Really good video Joe. I like the idea of the "bump-out" glued to the first board verses nailing it to the home first. There should be a gap or two to allow any unexpected water out. Making the trim corners before installing is also a great idea to hide any imperfections of the corner of the house. The only thing I do differently is I trim the width of one of the trim boards by the thickness of the trim boards so that the trim is equal on both sides of the corner. But I've seen/done it both ways and it looks it good either way. Great work. And thanks for taking the time to document.

@MrKistel

6 жыл бұрын

Thanks for the kind comment and tips. Regarding the corner trim boards, I just do not like cutting cementitious siding and so ripping a piece did not appeal to me for this project. Thanks again.

@suryaananta7039

4 жыл бұрын

Q11qq11qqq1qqq11qqqqqqqqqqqqqqqq1qqqqqqqqqq1qqq1qqqqqqq1qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq1qqqqqqqqqqqqqqqqqq1qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq2q1q1qq1q111qqq11qqq11qq111q1q111q1q111111

@8894larry

3 жыл бұрын

@@suryaananta7039 Get a Life!

@ezrajoel870

2 жыл бұрын

You all prolly dont care at all but does someone know a tool to log back into an instagram account..? I somehow forgot my login password. I appreciate any assistance you can give me.

@tomasnoel4631

2 жыл бұрын

@Ezra Joel instablaster :)

This is one of the better videos that I have seen. You didn't just assume people knew what they were doing, you explained what you were doing. Good job.

@MrKistel

2 жыл бұрын

Thank you for the supportive comment. Happy new year.

I’m just going to throw it out there... 115 dislikes with no comments 🤔... For us non DIY / no construction background kind of person , I find this video very educational and straight forward... there are tons of postings to choose from on KZread channel to complete the pie in what ever projects you undertake.... I commend you for taking the time out and sharing your skills/ talent.👏👏👏😎🌺🌈🤙🏽

@MrKistel

3 жыл бұрын

Thank you for the kind and encouraging comment. It is rewarding to hear the siding installation demonstration was insightful and hopefully even useful for you.

About to do a house in Hardieplank for the first time and found your technique and tips to be more thought-out than even the James Hardie instructions. Thank you.

@MrKistel

5 жыл бұрын

Thank you for the kind comment. Happy Holidays!

Dang that turned out GREAT!!!! I love seeing quality work and the results speak for themselves. Awesome job.

@MrKistel

4 жыл бұрын

Curt thank you for the kind words. The converted porch has become one of the most functional rooms in the house.

This is a great video. FINALLY some one shows how to put a bump strip when the bottom is concrete. This answers my question! Thumbs up and great work my dude!

@MrKistel

4 жыл бұрын

glad you enjoyed the cementitious siding install video. Thank You!

Really a great job, simple instructions and not long and drawn out

@MrKistel

5 жыл бұрын

thanks for watching and the friendly comment

Beautiful finish and a great way to isolate the exterior walls from the weather and elements.

@MrKistel

3 ай бұрын

Thank you very much!

Really great presentation and verbal communication skills....thank you.

@MrKistel

4 жыл бұрын

Thanks for the supportive comment on this Hardieplank siding installation video.

Outstanding! Simple and clear instructions. Im ready to plank my Tuff Shed!

@MrKistel

5 жыл бұрын

Awesome, thanks. Let me know how the shed project turns out.

this video really helped me in renovating my house, I plan to make the front wall of the house like that

@MrKistel

5 жыл бұрын

Great to hear the siding install video was helpful for you in your house renovation projects and planning. Best of luck with your projects and let me know how the front wall turns out.

Good job with the work, and video. I liked how you pre-built the corner trim.

@MrKistel

5 жыл бұрын

Thanks for the supportive comment

Excellent series concise​ and simple. I hate people who think they need to be overly verbose to instruct. You did it just right.

@MrKistel

6 жыл бұрын

Thanks for watching and the supportive comment. Happy Independence Day.

I used HardiePlank to replace a few masonite boards on my home, they make a HardiePlank design that is very similar to my existing masonite siding. It was quite easy to work with.

@MrKistel

4 жыл бұрын

HardiePlank was great for this application

Excellent presentation. God is in the details...and you covered them thoroughly.

@MrKistel

5 жыл бұрын

Thanks for watching and the supportive comment.

Nice job and a great video. Thanks.

@MrKistel

6 жыл бұрын

Thanks for watching and the enthusiastic comment!

Beautiful job and very picky person to work like me as contractor business owner.. Thank you so much I really enjoyed..

@MrKistel

3 жыл бұрын

Thank you for watching and commenting

Straight to the point, great vid!

@MrKistel

5 жыл бұрын

Thanks Carlo!

Very nicely done! Good job!

@MrKistel

4 жыл бұрын

Thanks for watching and comment on the "Installing Fiber Cement Siding" video

Your work is top notch

@MrKistel

4 жыл бұрын

Wow Zack, thanks! Best of luck with any of your DIY project builds.

Great work

@MrKistel

4 ай бұрын

Thank you so much 😀

Joe, thanks well done looks very good.

@MrKistel

3 жыл бұрын

Thanks 👍

Very good video Joe !

@MrKistel

5 жыл бұрын

thanks John

Awesome work

@MrKistel

5 жыл бұрын

Thanks for the supportive comment

Thanks for sharing your talent sir ❤

@MrKistel

6 ай бұрын

Thank you for the supportive comment.

Well done mate!

@MrKistel

2 жыл бұрын

thanks

Very nice job

@MrKistel

4 жыл бұрын

Thanks Robert the siding has been holding up well since the HardiePlank installation on this home addition.

NICE WORK BRO! GOOD TEACHING AS WELL!

@MrKistel

6 жыл бұрын

Thanks for the comment Derek!

Amazing job

@MrKistel

6 жыл бұрын

awesome, thanks

Nice job man, wow and that editing had to take some time.

@MrKistel

4 жыл бұрын

Wow thanks for noticing the effort that goes into the video production side of making these how-to videos. Often times it takes more effort to make the video then it does to perform the repair or build being featured.

Good job !! Very useful information Thank you

@MrKistel

4 жыл бұрын

Glad it was helpful!

Outstanding job 👍 👏 👏 👏

@MrKistel

6 жыл бұрын

Thanks for the supportive comment James.

Very interesting video....Your experience give me motivation to do the same. Thanks share with us.

@MrKistel

2 жыл бұрын

thank you and best of luck with your DIY build project.

Nice job!!!!

@MrKistel

Жыл бұрын

Thank you! Cheers!

Great job!

@MrKistel

4 жыл бұрын

Thanks!

Great video!

@MrKistel

4 жыл бұрын

Awesome, hope it was insightful incase you have any house siding install projects in the works.

Great job 👍

@MrKistel

4 жыл бұрын

Thanks Greg, The siding on the new room addition still looks great.

@gregrichard9192

4 жыл бұрын

@@MrKistel looks good I've learned some things

Short and sweet, great video thanks

@MrKistel

6 жыл бұрын

awesome comment, thanks

Very well made video

@MrKistel

3 жыл бұрын

Thanks for the supportive comment on this siding installation video.

Good stuff

@MrKistel

2 жыл бұрын

Appreciate it

Good siding job

@MrKistel

5 жыл бұрын

greatly appreciate the comment

Nice!

Awesome bro.

@MrKistel

6 жыл бұрын

Thanks!

Good job

@MrKistel

4 жыл бұрын

Thank you for watching the house siding install video. If interested check out the other videos (links in the video description area) showing the entire room addition project.

Important; The ripped strip behind the bottom of your 1st course should have gaps between sections to let water drip out from behind the courses of siding. Nail it to the sill. Overhang 1st course 1/4". 1 1/4" lap is the minimum per the 2015 IRC for cementous lap siding for the courses.. Screw 1" from top edge.

@therojas9224

3 жыл бұрын

First overhang should be 1" min.

Great video thanks

nicely done. a coil nailer speeds up the process if you are looking for production. also check out "gecko" siding clamps for perfect reveals

@MrKistel

6 жыл бұрын

great tips, I provide a link to clamps in the video description

Wonderful video.!!!!! Subscribed!

@MrKistel

6 жыл бұрын

Thanks for watching, the nice comment, and subscribing. Hope you enjoy some of my other videos as well.

@neryramos7536

6 жыл бұрын

Nice jod guys

So satisfying watching this come together. What color of blue is that? I think it's so beautiful.

@MrKistel

5 жыл бұрын

Thanks for the comment, I don't specifically recall the name of the blue but it turned out well. Thanks again.

very nice

@MrKistel

6 жыл бұрын

Thanks

Excellent video. Thank you so much for taking the time to make it and share it! May I know length, width & square footage of the patio?

@MrKistel

4 жыл бұрын

Thanks for watching the exterior siding install video. Be sure to check out the other videos pertaining to the project in the video description. The length and width was about 10' X 12' and created an additional 100sqft or so of living space.

@pooh-bunny9249

4 жыл бұрын

@@MrKistel I watched them all - very inspiring ! Thank you!

Love it thanks

@MrKistel

5 жыл бұрын

Thanks Darren

When using similar materials there is no need to leave a gap for expansion both hardy board products will expand and contract at the same rate which is called modulus of elasticity.

@MrKistel

3 жыл бұрын

Thanks for the comment I was under the impression the James Hardie siding install instructions suggested the perimeter spacing was recommended.

Nice 👍👍👍

@MrKistel

2 жыл бұрын

Thank you! Cheers!

This vid was exactly what I was looking for. Love the detailed info and the bum out is new to me, I enclosed my front porch but have concrete walls. Can I use tapcon fasteners to attach the planks to the wall instead?

@MrKistel

11 ай бұрын

Thank you. I think attaching wood furring strips to the concrete wall first and then attaching the siding to the furring strips is the general approach.

@GarvinLinks

11 ай бұрын

Cool, I was told that before and asked if i'm applying strips won't it be the same or better to screw planks directly to avoid termites? @@MrKistel

nice! thanks for the tips ! great channel ! SUBSCRIBED ~ thanks

@MrKistel

6 жыл бұрын

Thanks for watching, the comment, and the sub

Ah ha! Sorry, I was dumb and didn't hit the show more button. Thanks for the heads up and this is a great video.

@MrKistel

3 жыл бұрын

Thanks again

Great job, to make it easier, just make up a jig, to space the boards. More accurate than measuring each one..

@MrKistel

5 жыл бұрын

Thanks Dave, I probably would have made a jig for the Hardi plank siding pieces to be cut if it was a larger project and I was confident everything was square and plumb.

Looks good I like the corner assembly before attaching it to the house makes good sense because the clowns that built my house didn’t have a framing square.

@MrKistel

6 жыл бұрын

Best of luck with your project.

Great job and vid. Couple of general knowledge comments. Hardin specifically says you don’t have to reprime. Not that you can’t, but for those watching you don’t have to. This is me being a bit difficult because I’ve been in the cement products business for almost 30 years, but the word is cementitious, not cementatious. You’re doin’ pretty good though, I had one great contractor who called it cinnamentatious and he wasn’t doing it to be funny!

@MrKistel

5 жыл бұрын

Thanks for the comment and insights on Hardie Plank installation

U work hard

@MrKistel

3 жыл бұрын

Thanks for noticing!

Thank you for the video! Is the trim the same dimension throughout or did you use different dimensions for corners and openings? What were you dimensions of the trim? I love the whole look!

@MrKistel

3 жыл бұрын

Thanks Karen, I believe the trim boards were 3.5 inches in width and 3/4 inch in thickness. I used the same trim throughout however a wider Hardie Panel board up where the soffit meets the exterior wall.

Cool

@MrKistel

3 жыл бұрын

Thank you

Great instructions. Should come in handy when I tackle this next week. By the way, can you tell me the paint color you went with?

@MrKistel

3 жыл бұрын

Thank you and best of luck with your wall siding project. Let me know how it turns out. I cant' recall the siding paint color off the top of my head but I believed I provide an answer in previous comments.

Cool vid man, what would you recommend to fill in satellite bolt holes in siding? I'm pretty sure it's hardie plank.

Hi there, great video on the install. I am hoping you can help with an idea how to install finishing balcony walls and posts. I have the walls figured out but your help on above would be appreciated. Thank you

@MrKistel

4 жыл бұрын

Thanks for reaching out. Feel free to shoot an email (address in about section)

Love the video! What kind of screws and what length are you using for the trim and for the siding. I see most video tutorials using nails but I'd prefer screws since I don't have a nail gun.

@MrKistel

3 жыл бұрын

Thanks, the screws and other materials utilized for the siding installation are referenced in the video description area.

Nice i like it

@MrKistel

5 жыл бұрын

Awesome, thanks!

@ovg8824

5 жыл бұрын

Yes sir i like your videos can you do a video on one backyard light to two

Fantastic

Great job and great looking siding too. Did you use the 9.25” high siding with the 8” reveal?

@MrKistel

3 жыл бұрын

Thank you Andrew. I think the Hardie Plank dimensions was 8.25"

First person i seen using screws on siding

@kungfoochicken08

5 жыл бұрын

Its cement-fiber board, so its not normal siding. You should make sure to use the specific cement-fiber screws if you use screws. This siding handnails quite nicely though.

@frost-e9562

4 жыл бұрын

He could have saved himself sooooooo much time if he used a nailgun

Very informative video. One question. Can we just use those planks as a wall, instead of a siding only?

@MrKistel

Жыл бұрын

Thanks for the comment although I am not sure I am clear of the question.

I agree with the other comments, this is a god video. i have one small question, did it actually take 2-3 cuts per side with a utility knife to snap of the end of the hardy board?

@MrKistel

4 жыл бұрын

Thank Mr. West. When cutting the HardiePanal with razor blade it often took several scores on each side of the panel to make for a clean snap point.

@hxrxld

2 жыл бұрын

Do yourself a favor & buy replacement blades.. after a few scores - it will wear the blade out!

@timjester8555

2 жыл бұрын

They make a special blade for cemintious panels for your circular saw, but it blows some nasty dust you don't want in your lungs, always wear a mask or respirator if using.

I like the videos and have looked at your supply list but I don't see any info on the final exterior color you went with. Can you let me know what color you decided on? It looks like a gray to blue which I'd like to get a sample and try it on my house. I'm looking to make a change myself. Thanks the addition looks great and I wish I could put Hardie plank on my house but that will have to wait, for now.

@MrKistel

4 жыл бұрын

Thanks for watching the new room addition construction videos. I apologize but I do not recall the color of the paint used. I will try to do some digging and see if I can find it. If I so I will update the video description. Thanks again.

Do you have to pre drill the lap boards to screw them on? And what type of screw do you use? Sorry if I missed that in the video. I'm about to re side my moms house and I have it all dialed in except fasteners. Might rent a coil nailer, but the screw idea would save some money maybe. Great video, thanks!

@MrKistel

3 жыл бұрын

Josh, I describe the hardware used to install the siding in the video description. Thanks for watching and best of luck with your re-siding project.

Hi, great video. What did you do with the exposed corner beams? Originally they were able to be seen because you poured around them but now it appears as if there is cement around them...?

@MrKistel

Жыл бұрын

Thank you. If you are referring to the bottom section of the original post they were left exposed.

@brimfrostgroup

Жыл бұрын

@@MrKistel in your hardy plank thumbnail it looks like their exposed but in the pics with blue ext they look covered so I was just wondering.

What did you do with the old walk through to the outside?Did you make a wall and a door?Did you leave old patio door?

@MrKistel

Жыл бұрын

Check out the video description to see videos of the rest of the project. In short I removed the sliding door to make an opening to the new living space.

One p;iece of vertical corner trim is all you need. Then just butt the siding from both walls, and caulk. Saves time and money. Also, generally not a good idea to nail siding directly to sheathing/wrap instead of nailing to vertical strapping to provide air gap for drying being sheathing and back of siding. Prevents rot/mildew and is code in many places.

@MrKistel

2 жыл бұрын

Thanks for the tips. I noticed the strapping method is common in other regions as well, it seems like a solid installation method.

Awesome video and great demonstration. I'm curious why you found it necessary to use primer even though the boards are factory primed?

@MrKistel

5 жыл бұрын

Thanks for the kind comment. I figured the primer would make for a better overall paint finish and protection. Most resources I came across recommended using a good primer suitable for cementatious surfaces. I think somewhere I saw a comparison of the painted finish with and without primer and it was a noticeable difference.

@BreeceMatarazzo

5 жыл бұрын

@@MrKistel thanks for the reply. That's good to know. I looked in JH installation manuals but it wasn't clear about using a primer so I didn't think it was needed. But hey, if it looks better, then why not? Thanks again. Cheers

Very informative. Great use of the utility knife to prevent dust. You made it look easy. Question. Would you install this siding on a block wall? Thank you

@MrKistel

5 жыл бұрын

Thanks for watching and the comment. You could install it on a block wall if you wanted. I have seen it done with using wood blocking to attach to the block wall and then securing siding to the blocking.

MR.KISTEL good job !!! Any work for me ???ive been installing siding since 1996 in Georgia

@MrKistel

6 жыл бұрын

Thanks for watching and the comment. This was a personal project, I actually don't install siding commercially. Wish you the best on all your future projects.

I see where you say that you use finish head screws for the trim pieces, but I'm wondering what you use for the lap boards. Are you using trim heads for that also, or the hardie backer board screws or something totally different? Thanks!

@MrKistel

3 жыл бұрын

Josh, check out the video description area. I include the hardware utilized for the Hardie siding installation there. Thanks.

Its wonderful but plz tell me how did you attach plank to the wall?

@MrKistel

4 жыл бұрын

The siding was attached to the to the wall as shown in the video using the screws shown in the video description text. I hope this answer your siding install question.

Is it just brick behind that paper or did you put in some furring strips framing wood drilled into brick 1st?

@MrKistel

4 жыл бұрын

This spaced was framed and wood sheathing was added prior to the insulation of the exterior siding. See the previous plywood sheathing install video here.... kzread.info/dash/bejne/f6ecttuwmae5nc4.html

man you make it look so easy...can you do my house please ? :)

@MrKistel

6 жыл бұрын

Haha thanks, I may have left out some of frustrating moments from the videos! Best of luck with your project. I hope the videos are helpful to you.

It's a good video but I wish you could zoom in the details like the bump out, screwing etc... I m completely new in this work but dying to do my balcony wall

@MrKistel

4 жыл бұрын

Thanks for the comment. please let me know if you have any specific questions about some of the details I may have missed.

👌👌👌👌

Looks great. What color and paint brand is that?

@MrKistel

3 жыл бұрын

Thanks, I mention the siding paint color in previous comments. I want to say it was bungalow blue or something along those lines. Take a look at previous comments to confirm.

Whats the material of the wall where you stick the hardiflex? Is it would or fiber cement wall?

@MrKistel

2 жыл бұрын

The siding is cementations based and it is attached to a plywood wall sheathing.

Maybe I missed it but how did you rip down the length of the siding for the long cuts around the window?

@kamalakrsna

2 жыл бұрын

Other videos: (&Mee) Say: use an angle grinder w/a diamond blade/disk. WORKS well & companies make those diamond blade disks with the correct arbor hole. $12.

Awesome. Is this porch insulated enough to use it as a living room?

@MrKistel

5 жыл бұрын

Yes, I used deeper framing members in part to add more insulation value in the walls. This room was an addition to an existing living room. Note: this house is in a southern location. Construction and insulation techniques would likely vary if building in a more northern climate.

subscribed...

@MrKistel

4 жыл бұрын

Thanks for watching the house siding installation video and the sub Guar!

what did you do to cover the base of the 4x4 posts? I see one looks covered with concrete at the end of the video and other other is open, but photoshop?

@MrKistel

2 жыл бұрын

the bases of the 4X4 post were left open to avoid trapping moisture.

I wish you showed how to do those 90 degree inside cut-outs using the score and snap method... after all, what could go wrong for a novice? And is there a glue you can use on your furrring strip in below-0 temperatures?

@MrKistel

3 жыл бұрын

Thanks for watching and just check the adhesive manufacture's label regarding temperature limitations.

thinks!

@MrKistel

4 жыл бұрын

Thank you and I hope the siding install demonstration video was useful for you.

Please can you help me with size (width) of the boards, both the one used for the corners as well as those laid vertically. The reason is that, the part of the world don't have the already slice board on the market. It comes as one full piece, so one has to cut it to his or her preferred size. Hope to hear from you soon. Thanks

@MrKistel

6 жыл бұрын

They offer the planks in a few different width options here. The corner and perimeter trim is thicker then the plank siding pieces and could not be cut out of the same stock panel. If you have to cut the planks you could probably cut them any width you prefer. These I believe were 8.25 inches wide.

Si yo lo pusiera asi me carga la chingada con caulking por todos lados y sin usar serrucho ademas con taladro wow estos tipos si son perrones

Nyc

What is the paint color code of that blue? Looking pretty good.

@MrKistel

4 жыл бұрын

I cant seem to recall the color we painted the new room siding but I will follow-up if I find out. Thanks

What color paint did you use for the siding??? We plan on painting our house from pale yellow to a blue.

@MrKistel

4 жыл бұрын

I can't recall the paint color of the siding off the top my head but I do mention it in a comment below.