Hanro Studios Dremel Engraving Tips and Tricks
Hank Robinson shares some tips and tricks on engraving, using some new high power Dremel accessories on aluminum. Hank goes through steps to set up your Dremel and a few ways to transfer images and drawings. Hank shares specific ways to use different burs and what are the best speeds to use them at.
Video by TXP_Media
Follow Hanro Studios Engraving on all Social Media -
WEBSITE- Hanrostudios.com
IG - / hanro_studios_engraving_
Facebook - / hanrostudios
TikTok- vm.tiktok.com/KYV3aD/
Пікірлер: 88
Absolutely brilliant bro. I love your work, been following you for years. Thank you for starting a KZread channel and helping us beginners out.
This was exactly what I was looking for! I've been curious if I could use the Dremel for engraving. I was doubly excited when I found out that you were also a veteran and are from Phoenix (my family lives there). Such amazing work and you've seriously inspired me. Thank you! Now I need to learn how to do this myself. So glad to see that you're involved with the Wounded Warrior Project. Keep up the amazing work!
@1nOnlySB
2 жыл бұрын
How do you make sure that artwork stays unchanged ( or not prone to new scratches while cleaning the engraved on the vehicle during cleaning)? Basically, my question is what measures does one take care after engraving
What bit was used for you eyes tattoos
@TownBoSs510
4 ай бұрын
Eyes or eye lids 😂🤣
Thanks for posting, exactly the vid I needed. Decreasing the pressure at the curve helps a lot
Thanks so much for all the great info! This is very helpful as I'm just starting out with engraving. Thanks for sharing.
I have you to thank for the quality of the phrase "Git Rekt" engraved into my 1911 slide 👍
Thank you for this. Great info for a beginner like me.
OutFreakingStanding! You = my hero. Badass work my friend!
Beautiful Work
Cant wait to see more videos bro looks sick
Just started engraving motorcycle parts for my uncle's shop and really appreciate any tips to help get better results. Thank you
probably the sickest intro I have ever seen on youtube
Nice one for the great info hank 🤙
Great work brother!
Love your work brother, you have got some serious talent! Thanks for the tips. Just couldn't see what you were doing in the beginning.
Sick !!! Big thumbs up, thank you for your service and Bad Ass engraving !!!
thank you! i have been too nervous to play around with electro etching, this i can do!
Very nice info my man.
Wow nice work !
Thank you to the tips on speeds, using you hand as a base, types of bits, how to corner, your different techniques. So, so helpful. Please post more technique and how-to videos, boss. Your art is awesome, btw. I'm still working with wood.
Awesome bro..! Greeting from Chile
@HanroStudiosEngraving
4 жыл бұрын
Much love bro!
Great artist.
Thank You!
Saw your videos on TikTok. Would love to see more on you tube as many of my friends don’t use tiktok.
We want more videos Hank!! Get to it!! xD
Perfect 👍
Love your work.. and the simple approach to explaining the process. Being I am new to this type of engraving I was wondering do you buy aluminum with the darker surface and if so where can someone purchase it. I've never seen that type aluminum. Thanks for any help.
Off topic question? Well first things first. Thank you for your service and your work is fantastic! I was in the 82nd back in ‘03-‘06. So the question I have is about your freedom truck. Do you know the size flag needed for that headliner? Wanting to do that to my truck. Don’t want to undersize it.
Awesome informative video Can the Dremel burrs be used for engraving on Granite Stone.
Hanro I have a question. What do you use to engrave the metal on a car. And how do you seal the engraving so it won’t rust on the vehicle.
Nice apron🙌
What burr can use to give a water effect
Dam I live your vids bro this is sick am trying to I learn
Hi ,thank you for info .I want to start engraving could you guide me which dremal is good for beginners.
Any benefits to these bits compared to the round bits? Like the 105 or 106? Thanks
Thank you very very much Mr. Miyagi I’ve been tattooing since I was 12 I am 44 Now I think it’s time to learn how to engrave
@TheRealMisterChopShop
3 жыл бұрын
I know it not the same but I will be a quick learner
Nice truck bro
Would wish to learn Sir
I made a number of tools that I would like to engrave with all the same engraving on the steel rod. Is there a way I can make a pattern to do multiple?
Should I paint the cover black like you have here and do a carbon transfer?
Would request some links on where to buy
Man I love ur work how much does it typically cost to do handle bars tho
Your awesome 😎
What do you use to blackout the background of the engraving?
What kind of dremal bits did you say you used
Your q bad ass bro seriously amazing what you do with a dremel truly inspiring watchin your work 🙌 hella tight and did your lid tats hurt Haha they is tight tho 💪💪💪💪
This is so fkn boss🔥🔥🔥🔥🤩🤩🤩
How would you just regular sheet metal please thanks in advance
Would love to show you my work and learn more from you
I have a large stainless ice bucket I want to hand engrave as part of a large trophy. What bit type & speed should I look for? I'm not interested in laser engraving or chemical etching... and most companies won't engrave it because it's a curved surface, hence the hand engraving plan. Any suggestions would be appreciated!!
which bits are needed for shading and diamond cutting thx
You said 115hp for diamond cutting?
Where i can found that bits?
👍👍👍👍👍👍👍👍👍👍
How do I transfer an image onto a primary cover? I engrave pnuematicly, some Dremel, but mostly pnuematicaly. Your not hiring any help or need aprentice right? Love your work I talk about you all the time. Thanks.
Any discount codes for Dremels
tell me how the method of hammering copper wire is called correctly?
I got a good question. How often do you get metal in your eyes? I get em in mine even with glasses on
@FOOKYOUTUBENUMBERS
3 жыл бұрын
Use goggles Dude
@alienman7866
3 жыл бұрын
@@FOOKKZreadNUMBERS yea i switched to full eye coverage waterproof googles.
Can I use a regular Dremel 3000 for engraving also? I'm just trying to make a simple ID tag for my cat.
@landas2268
2 жыл бұрын
Lol yes
What dremel are you using and what bit is the best for the chrome parts?
@B.V.Luminous
Жыл бұрын
Dude the very beginning of the video he says exactly the Dremel model he uses.
Is metal rash a problem for u?
Where ti buy carbon and those tools from dremel.
I got a 92 bubble caprice bone stock but I want to engrave my name “Booyow” in the 3rd tail light 💡 hey I just want to say thank you for this
can i see the closer
And most importantly, try to think along the lines of COINS instead of sculptures, meaning not too deep or you'll create a potential for cracks. Especially in decades old pieces of cast aluminum from the shovelhead days.
Where can I get a pneumatic hand held machine like yours. I've done about everything from tattoos, airbrush, wood burning. And I can freehand draw everything.
@T_2_the_ravis
8 ай бұрын
But I'm really interested in doing this with my compressor on my billet wheels.
Where can i buy the tools ?
@yeseniaalcala
3 жыл бұрын
amazon
You should post more on your channel. Build your followers .$$
*holds up aluminum* Is blank
You just where in food place on taco Tuesday and i was the brown kid but I dont need this
like it but I don't want to mess up the 666 likes
Does he have eye shadow on?
Fail in the link tiktok
All this work into a channel to only release one video that's a paid advert, 3 years ago
Hey brother, how about putting the camera on what you're doing instead of on yourself. That way we all can see what your doing.
Can't listen to a dude wearing maskara