Nice video say hello to the happy dog for me

@CopperBarnHomestead

2 ай бұрын

Thanks for watching and your comment Absolutely! Have a great day and be safe!

Thanks for the video. I just assembled mine today and realized i forgot to buy grease😂

@CopperBarnHomestead

11 ай бұрын

Oh no! Thank you for watching and your comment. I think you will really like it once you get some grease. Have a great day and be safe!

Got one . I’m a truck driver. Works GR8: about 38 grease zerks around a straight truck / 3 axles. 😮. Not premier just pump it up . Easy. Life is good

@CopperBarnHomestead

Жыл бұрын

Awesome, we agree. Thanks for watching and commenting. Have a great day and be safe!

@Amarillobymorning777

Жыл бұрын

@@CopperBarnHomestead 😎🙏🏼

Nice video sir. Definitely getting 1 next week.

@CopperBarnHomestead

Жыл бұрын

Thank you for watching and your comment. Hope you like it as much as we do. Have a great day and be safe!

Great video, I’ve researched these on Amazon and I decided the harbor freight was the best one for the price plus they had a 25% off coupon so I bought it today and I think it was $54, great grease gun and I wanted to double check on that extra copper washer that came in there it’s a crush washer and I hesitated to use it but then again because the other bolt has one in the heads I’m going to install the crash washer and I’m still going to use a little bit of Teflon tape just to be safe it’s always a good idea

@CopperBarnHomestead

Жыл бұрын

Thank you sp much for watching and commenting. That is awesome and those coupons are great! I hope you have good luck with your grease gun we really like ours. Thanks again and have a great day!

They have made and supplied these to Harbor Freight for years. From what I can see, it's the same design. Mine has lasted me for years.

@CopperBarnHomestead

5 ай бұрын

Thanks for watching and your comment. Yes we have had that one for a few years already and it is still working perfectly. There is one that says pneumatic but doesn’t say automatic and you have to hit the trigger every time you want a dab of grease. I had that also and didn’t like it at all. The automatic one is great it keeps pumping grease as long as the trigger is held down. Have a great day and be safe!

Good video, will a regular 14oz grease cartridge work? Or do you have to change the plunger? Thx

@CopperBarnHomestead

Жыл бұрын

Thank you for watching and your comment. Yes, I’ve just been using the 14oz tubes and no problems. Thanks again and have a great day!

Nesecito por favor que alguien me pueda ayudar tengo una pistola holt t solo consigo que heche aire por el resuello no bombea por la manguera quizá 3 veses le di uso y no consigo engrasar nada que puedo hacer gracias

@CopperBarnHomestead

2 жыл бұрын

Thanks for watching and your comment. It sounds like you need to prime your grease gun. The vent cap on the top can be loosened then operate the gun until grease comes out the vent either through the end or around the threads. Then tighten the vent and you should be good to go. If that doesn’t work you can loosen the grease cartridge case a couple of turns and operate the gun a few seconds then re-tighten the cartridge case and that should make it work. Priming just removes the air between the grease and the outlet and only is a problem when changing grease cartridge’s. I hope that helps and thanks again for watching and your comment. Have a great day and be safe!

Nice Video - Could you please answer a few questions regarding the air compressor? I have a Harbor Freight CENTRAL PNEUMATIC 3 Gal. 1/3 HP 100 PSI Oil-Free Pancake - Will that provide enough air pressure? Thank You

@CopperBarnHomestead

Жыл бұрын

It should if it goes to 100psi, you may have to take a minute between grease fittings to let your tank build up if you are greasing a bunch of fittings but I am pretty sure you have enough air to operate the gun.

@Archivist953

Жыл бұрын

@@CopperBarnHomestead Thank You for replying sooo quickly Mr. Cooper Barn! - Merry Christmas! *BTW Is your barn really copper? LOL

@CopperBarnHomestead

Жыл бұрын

@@Archivist953 Merry Christmas to you as well. It is steel but is painted copper color. Lol

Is okay if their is old grease that is left in the stuff I just bought mine yesterday and I never used it also is the spring supposed to be a little bent

@CopperBarnHomestead

Ай бұрын

I don’t think there should have been grease inside it if you just bought it. The spring does kind of bend as it compresses but if it looks bent and kinked it might be another sign that someone already purchased and then returned the one you have. Have a great day and be safe!

Welcome to your new Homestead life. I don't know if I trust those clean hands and unused tools :) Thanks

@CopperBarnHomestead

9 ай бұрын

Thanks for watching and your comment! Have a great day and be safe!

What size air fitting is needed

@CopperBarnHomestead

3 ай бұрын

Thanks for watching and your comment. It just takes the standard 1/4” you can buy in the multi packs at HF. Have a great day and be safe!

Without the grease coupler won't it work?

@CopperBarnHomestead

2 жыл бұрын

Thank you for watching and your question. Yes it comes with the standard old style coupler and that works ok. The lock and lube copy works so much better though I would get it too. Once I used a locking coupler I never want to use anything else. Have a good day, be safe ❤️