I've owned a Breakout since they come out back in 2013 and your videos have been a great help in maintaining my Harley. Just wanted to say Thank You for putting these videos out.

Hey Dude - thanks for doing this vid. This is my first Harley and my first spring needing to do basic maintenance. The dealer only wanted $500(ish) to do the 3 fluids. Not only that, the owners manual makes no mention on that smaller oil plug. So thanx again...

Why my dreams are always expensive :) Amazing Bike ,the most beautifull bike in the world!!! This oil change will be verry helpfull for me one day.Thank you .

Drain plug engine oil. In the maintenance manual this step is not mentioned. Please advise if possible. Much appreciated!

This beats finding the Klymer manual. Thanks for the video

Well Done ! Du machst nen guten Job !

God I hate the oil mess when you take the filter off. I cut up a plastic milk jug and make an oil catch. They also have them on Amazon real cheap. Nice bike.

Great video. Where did you buy the rear fender and seat?

Never tighten a filter with the wrench. Always hand tighten till you can't move it anymore. I work on motorcycles out of my garage and when someone tightens it up with the wrench they are a mother to get off. Trust me on this!

@finneyman

3 жыл бұрын

Truth. Hand tighten filter will be fine

@1mantisco

Жыл бұрын

This goes for any oil filter

@southsidehitmen

11 ай бұрын

@sgrider08 do you know if the Second step (ENGINE OIL drain) is 💯 Necessary???? Why did he do it in this video????

Thanks for the video 👍

blessed be he or she whom teaches the way of the engine!! top drawer!!

Ive been looking for looking for under the handle bar mirrors for my Breakout. What brand are those? Very nice bike!!

Great video ! Nice job ! Such an awsome bike!! Your channel inspired me to buy a breakout ... thank you

@Amtrak___

5 жыл бұрын

Rocko 81 same

Nice man! I do all my own services as well simply because I enjoy it. Only thing I would suggest is take the filter off while draining the sump you’ll get a bit of oil in the lines come out while the filter is off Ride safe

@twiceisneverenough

3 жыл бұрын

Good tip for a cleaner change. 👍

Nice video, what was the torque measured on the second Allen bolt underneath the cam case. I sent mine at 17 foot pounds

Sencillamente genial 👍

I love it really

Toll 👍🏻

Can you make a pricelist Video of your Harley?

You for got to check if there's enough oil on your dip stick at the end of the filling the tank and motor and after the test ride to make sure no leaks and the laval are on the mark of the dip stick

Hi what made you use Castrol oil over Motul or HD synth3?

Hello petite question quel est le deuxième bouchon que tu dévisse pour la vidange moteur j'aimerais faire ma vidange aussi?

Nice and easy bro

Dude what kinda tire is that one I love the rounded corners instead of flat I hate my flat one

What a Beathifull bike

What size Allen head is that 3/8 ? To do transmission and motor drain plug ??

hello in the manual it says to fill with 2.84L in the engine ... why you need 3.3?

Please explain why you drain oil in 2 places, in manuel only 1. Cool bike, like it a lot.

@jansgaard7515

4 жыл бұрын

@@HarleyDavidsonBreakout thank you for answer 👍😀

...perfekt!👍

so how do I change the oil?

Entspricht bis auf die Felgen (ich stehe auf Akront Speichenfelgen) zu 100% meinem Geschmack. Ein sehr geiles Motorrad 😍😍😍

So the Breakout has 2 different drain plugs for the motor oil? The first at the back and the second under the motor? I am right?

@southsidehitmen

11 ай бұрын

No o e else shows this in their videos…..I wonder if it’s Necessary to do BOTH?!???!!?

@mke7876

3 ай бұрын

Technically the second one is not to be opened

Merci, trop cool !!! Tu mets quoi sur le 2° bouchon purge du Téflon?

@julienguillerm2753

Жыл бұрын

Bonjour c'est quoi le deuxième bouchon sur la vidéo ?

i heard you have alarm system , what kind you have ?

What year is this bike?

Bonsoir qu'elle est la quantité exacte d'huile pour le remplissage avec le filtre à huile ? Super cette vidéo ,merci 😊👍

E uma moto linda. Edvandro do Brasil

Mantaf

What wheels are those.

El contenido es muy bueno, me entretienen tus vídeos....

Sorry but it can't be 3.3 litres oil or 3.5 quarts... It takes more litres than quarts. 1 Qt is 0.946 litre. Should also place a rag or paper towel under the oil filter to prevent oil from dripping all over the engine bloc. Still fun to watch. Love the breakout. Same system as my old softail deluxe.

Nice job, on a beautiful bike, just dit the same. But on my bike, there is only 2.8 liter Oil ? 103 engine

Красавец.

How much did you pay for ur rims and what size are they?? Bad as bike though

thank you for the nice video, btw, what helmet is this? can i get a link or something? thanks.

@sandhyanair8190

4 жыл бұрын

@@HarleyDavidsonBreakout hello ...is that a twin cam ?

Castrol hmmm gibt es damit keine Probleme?

I noticed a thread coming off of your oil plug when you removed it. Hope you replaced it with a new plug and o-ring.

@twiceisneverenough

3 жыл бұрын

Saw that too, but noticed he's using thread tape. Could have been a strip of tape, but good idea to check it to make sure there's no issue with a thread line. Good catch man! 👍

hallo, ich liebe dein video, mach weiter so. Ich habe eine kleine Frage, ich suche verzweifelt nach der Marke und dem Modell Ihres Helmes ...... Können Sie mir das bitte mitteilen? Ich wäre sehr dankbar

Me encanta tu moto...

Engine 1690 - 103?

I would go Amsoil for oil no doubt.. The best

Beautiful bike. What center console is that? I’d love to do the same with mine

@flashgordon6238

4 жыл бұрын

The owner says it is from an older Softtail.

@flashgordon6238

4 жыл бұрын

@gemini232003 Just quoting the owner. I have a Fatboy Softail

@flashgordon6238

4 жыл бұрын

@gemini232003 Thanks G. It's my third Harley since 1978 - I'll never stop riding :). I think you are correct about the Night Train as he installed a gas tank from a Night Train in another video, so it stands to reason that he also used the center dash from the same donor tank. Cheers, Flash

@4:25 why are you draining the ENGINE OIL also? By draining OIL TANK & ENGINE OIL, you only need to add Oil to the port on where you check your oil????

Bonita moto friend. Pero que mal aceite le pone :( Nice harley. But, bad oil :(

👍👍👏👏

And always, always torque your oil plug. 14 ft. Lbs. you strip it out, what you gonna do?

What model year is this bike? Less elevator music and more info would be nice. First Breakout model year 2013 is the answer.

👌👍👍

Amogo cuanto vale una moto de esas

Servus! Ich habe bei meiner Breakout auch das Öl gewechselt und im Handbuch waren nur 3qts (ca 2.85l) inkl. Filter angegeben. Ich habe auch den 103cui Motor. 🤔

@seppel3850

Жыл бұрын

@@HarleyDavidsonBreakout Ja, das wundert mich auch. Ich habe auch unterschiedliche Angaben gefunden (3.3l, 2.9l und 3.0l). Im digitalen Handbuch von H.D. zur Breakout stand es mit 3qt (vorläufige Füllmenge) und nach dem Warmlaufen ggf. auffüllen bis zur entsprechenden Markierung. Ich hatte blöderweise zuerst die 3.3l eingefüllt und beim Kontrollieren des Peilstabes ging es bis FULL/HOT (im Kaltzustand) - also wieder 400ml abgepumpt :D Hauptsache am Ende passt alles. Ich mache es übrigens auch so wie du - also das Bike auch mal auf die andere Seite kippen, um mehr Altöl herauszubekommen. Danke auf jeden Fall für die Videos für die Inspektionen. Die sind sehr hilfreich 👍

Your bike model no

Saludos desde la ciudad de México

I am confused as to why you showed draining transmission oil and not refilling it when your done with the oil?

@j4d3n80

2 жыл бұрын

He didn't show removal of transmission oil.

Make sure you ride the bike first then change the oil. Bike must be at operating temp.

Cool video! This is the kinda stuff that I like! Save big time too considering the rip-off most shops charge you for a €7 filter, €20 in oil and 30 minutes labor!!! 20-50 is the best oil for our air cooled bikes! Don't need anything fancy either... its not like a performance bike so super cool 👍 And I also noticed you use the same pig-tail for charging as I do. What a coincidence! Honestly, I would loose the teflon... I've never needed it. Sure, many claim it's added seal against leaks but believe me, the o-ring is more than enough. Taking the filer off is always the shits!!! I explain a cool method in my channel using kitchen alu-foil. BTW: I intended to ask you some time ago. Do local authorities give you a hard time over there with the exhaust sound level? I hear CH is the worst place to be for dB control! Thumbs up from Biker's Garage 101!

Obviously didn't change oil at operating temperature thus thus leg against the exhaust and cold drain bolt in fingers. .. fail

🤘👍😉

I love that intro engine sound. I'm repairing, rebuilding and customising a '92 sportster. Check my page out for some crappy vids haha.

sexy

Sexy Harley ! (Nazar boncuğu nerde ?)

масло меняют на горячий мотор, знай это!!!

@user-kd2wr8ut3v

5 жыл бұрын

@@HarleyDavidsonBreakout меня лайкни я что зря подписан

kool vid keep making them may you ride that hog forever

Man, that's some nasty looking stuff coming out. A rusty goo color. Not my choice of music tunes. Very nice bike.

@craigpennington1251

4 жыл бұрын

You are welcome.

Castrol? One of the worst quality oils... I wouldn't put it in anything, not in such an engine...

CW Marsh how come you didn’t purge the rest of the old oil out of the engine , because just gravity draining is not going to get all the old oil out of the engine with out purging the system? Your way is only getting two thirds of the dirty oil out , you left a lot of the crappy old oil in your engine without purging it , unless I missed something in your video . Just saying .

@valentinomartellas4673

2 ай бұрын

cosa intendi per spurgare?