This was EXACTLY the info I've been looking for. Thanks!

I'm planning on making the same mod on my 2018 forty eight, with a black tinted tail light and replacing the 3in1 turn signals with also a dark tinted version, this is very helpful bro thanks for uploading this video !!

Thanks for uploading the video... its a big help... the one I'm installing has has turn signal features and now I know what direction to go

Dude thank you so much! I was breaking my head over this!

Thanks it helped wire up a transmitter for my VATA7 backpack.

Thanks for the information partner

You've just saved me lot of time, bro. Thanks

Did it just like you it works no problem, thanks for the video 🙏

Thanks for the help, just an fyi there is no nuetral just ground for DC thanks again!

That might be the answer for my struggle. I'm connecting 4 wire tail lights into my 2008 sportster and I'm having issue with stop light and signal, everything i use turn signal in losing stop light (I've connected white to black, black to blue, red and yellow to purple) now I'll try to pull 4th wire from the harness...

sweet ride bro!

@beardedbatman9174

3 жыл бұрын

Thanks man!

Dude thank you so much!

Good video

Thanks for the video. I'm trying to do something similar but make the rear fender brake light to be the only brake light. With your setup, does the turn signals also light up when you brake?

@beardedbatman9174

2 жыл бұрын

Yes, and they are also a constant running light as well.

Did you use stock cables and wiring for those apes and how high ?

$5.00 test light will figure it out in 2mins. The pointy end of the light is there for a reason

Great video! I just got a 2011 sportster 1200 now it only has the two turn signals on the back my question is stock form do those also function as brake lights? I know they are running lights also I’m trying diagnose if I have a brake light switch issue or if I got the bike without a brake light all together

@beardedbatman9174

2 жыл бұрын

The stock tail lights should have constant running lights, get brighter when the brake is engaged, and flash for turn signals/hazards. If not I would first check your bulbs and fuses.

@spookyzooki1985

2 жыл бұрын

@@beardedbatman9174 yeah I figured it out. It was the front brake switch got wore down but I fixed it thanks!

Hi look so easy but I try to my breakout harley I connect the yellow wire to the blue with red stripe like you said in the video but mine didn't work I touch the yellow wire to the ground and light when on ! What do you think is the problem please help thanks

@beardedbatman9174

3 жыл бұрын

I had to test each connection with my volt meter to determine what connections did what. I'm guessing HD changed up their color codes with the new models perhaps?

I have destroyed 2 of these b cause when you pass a bump the tire hits the light

I installed mine but now it is scraping off on my tire when I hit bumbs. Any tips on how to stop that?

Hey man awesome write up, I also have a ‘13 48 but my right/left signal module only has three wires (black purple blue) with no fourth slot. Where do you recommend I splice by brake light too?

@beardedbatman9174

2 жыл бұрын

Hard to say, they probably change wire colors to mess with us. I would take a volt meter to see which wires do what. The wiring diagrams I found for mine didn't match my colors so I had to do this also.

Do you have the brand name for the light? Have a 2020 iron 1200 and wanted to put a fender light on mine

Would this fit a Honda rebel perhaps?

What is the extra plug for on the wire harness? The one with the long tab?

@kbones35

Жыл бұрын

It is for a licence plate lights

Hwy man if you read this, what size of connector did you use or what size is the wire. 16-18 awg?

@beardedbatman9174

2 жыл бұрын

Yeah I think it would be 16. To make sure nothing came loose I soldered the connections.

How about grilling holes and some round bolts to hold the tail light?

@beardedbatman9174

2 жыл бұрын

Over 1 year in and the gorilla double sided tape is holding up perfect!