I just finished a TC Bros hardtail and I gotta say I wish this kit was out when I started the project. That brake mount is trick.

Thanks for this informative video. Even old-timers (like me) learn something new from you guys. Build right. Ride safe. -- W

You guys are setting new standards and coming out with some really cool items.

well i think I will try your hardtail and oil tank for the next hardtail sporty I build. Great job guys.

Good info on the oil tank tab welding .

Great tips 👍🏻

sick stuff guys! make a kit for my 07 883 please ;)

Great kit! Would the brake bracket work for tc bros hardtail?

Make one for big twin 4 speed frames.

How much clearance do you have between the rear cylinder head and the frame? It seems that there isn't enough clearance to remove the valve cover with the motor still bolted into the frame.

@PrismSupply

2 жыл бұрын

It's the same amount of clearance as the stock frame, so we'd follow the recommended steps in the manual.

@DiogenesOG

2 жыл бұрын

@@PrismSupply I ask because the clearance is strictly a matter of the position of rear engine mounting plate which is determined by the manufacturer and is not dependent on anything the owner does. So far various examples of two other weld on options that I've personally inspected lack the amount of clearance needed, they generally have about 2mm clearance whereas the stock frame has approx 3/8" (10mm). If you can show that the valve cover can still be removed or at the very least show the measured clearance, then I can recommend your weld-on hardtail with a clear conscience.

wish u made asian noises