Harbor Freight Industrial Utility Cart Assembly & Review

Just wanted to show you how to assemble utility cart from Harbor Freight. Takes about 10 minutes and all you need is a Philips head screw driver and a 14mm wrench. Cart holds 500+ lbs. Castors are meant for a flat service. You can purchase some casters with air in the tires so you can go off road with this cart.
Affiliate Links:
Harbor Freight Cart: bit.ly/3xNkd2K
36x24 Utility Cart: amzn.to/3BEGIIw
46x25 Utility Cart: amzn.to/3LG0VC3 (Better Value)
Screw Driver: amzn.to/3Sc2Aln
Wrench Set: amzn.to/3R3to60
Socket Set: amzn.to/3BGwgA7
Drill/Impact Set: amzn.to/3DMdNEY

Пікірлер: 39

  • @LoveClam
    @LoveClam8 сағат бұрын

    I just found one in their dumpster in my area. A small piece was chipped off of one of the legs. But there they slide lock in it doesnt really matter a ton and this video helped! Thanks so much!

  • @thelittlethingskate9567
    @thelittlethingskate9567 Жыл бұрын

    Thank you!! This was a huge help after I tried to decipher the horrible instructions that came with the cart!

  • @NicholsCounty

    @NicholsCounty

    Жыл бұрын

    Ha. Yeah. Glad it helped

  • @robcarr8505
    @robcarr85055 ай бұрын

    I'll definitely be picking one up next week. Thank you for the detailed assembly video. I was considering a cheaper cart from Amazon but this looks much sturdier. 👍👍

  • @NicholsCounty

    @NicholsCounty

    5 ай бұрын

    Great. Yeah I have 4 of them and use them everyday. They're holding well.

  • @guysevedz3581
    @guysevedz358111 ай бұрын

    Thank you for the great video, it really helped

  • @NicholsCounty

    @NicholsCounty

    11 ай бұрын

    Thanks

  • @galloram11
    @galloram113 ай бұрын

    It was a great help to watch this video. Thank you 🙏

  • @NicholsCounty

    @NicholsCounty

    3 ай бұрын

    Glad it was helpful!

  • @REVNUMANEWBERN
    @REVNUMANEWBERN6 ай бұрын

    BEST assembly clip, got a 👍

  • @NicholsCounty

    @NicholsCounty

    5 ай бұрын

    Thanks!

  • @prosafetytraining646
    @prosafetytraining646 Жыл бұрын

    Great Video on putting this cart together. For some reason my cart was missing the screws that fit the top to the legs. Do you know what type, number kind or size screws you used to connect the top to the legs please? Thanks in advance.

  • @NicholsCounty

    @NicholsCounty

    Жыл бұрын

    I think any screw would work in there. Go to the hardware store and get like 5 different sizes and see which goes in there the best. I was able to hand tighten them to start.

  • @marcusseger2583
    @marcusseger2583 Жыл бұрын

    Great video, I bought one today and the instructions are terrible. Thank you for the video it will be simple to get this thing together in the morning after I undo what I did this afternoon.

  • @NicholsCounty

    @NicholsCounty

    Жыл бұрын

    Ha. Yeah. It's all made in China. What do you expect. Good luck and thanks

  • @jamesfcook
    @jamesfcook10 ай бұрын

    Your assembly instructions were excellent. Solid info presented clearly and quickly. Thanks!

  • @NicholsCounty

    @NicholsCounty

    10 ай бұрын

    Thank you so much.

  • @REVNUMANEWBERN
    @REVNUMANEWBERN6 ай бұрын

    5:54 GOOD, it looks like you can assemble this WITHOUT the handles, I'm planning on using one of these to set my propane generator on the top & 2 grill propane tanks on the bottom, without the handles I can have a custom cover made that will slip over it all since it will remain on my screen in porch to keep the dust, lizards & little tree frogs OFF & OUT of the setup, I'll keep it in the corner till I have to roll it into place when using

  • @NicholsCounty

    @NicholsCounty

    5 ай бұрын

    Yeah you can. I have one without the handle.

  • @andrewtoth7674
    @andrewtoth767410 ай бұрын

    What is the hole pattern for the casters? I wanna order pneumatic casters before I buy the cart Because I know if I get the cart, I'll assemble it with the wheels it comes with and then I'll never disassemble them to put the pneumatics on

  • @NicholsCounty

    @NicholsCounty

    10 ай бұрын

    4 hole

  • @Saladon89
    @Saladon899 ай бұрын

    Did i get a bad cart? The cart not broken or anything but the fit and finish is bad. Had to hammer in the 4 legs and had to hammer some of the bolts into the square holes in the bottom for the casters. Is that normal or did i get a bad cart?

  • @NicholsCounty

    @NicholsCounty

    9 ай бұрын

    I haven't had this issue. But these are cheaper made products so it makes sense some wouldn't be perfect.

  • @Saladon89
    @Saladon89 Жыл бұрын

    they have 2 different brands, haul master and franklins maybe thats why theyre different. I think the franklins are the new updated one with the lighter color and fatter wheels and hf still sells both with same price which is confusing. Can u confirm this theory?

  • @Saladon89

    @Saladon89

    Жыл бұрын

    nvm saw another that was a haul master and it looks just the franklins, with the fat wheels and light color.

  • @NicholsCounty

    @NicholsCounty

    Жыл бұрын

    These were both from the same box. Same store.

  • @REVNUMANEWBERN
    @REVNUMANEWBERN6 ай бұрын

    8:34 You very well may of got one of each BRAND , they sell 2 different brands that look identical a Franklin & a Haul Master

  • @NicholsCounty

    @NicholsCounty

    5 ай бұрын

    Yeah that's what I figured.

  • @lgarrison6300
    @lgarrison63006 ай бұрын

    It is possible to leave out the handles? I don't need that part

  • @NicholsCounty

    @NicholsCounty

    6 ай бұрын

    Yes

  • @frankw3ll
    @frankw3ll6 ай бұрын

    Rubber or pvc wheels?

  • @NicholsCounty

    @NicholsCounty

    6 ай бұрын

    Yes

  • @mmgwave
    @mmgwave5 ай бұрын

    Crazy that now it retails for $139

  • @NicholsCounty

    @NicholsCounty

    5 ай бұрын

    Prices go up.

  • @mmgwave

    @mmgwave

    5 ай бұрын

    @@NicholsCounty yeah, I still picked up after watching your video. $129 with tax after 15% coupon

  • @MrReyes-bq1xh
    @MrReyes-bq1xh6 ай бұрын

    🤦🏽‍♂️

  • @NicholsCounty

    @NicholsCounty

    6 ай бұрын

    🤦🏽‍♂️

  • @DemolitionDaddy69
    @DemolitionDaddy697 ай бұрын

    Thank you Sir, the instructions they give are awful.

  • @NicholsCounty

    @NicholsCounty

    7 ай бұрын

    I'm here for you!