Custom Orders Shop woodseasonstore.com/

@alanowens3816

8 ай бұрын

I plan to order later thank you

Truth be told when I first saw epoxy resin creations i thought the people who made them were these master glass workers until I realized you used this compound that imitates the weight and feel of glass. I have to hand it to all epoxy artists that your stuff is really cool!

As a Harley rider myself with that exact bike this is not just a craft piece but a work of art. Very nicely done.

OMG I love that. Now I know what this weekend is bringing.

Very nice job. As someone who encapsulates many things in resins, I have a few suggestions that may help you in the future: 1) If you use 1mm plexiglass attached to you outer form as the inside against the epoxy/resin, instead of the packing tape, you will have almost no sanding required for the shiny surface because there would be no seams like those left by the tape. 2) If you vacuum the epoxy before you pour rather than after, you can get a pristine outer surface with no inclusions. Also, In this case, you might want to pour with the top surface being the outer surface. That way, you would only need to prep the top surface after you remove the mold if you used the plexiglass to create the smooth sides. 3) If you want to make sure there are no visible bubbles in the pour, you might want to consider a pressure pot to put the freshly poured item to cure in. You only need a pressure of around 60psi (4.2bar) to hide any remaining microbubbles. You can make them fairly inexpensively from a 2.5 gallon paint pot like those found at harbor freight or vevor.

@WoodSeason

8 ай бұрын

Thanks for your recommendations

@Beachnative42

8 ай бұрын

#2 by not doing how it was done in the video any air inside is trapped and can escape, especially with slow cast resins regardless if you put it in a pressure pot or not. A presure pot only makes the air bubbles smaller since air compresses. I know I've done resin tables for over 35 years and small casting can be a real PITA. I have done full vacuum infusion with a piece of oak that came out weighing like a boat anchor. What I do have to commend the creator of this vidoe is of the surface polishing technique. The most tricky surface to polish is the one s where it is side lit. It will show every darn micro scrach and this looks perfect!!! I know I have tried to polish 80 feet of side lit polycabonate that some kids scratched when vandalishing a lit wall protecting a display in a museum, I have tried everything from vapor polishing to using a torch like in some videos to the basic compound, polish, glaze techniques used on gelcoat. Side lit ot lit from the bottom is incredibly difficult since the light refractions of a scratch show at all angles. Take a bow, what you did was incredible with the polishing alone!!!!!!!!!!!!

This Harley is so cool. You did amazing with this.

@RonAnderson-zs1kf

8 ай бұрын

I know we had a Harley and we rode to ACA in PUA

Turns out great. Love it!

@WoodSeason

Жыл бұрын

Thank you so much

Absolutely well done.

Excelente trabajo y te quedo muy bonito. Te felicito 👏👏👏😉

what excellent work, beautiful outcome 👍

Maravilloso y muy habilidoso trabajo!!!!👏👏👏💖💖💖🇦🇷🇦🇷🇦🇷

@WoodSeason

8 ай бұрын

Gracias

Wow talk about talent skill and hard work the results are astonishing absolutely amazing 👍

Лайк за красоту и кропотливый труд. Спасибо.

@WoodSeason

Жыл бұрын

Thanks

Muito Bonito! Parabéns.

Como ficou lindo! Que trabalho de excelência. Parabéns, e com um Rock 🎸? Dedicação total.

Great work, I have a 2013 midnight pearl Harley Davidson street glide 😊

Bonjour, vraiment très beau.bravo pour votre travail 👌💪🏻🙏🇺🇸🇫🇷

Hermoso trabajo felicitaciones

❤❤ I LOVE THIS ❤❤ IT'S SO AWESOME AND OUTSTANDING!! YOU DID AN EXCELLENT JOB 👏 👏👏👏

Nice job. Looks great !!!!!

Sick! I might do that with mini Kona the bus 😂

amazing use of your equipment-

Te quedó de lujo felicitaciones 💯👍👏👏👏🏍️ 🇦🇷

@WoodSeason

8 ай бұрын

Muchas gracias

Excelent idea!! Congrats!!

Now that’s very cool

Es de lo mejor de todo lo que he visto hasta ahora

absolutly stunning sir

Very very cool job my regards Abdullah From the State of Kuwait

@WoodSeason

11 ай бұрын

Thank you so much

Brilliant that looks well cool

That is awesome, want one with the nightrod lol

Lots of work looks great...

Good job! Very good perfomance! I really liked the Harley projector. let's have another video but without the sound of the instrument!🎉😊

Pour un petit joué un boulot monstre quand même résultat superbe

Excellent work

Itt looks great and I love it

@WoodSeason

8 ай бұрын

Thanks

I really like your idea, the lamp is amazing🥰

Fantastic job

Looks very cool ! I just came across your channel in my feed actually and I'm happy to support your efforts and those of other fellow moto content creators. I look forward to seeing and hearing more from you in the future, keep up the great work and ride safe out there.

@WoodSeason

11 ай бұрын

Thank you so much

@FreedomRider1982

11 ай бұрын

@@WoodSeason youtube.com/@WoodSeason 👍

Very cool looks amazing

@WoodSeason

8 ай бұрын

Thank you so much

Very well done ,it's superb work..

@WoodSeason

8 ай бұрын

Thanks

Great job !!

Very Cool Project....

That is sick! God's creative children at work. Good job.

spectacular

Супер, какая скурпулезная работа))))👍👌

This is so cool! 😀

ESTE TIPO SI ES UN GENIO BUEN TRABAJO FELISIDADES

Superbe travail !!!

Brilliance just Brilliance 🎉🎉

sick, awesome job....

Amazing Bro you are a born artist

@WoodSeason

8 ай бұрын

Thanks

Brilliant

Unreal!

Awesome job mate.

@WoodSeason

8 ай бұрын

Thank you so much

woww. Very good job.

Hammer geil...👍

Very Good job 👍👍👍

Very nice 👍

Muy bueno te quedo

Wow good job to you 💯

This is such a cool project! the lighting was cool enough but to put in an LED projector on the top is over the top! While Maisto makes good replicas they do have their flaws. I am a Scale Model builder and myself, I would have built the model to extremely High Standards, with a Tamiya Model kit, in a larger scale as well, put in LEDs in the headlight, signal and Taillights with inductive coils attached to them inside of the body of the Bike, and built a stand similar to yours, since it is Damn Cool, with a remote charging coil inside of it so when you turned on the charging coil, all of the lights in the Bike would have turned on. without a single wire in sight, because the only wires would have been inside of the hollow form of the model itself. LEDs are getting smaller by the month so small in fact that they are getting hard to see properly. So fitting LEDs inside of tiny spaces is no longer an issue. and with tiny finger drills you can hollow out almost anything to make room for some tiny wires. Yes Sir. a Scale model kit like that would put anything Maisto makes to shame. But unless you have such a built kit right next to this one, you're not going to notice anything amiss, and this display is an awesome piece of art! Well done sir! You did an excellent job! I'm sure there are many people out there who would love to own this piece!!!

👏🏽👍🏽Cool nice👌🏽I like.. ❤Harley Davidson 🤘🏽

@WoodSeason

8 ай бұрын

Thanks

Amazing

Amazing job,🙏🌹

@WoodSeason

8 ай бұрын

Thanks

So cute ,class apart💯

@WoodSeason

11 ай бұрын

Thank you so much

Very good 🙂

RESPECT!!

Nice very good

Awesome. Cheers

@WoodSeason

24 күн бұрын

Thank you so much

تسلم ايدك. الله ينور عليك

GENIAL!!! 👌👍

excellent

Super ❤❤❤❤

Muito legal belo trabalho

Nice 👍

Perfect...

Hi from Australia Just discovered your channel and have subscribed. Love your work and videos! The Harley is awesome and I will be making a chessboard this year and will post video. Regards One Handed Maker

@WoodSeason

Жыл бұрын

Hi. Nice to meet you. I subscribed to you. You have great woodwork.

@onehandedmaker

Жыл бұрын

@@WoodSeason ❤️

Very good nice 🎉

@WoodSeason

8 ай бұрын

Thanks

Fantastuic!

Nice..

Mega 🤩🤩

Now thats impressive, job well done.👍👍👍👍👍🍻

@WoodSeason

11 ай бұрын

Thank you so much

Nice

nice job yeah What is it for a smal beam for the logo ?

いろんな工具があるんですね。

not because of the led :) but I like these channel that u really get inspired from, congrats guy hope u get the 2nd million subs that u deserve!

I would have reduced the labour by 75% and not worry about the over arching HD projector etc. The bottom lighting through the cast would be enough...for me. The model would also be more visible from various angles. Always nice to see process...thanks for offering you're time.

@DaleDix

24 күн бұрын

Yeah, but ya didn't. Lot of coulda shoulda woulda's in this world.

I want one and that's my bike in the block of coolness

❤❤❤❤ Wow!!! I'll buy it,don't know if it's for sale on your page...

Great idea, looks cool. 22:35 ~ Are those swirls in the epoxy or scratches?

@caseyandteresadolph1905

Ай бұрын

It looks like fingerprints and the light just exaggerates them

A very nice job. A friend rides a bike exactly like this. And that would be a really good Christmas present. Would you accept such an assignment? I would be interested to know what the price would be for this?

SUPER

Спасибо классный мотоцикл, зделайте пожалуйста про трансформеров. ❤❤❤🏍🏍🏍👍👍👍👍

Хорошо было бы если фонари на мотоцикле светились, так отличная работа

I thought the better tyres on the driving wheels either back or front wheel drive ?

There are haters everywhere. Haven't seen theirs yet

Where did you get the HD light for the ceiling.

Great job how about LED inside the epoxy box....sticking out to wire off, well maybe easy task or maybe not....

Wow

Muy buen trabajo , una sugerencia , usas menzerna para pulir , usa solo una mínima gota , es suficiente , con lo q usaste allí pules el cofre completo de un auto jajaja saludos