tem algum risco em carregar a Bt65 com nitrogênio? Parabéns pelos videos!!

@unrelatedactivities

4 жыл бұрын

Obrigado. Acredito que não, já que o ar é quase 80% nitrogênio provavelmente não faria diferença. Acho que complicaria um pouco em relação ao fornecimento e o equipamento para carga. Em todo caso, uso somente ar comprimido e não recomendo nada além.

@saidbatache4255

2 жыл бұрын

Je n'arrive pas à avoir la traduction en français, merci quand même, je suis algérien et c'est la seule langue étrangère que je maîtrise un peu, désolé

Jaką ma teraz moc ?

Qualche link dove acquistare il kit?? grazie

Olá amigo, sabes como resolver problema na lateral esquerda da Hatsan. Onde trabalha o sistema de rodar o magazine?..desmontei meu e deu merd!..saltou peças e agora não arranjo ninguém para resolver. Obrigado.

@unrelatedactivities

5 жыл бұрын

acho que nunca abri esta parte. Tente ver no diagrama dela: www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=9&cad=rja&uact=8&ved=2ahUKEwikv_WK4bHhAhVGK7kGHRnxACQQFjAIegQIABAC&url=https%3A%2F%2Fhatsanairgunsusa.com%2Fwp-content%2Fuploads%2F2018%2F12%2FBT65-SB_Exploded_View-June2013.pdf&usg=AOvVaw0cKX2Bzj9YnzqqUjY4OvjO

you can install big air chamber with regulator and shoot heavy pellets

@unrelatedactivities

6 жыл бұрын

It is only to do the test, the medium weight pellets serve well for my range (50yd maximum, indoor).

@whatsyurprob158

4 жыл бұрын

Where would I get a bigger one for my Carnivore .357?

Bueno vídeo, cómo hago para aumentar la potencia del BT 65 sb W en calibre 22. Gracias

@unrelatedactivities

3 жыл бұрын

Gracias. Mira este video, son iguales en mecánica: kzread.info/dash/bejne/nJeMpK6rYqvanJs.html

Ué ! não estendi bem pq você esta fazendo isso, mas estou muito curioso pra descobrir ... aguardando os próximos vídeos !

@unrelatedactivities

6 жыл бұрын

É para atirar o JSB Jumbo Beast 2,20 g com mais velocidade e ver se melhora o agrupamento. Podia ter aumentado a pressão no regulador, mas não quis tocar no ajuste dele para não correr o risco de não conseguir voltar ao ajuste atual, que está ótimo para os chumbos de peso médio.

good work man :)

@unrelatedactivities

6 жыл бұрын

Thanks!!!

Can you replace the barrel on this model with larger 9mil barrell?

@unrelatedactivities

2 жыл бұрын

No.

Do you need to unpressurize the air tank before removal ?

@unrelatedactivities

2 жыл бұрын

As shown on the video. first remove the air cylinder, then use the air bleeder to depressurize it completely.

@chrisalarcon7013

Жыл бұрын

Can you just shoot until empty? Thanks .

Is there any way to remove it without the screw?

@unrelatedactivities

4 жыл бұрын

Yes, it can be pushed from the other side (but the input valve has to be unscrewed also).

@stewiebadboy

4 жыл бұрын

Thank you

does it have a pressure regulator? if I understand correctly it serves to have about the same power despite the pressure in the bottle? so if we remove this regulator there is max power but the power drops after each shot in the same way that a pistol co2 12grs?!

@unrelatedactivities

5 жыл бұрын

It does not come originally with a regulator, but there are a number of regulators that can be installed inside its air cylinder (Lane, Huma, Altaros and hatsan came to mind now). Yes, the regulator keeps pressure constant inside its chamber, as far as the pressure in the cylinder is above the one the regulator was set to. This way, the muzzle velocity is more consistent and can reach better accuracy. Regarding the behavior of the airgun without regulator, it depends on various factors, but can be as you have described if the hammer has enough force to deliver maximum power when the air in cylinder is at the maximum pressure. If the hammer is adjusted for lower power, the muzzle velocity starts below maximum in the first shots, then increases to maximum and finally decreases. This video shows some graphs that illustrate this: kzread.info/dash/bejne/k3adltR-ncnTnpc.html Hope it helps.

@nicorallysport

5 жыл бұрын

@@unrelatedactivities OK thanks a lot !. for you is it better to have a regulator? that does not bridle the power?

Would this damage the rifle

@unrelatedactivities

3 жыл бұрын

No, originally there is no regulator in the BT65, so it just returns to the original setting.

Φίλε μπορείς να με βοηθήσεις με αυτό το αεροβολο; έχω ένα πρόβλημα και δεν ξερω τι φταίει

@asoasotriadio

Жыл бұрын

Καλησπέρα φίλε τι θέμα έχεις ίσως μπορέσω να βοηθήσω... Σκοπεύω να το πάρω και εγώ... Από Ελλάδα το πήρες;

@user-cl4ov9su1k

Жыл бұрын

@@asoasotriadio ναι από βραχνό !! Το βρήκα φίλε μονος μου το πρόβλημα ... δεν είχε ευστοχία καθολου χτιπουσε ακανόνιστα το είχα στείλει στον τεχνικό κ δεν βρήκε τι είχε ούτε αυτός .. τελικά εφτεγε ο σιγαστήρας μόλις τον έβγαλα χτιπουσε κανονικά .. είχε φαγωθεί ο σιγαστήρας εσωτερικά και επηρέαζε τιβ βολή ... μετα διάβασα πως οι κ κάθε σιγαστήρας χαλάει μετα από κάποιος χιλιάδες βολές κ εγώ τον έιχα περιπου 5 χρόνια

@asoasotriadio

Жыл бұрын

@@user-cl4ov9su1k Κατάλαβα, να σου πω από θόρυβο πως πάει κάνει φασαρία πολύ; Και ο σιγαστήρας (υποθέτω είχες της Hatsan;) πόσο πολύ μειώνει τον ήχο; Δηλαδή αν θέλω να ρίχνω που και πού δοκιμαστικές βολές μέσα στο σπίτι με σιγαστήρα θα μπορούσα η θα ακούγομαι σε όλη την πολυκατοικία... Είμαι ανάμεσα σε αυτό και το Hatsan invader

@user-cl4ov9su1k

Жыл бұрын

@@asoasotriadio εγώ πηρα έναν air arms οχι hatsan ! Κάνει πολύ δούλεια σκεψου πως αν κατσρις δίπλα στιν κάνη θα σπάσει το τιμπανο ενώ με σιγαστήρα σε πάει περιπου στο 1-10 δηλ είναι σχεδόν αθοριβο φίλε .. κοίτα για το δεύτερο αεροβολο δεν μπορώ να σου πω γιατί δεν έχω γνώμη ! Όμως για το συγκεκριμένο μπορώ να σου πω πως σακατεβει και είναι και απιστευτα ευθιβολο πχ ένα κουτάκι αναψυκτικού στα 100μ το έχεις για πλακα και γενικά εος κ τα 300 μέτρα με ριθμιση διοπτρας κ σλαγκ βληματακια χτιπας !! Εγώ το έχω παρει 6.35 μπορώ επίσης να σου πω πως με μια απλή φουσκοτιρα των 30€ το γεμίζεις σχετικά εύκολα κ κάνεις περιπου 40 βολές με δύναμη !!! Με μικρότερο διαμέτρημα κάνεις αρκετά παραπάνω !! Δεν έχω παράπονο κ το έχω περιπου 5 χρόνια ... ότι άλο θες να με ρωτάς

@asoasotriadio

Жыл бұрын

@@user-cl4ov9su1k Και εγώ αν πάρω θα πάρω το 6.35 είναι φοβερό πολύ δυνατό και το καλό είναι ότι αν θελεις αυξάνεις και την δύναμη λογικά θα το ξέρεις, γυρνάς την βίδα του hammer spring και το φτάνεις μέχρι και 100+ Joule... Απλά σκέφτομαι και το Invader λόγω του semi auto... Έγινε φίλε καλή συνέχεια

👍🇦🇿

@unrelatedactivities

3 жыл бұрын

Thanks!

En dotant la Hatsan bt 65 d'un régulateur, es qu'on gagne en autonomie, ? Je parle du nombre de coups qu'on pourra tirer alors

What do I do if the barrel comes off. In the cylinders stays on the gun because that’s what just happened to me and mine was hollow inside and I have and screwed it back on several times trying to figure out why it’s not holding air and this time it’s stuck to the gun and didn’t unscrew and I can’t get it to unscrew does this mean I need to return it? I can’t get hats and answer the phone or call me back this is the worst customer service I’ve ever experienced. I bought two guns from them in the last week and they still don’t respond.

@unrelatedactivities

3 жыл бұрын

If a new product is falling apart one week after purchase, the vendor must replaced it.