Hard work Pays off! This DA integra isn’t Clownin around 🤡
Автокөліктер мен көлік құралдары
Lewis has worked super hard and made all the changes he needed to to get on the dyno. Once we installed his boost kit and worked through a corrupted file we put the smack down on this bad boy and it paid off. Being right at the limit of the clutch we ended up backing it down a bit and sent it home rippen !
import face-off comment here to let them know if we should twin turbo the Nsx
• New England IFO 2019 w...
Thank you to all our sponsors and friends
www.astrotools.com/
www.usaweld.com/Default.asp
street2track.net/
Merch and the parts we use are available at
pfispeed.com/
Also check out and subscribe to boostedboiz at
/ @boostedboiz
Send things to
Pfispeed
P.O. Box 503
Wellington,CO
80549
Пікірлер: 290
Whoa this things a beast
@stillclownin176
4 жыл бұрын
Its mine thanks and ya it was on your back round one time look so dope i watch your videos also i just started missing with mine again its under still clownin integra
@williamworkman4520
4 жыл бұрын
Was that da sleeved LS
@stillclownin176
4 жыл бұрын
@@williamworkman4520 no it has the css block gard
@jdmbuilt9258
4 жыл бұрын
Still clown'in what compression pistons you running ?
@stillclownin176
4 жыл бұрын
@@jdmbuilt9258 just very little over its 82mm pistons
that monster needs new mounts that engine moves so much lol
@kfreeman4992
4 жыл бұрын
It probably is missing the front mount due to the turbo piping.
Call me immature but I laughed when he said “Feed her some duty” 😂
@jamesbadham3872
4 жыл бұрын
Lol... "Doody"
@digital0785
4 жыл бұрын
me too lol.i giggled and then though good lawdy i'm such a child lol
@IlIlIIllIlIlIIll
4 жыл бұрын
Glad I’m not the only one :D
@Scottstunts
2 жыл бұрын
Me too….lol
"all i did is fill in the hole "😂😂😂
Holy...... that DA was wanting to just keep on climbing 🧗♂️! It’s awesome to see how well you take care of everybody’s cars by setting them up with a “street” tune. A lot of shops will tune to the max and send em out! PFI Speed always treating each car as their own 👍🏼
too cool. i love you guys yo. "he has the boost kit in his hand and i mean i got the soldering stuff." next scene: got the boost controller hooked up. plenty of other instances like that on this channel, makes it a real pleasure to watch these vids. Also makes me wish I was out there in CO making some jam with y'all!
Love seeing people still rocking these older platforms. I had an 89 Prelude Si years back and it's still probably my favorite car of all the cars I've owned.
@iamblaineful
4 жыл бұрын
Had one too, loved driving that car, was new the day I graduated.
Another Awesome PFi tune video with a cool little Rad Teggy. 620+whp Nice👍 That's one more hotrod out there with a magic tune from the Master Himself... PFiSpeed/BoostedBoiz Rcks! 🤜🤛😎🔰🔰🔰💪 Lol lov'd the front windshield sticker but Ain't No Clowning Now!!!
Jamie is such an A1 dude
these videos and all other content make my days just cos i work 3rd shift (11pm-7am) and usually i can’t sleep right away so these are very therapeutic to watch in the morning
I just love seeing all of the sick builds that roll up in the shop 🔥
It's great to see that it's not All Out Horsepower. But tune it right for the build. Great stuff guys! Love your knowledge.
The da’s are so under appreciated it’s such a sick car I love mine people always asking wtf it is
@kfreeman4992
4 жыл бұрын
The Da is legendary. I have one. Last time I went to get tires, the guy who installed them asks me. "Is that a GSR?" I answered "not yet" lol.... He looked really disappointed ☹️
Sup Brent. Got the meet you at import vs domestic. I’m the guy that you lended a funnel 2. Not quite the W but you guys had no quit. Love to see the crew in Cali more
@PFIBrent
4 жыл бұрын
We had a ton of fun and learned a lot. It was a great time and great meeting everyone . Thank you for coming out .
@justa5oh136
4 жыл бұрын
PFI Speed you guys are great. Really had a aura around you guys. It was cool seeing you guys just doing your thing. Not around your crazy regular crowd but handling business and greeting individual fans
Who can dislike a PFI video ffs, you come for good vibes, tuning, pop bangs flames, sho’nuff and smiles, and thats exactly what you get
@johnmichealsburnett8888
4 жыл бұрын
Indeed 🤜🤛
Good old Bret never ceases to put a smile on my face ! What a great guy he is, and Jamie too !!!
@skaterXYZ
4 жыл бұрын
Bret
@johnmichealsburnett8888
4 жыл бұрын
@@skaterXYZ lol it's all good we know Davo meant Brent Leivestad
i see brent i hit like
“It’s wicked cool man” see you picked up some New England slang lol!
Man listening to the engines on the dyno. Its like therapy. Keep up the great videos!
I always learn something when I watch these tuning vids. You guys are awesome.
Always nice. I learn small tech tips each time
Channel deserves way more views and subs
Just saw Roman roamin’ around the shop!
Got to get some motor mounts on that little monster
1:32 Panchie sticker!
@Jeremy_Hill_2020
4 жыл бұрын
😔 sad to see him gone 😢
Awesome rep for the DA family! Awesome tune, Brent! Can't wait to boost my DA.
I have the same fuel rail and pressure regulator. They are still working great since 2015.
Holy shit man! Things crazy cool, love the vids
DA love. Keeping the DA's alive.🤜🏽💥🤛🏻💯
@db2alex746
4 жыл бұрын
Scorpio7 XXX amen 🙏
Haha looks like the cars gunna tear in half when your flooring it!🤣😎
PFI Speed and the Boyz always keeping me motivated to get back in the garage and turn some wrenches 🔧 until the work is done ✅ 👏🏼 👏🏼 👏🏼
Emilio and Roman be slackin while Kyle is away! LOL
Ah the DA Integra, My first car! good times. i just rebuild the B18 and suspension in it, i would love to go LS/V but its hard to give all the projects attention, Still need to get a IACV for my K24 EP3.
Beautiful build man love DAs! Monster build!!
Siick DA. Man I miss mines 😩
That garage you guys are in is awesome 😎
Just love how the vtec sounds on a B series
Hell yeah good to see da integras still around!
Always look forward to your thanks brent and jamie
As soon as I saw the coil on plug I was like “it’s gonna make some jam” .
I love these old integras! The early 90's square body I love them!
Car is sick .. that engine bay color is freaking 🔥 nice
Hell yea da integra cant wait to get mine out, goal is 700whp
Always great to see Brent cheer when a car puts up a great number.
Epic tunner Brent hell yeah brother 👊
I bet it would burn rubber in 5th.
♥️ that ending og sub now I can sleep good tonight keep up the great job PFI er for life
Some day I hope I could meet you guys are great at what you do an I enjoy watching everything you do
I miss seeing DA's driving around with chrome 3star in full reverse offset.
That thing rips! Let's go
you guys rock!
Builds whole car: neglects to put new motor mounts in 🙄
@DcBoy261
4 жыл бұрын
Austin Bennett all my cars have had solid motor mounts so far and I could never imagine, just seeing it move alone scares me lol
Yea that integra is going to boogie!!
1:34 RIP PANCHIE
Nice hp numbers, nice ride, beastly :)
Good stuffs y'all
Just clowning around 😀👌👌👌
It needs a channel I’d like to see this car a lot more
@stillclownin176
4 жыл бұрын
I do have a channel but im about two get going with it more its under still clownin integra
@streetfighters805
4 жыл бұрын
Still clown'in ok I’ve subscribed
@sinformant
4 жыл бұрын
@@stillclownin176 interested in a different insert for that hks bov? I designed a couple for the one on my car. I wasn't satisfied with the two options hks sells.
@stillclownin176
4 жыл бұрын
@@sinformant ant bad what you have
@sinformant
4 жыл бұрын
@@stillclownin176 I got a cobalt ss with a little bit of work done to it and a tune running a ssqv4 as the stock bypass valve wouldn't hold past 20 psi. Currently sitting waiting to have the time to drop in the new better motor. The two.inserts I made one makes a louder whoosh and a much louder whistle than the original hks insert. The other one makes a high pitched whistle under higher boost, and an eagle screech under low boost and vacuum shifts. Both are pretty loud. You can here them blocks away. Or at least they are on my car.
Sick🤙
Common Craig! haha dude I fucking love you guys. I've never seen someone other than myself be this way about cars, more specifically properly built Hondas.
Damn that's one rowdy Integra!!
nice tune
Omg thumbnail game on point
Thank you guys yes i know i need motor mounts and soon and sorry on lug nut this dyno was planed at the last min lol but we send it for my boys rip and for me i loved the out come and wish 730 but hopefully soon after i can afford a twin disk clutch but i do have a goup page its still Clown'in and a like page and also and Instagram under still_clownin so check me out and thanks for all the love on here that gave me it
@nicolasbrown9907
4 жыл бұрын
What letter is the apostrophe replacing in your name? It should be clownin'.
Is cop better then the stock distributor. I put the stock coils back on my dsm and it runs about the same. Maybe a bit smoother.
good little turbo
Hondaru just chilling back there
The thumbnail 😂
Always like before you watch! You know it's going to be a great video!👍. Love that click bait!!!!
SCREAMING YELLOW GIRAFFE FETUS!
Wats the small hick ups a idle from? Tight plug gap?
Love the Vtec crossover 😍
you have the best job in the world lol and you do it so god dam good !
Needs solid mounts for sure!
Another day at the office!
Dear god.... Brent, hook him up a new pitch mount my guy 😂 Awesome video
Needs mounts...those are worn BIG time. SO much movement...he should hit up Brian @ HASPORT and it will be solved under 400 bucks.
@AnalogAssassin1
4 жыл бұрын
On a side not, another great tune man
@stillclownin176
4 жыл бұрын
Thank u and ill look in two it asap because twin then more power soon
@AnalogAssassin1
4 жыл бұрын
@@stillclownin176 that twin will do wonders...you may have to go back and have them give it some more juice because it sure will hold it after that ✊🏼
@stillclownin176
4 жыл бұрын
Ya im hoping soon we need that 700 mark atleast 😔 just got two save for a twin disk some how
@stillclownin176
4 жыл бұрын
@@AnalogAssassin1 you know his full email for motor monts
Haha Brent said duty! Lol
i have 93 da we only have 93 octane in maryland how much power will Ls engine make normally versus Ls with vtec head and of course built bottom end??
one more happy man oo my PFI
That thing needs motor mounts BAD!!!!!!
@wackomanx
4 жыл бұрын
I have a set of 1992-93 Integra GSR Hasport mounts in u70a sitting on the shelf. I bought them when Hasport first started making them so they are for a cable transmission setup. I used them for a month before I bought my second DB2 Integra. Never got around to installing them. They look brand new.
Aye just out of curiosity, whats like general dyno protocol if say Brent’s tuning your car and your engine happens to blow up for some reason?
@adamfaler1861
4 жыл бұрын
Clean it up and push it on the trailer.
After all that work he goes to launch it in the motor launches right out of the hood
First pull 357 sheesh 💪🏽
IS that bottom end built? Like to know the specs. I'm guessing its built but how built, sleeved and all the bells and w h istles? Some dudes push those LS/Vs far lol.
This makes me want to get my da out and running again
@tyler238
4 жыл бұрын
pennsylvaniapatriot what’s wrong with yours?
@gerneticut
4 жыл бұрын
@@tyler238 clutch, trans and an alignment. I have a trans just need to get the clutch and do the work lol
Please like, subscribe and leave a comment down below. Catch ya tomorrow.
Those big rear view mirrors seem like safety hazards. Once you get used to that big mirror you'd feel kind of lost if you got in a car with a regular mirror. Every time you look up your mind would be clouded for a second or two until you got your bearings straight.
Damn I was hoping to see a street pull... brent. Buddy, I think every video should now have to end in said car doing a pull in front of the shop please sir
Rev Limiter : no one ever Brent: always
@PFIBrent
4 жыл бұрын
We have to know 😉
@DurpandDurp
4 жыл бұрын
Hey can’t blame you homie
Cmmmon' CRAIG!!
Been a bit. Miss y'all Love peace and axle grease brothers
@PFIBrent
4 жыл бұрын
Whoo hoo!! Wait until you see the shirt I’m workin up
@thejustmechannel3298
4 жыл бұрын
@@PFIBrent oooo snaps. Woohoos!!! Cant wait gotta go check ya store for goodies more. ;)
When Honda guys say ls/vtec what engine is that ? Is that any v tec B series ?
@youngbula2990
4 жыл бұрын
It's a Ls b18c engine which is vtect I have a regular Ls Motor non vtect.
U guys should move down to Massachusetts to tune these Honda’s
Bet the torque curve is crazy on this. You should put the torque spec on the graph
I dig it
engine mounts asap, that thing is gonna leave the car behind one day, coyote style
sleeved or stock sleeves? Reason I ask is that I'm getting my car tuned next week. How much hp can stock b18c sleeves take? Motor is built, but sleeves are still stock like I mentioned. Thanks in advance! P.S. car is running on E85
@PFIBrent
4 жыл бұрын
This is a css. , Jamie makes 600hp, Stock sleeves even with a block guard can be hit or miss. Just feel it out and work into things.
@chensueher1393
4 жыл бұрын
@@PFIBrent Thanks guys for the quick reply!
I love the videos . Where is your shop located. I have a 8th gen civic si . With cams injectors full race exhaust.plm header . Was abandoned by vit viper a while back . Tune in progress . Can’t find a tuner here in Knoxville TN that anyone trust .
@MajorDeadline
4 жыл бұрын
Do you do any Datalog tuning . Or only on sit dyno tuning ?
@PFIBrent
4 жыл бұрын
Both, we have a dyno going in around Nashville right now 😉
Hey @PFISPEED what what a good afr at 18lbs boost under WOT??