Mind Warehouse ► goo.gl/aeW8Sk For copyright matters please contact us at: copymanager.mn@gmail.com / @incredible-qq2zi
Жүктеу.....
Пікірлер: 449
@brianstevens385810 ай бұрын
Don't use salt on a screw hole that will eventually corrode the screw and cause it to let go, Use a wood pin {Toothpicks/golf tee/spoon handle/etc.} if want to use dust use saw dust and glue.
@jeffbuck2624
10 ай бұрын
Yeah... and if there is any chance of it ever getting wet, the corrosion will be terrible, but the salt and the screw's hold will be gone.
@user-cq6km9vq2m
10 ай бұрын
Getting screwed does leave one salty, though. Jus' sayin'
@randykiessig3365
10 ай бұрын
@@user-cq6km9vq2m You have a twisted sense of humor.
@maximus1811
9 ай бұрын
EXACTLY, TOOTHPICKS WORK PERFECTLY. 👩🤗
@djosearth3618
3 ай бұрын
that's a good point i forgot about that one, that was a a very stupid one but among only about 3-4 not the normal 50-100% :). Ya everyone should know to use splits of scrap wood or rounded up used paper or nearly any inorganic trash really just not salt I use dried little twigs alot but never toothpicks (anymore), i'm trying to be more ecologically concious but not too ppreachy sorry if i came off that way, atleast i'm not using a fork to hang a little picture hehe (sewing needles sometimes work great for that tho) w love and respect from Canada!
@herdHistruth10 ай бұрын
3:00 that's not to "increase the inner diameter" it's to get a broken pipe out of the coupling
@GarnierOlivier10 ай бұрын
It’s already bad to steal other people videos to create a click bait, the guy commenting half the time doesn’t even understand what the trick is actually for 😂
@rosebud961
4 ай бұрын
I really don't even like his voice either. And I like for them to explain what and why and how whatever it is they are doing, ya know what I mean.
@AimeeAimee444
2 ай бұрын
How about the mosquito singing in the background! 😂🤣🤣
@jacobrjager10 ай бұрын
FYI: duct tape is not usually transparent and has threads embedded in it. The tape used on the door of that car looked more like clear packing tape (AKA cellophane tape).
@konciliogasco3324
10 ай бұрын
Also if there is any compromise to the paint such as a slight crack all the paint comes too body shops love ya doing this
@DanaX09
9 ай бұрын
Yeah. Definitely NOT duct tape.
@jakeqwaninne8502
4 ай бұрын
@@konciliogasco3324 body shop here, ya that looked like packing tape to me too , and ya, it's great when customers try to fix their cars, and fuck it up, just don't put silicone anything on the car, we can't always get it off,and that sucks, it causes paint and anything else for that matter , not to stick, paint jumps rite off the pannel, it was still pretty brilliant though, i'm gonna try it
@djosearth3618
3 ай бұрын
Real duct tape is adhesive backed metal like a thick tinfoil for doing duct repair work/sealing. that's why most or that (MUCH temporary/cheaper) duct tape is grey/silver. But still good catch and point, that's CLEARly packing/shipping tape ;] -with love and respect from Canada
@jakeqwaninne8502
3 ай бұрын
@@djosearth3618 it isn't really called duct tape, it was called "DUCK" tape, for it's moisture resistant properties, it was invented for the military
@jaimeeoww10 ай бұрын
Where’s the thumbnail? I watched the whole video how did i miss it
@BitSmythe10 ай бұрын
Some good tips, but that _incessant background “music” noise_ is *grating enough to remove rust and grout!*
@leemacdonald3487
22 күн бұрын
At least they didn’t have bad transcription over the whole video
@CriticalEducation4SD
22 сағат бұрын
Ha ha nice! You could sharpen a chisel with that comment
@v1antbo11 ай бұрын
The salt will destroy the screw.
@JXPLennox
10 ай бұрын
... or it attracts water and dissolves in it.
@offthebeatengrid
5 ай бұрын
And it will dry out the wood, becoming loose again before the screw goes bad.
@carolynandcocohaywood263810 ай бұрын
Amazing how easy things are when someone shows you how to do it.
@charismahornum-fries69110 ай бұрын
Fun tips that most will have forgotten about in less than a day but is highly entertaining.
@dennishowland749510 ай бұрын
It’s a great idea that people share their tips what other people
@chaplainmattsanders488410 ай бұрын
Cool ideas. Thnx for the collection. (Maybe include chapter markers in the description for quick reference?)
@slowboat602110 ай бұрын
actually had some good ideas in that. thanks for sharing
@notmyworld4411 ай бұрын
Dear friend, at 0:20 that isn't Duct Tape. That's Packaging Tape. Nevertheless, that's an amazing use of it, and Duct Tape would probably work just as well, if not even better. So thanks for the demonstration!!
@UKcomedyfan28
11 ай бұрын
I agree about it not being duct tape. Duct tape would leave a sticky residue (as would packaging tape). 12:52 is also not duct tape. It looks like electrical tape, but I could be wrong.
@rq3733
10 ай бұрын
not to mention it might remove some door paint😁
@JustAboutAnything66
10 ай бұрын
My wife said immediately, "That's packing tape!"😃
@melenynder7136
10 ай бұрын
@@UKcomedyfan28 Painter's tape
@UKcomedyfan28
10 ай бұрын
@@melenynder7136 I don't think the painter's tape would be strong enough to remove a dent in a car door.
@calipete10 ай бұрын
The music is incredibly annoying, and some of the "hacks" left me asking, "Why?" Still, enough of them were so absolutely ingenious that I'm going to take notes and begin trying them in my work life immediately. I especially liked the gear tooth repair, and the staples to fix broken plastic repair. Very cool. 👍🏻
@B_HarTz
10 ай бұрын
Ur just old and bitter and think everything is annoying … prolly
@herdHistruth10 ай бұрын
10:15 never drill a ceiling tile from the top, you might bust out excessive tile as the hole saw goes through, drill a small pilot hole through first, then drill from the underside.
@timtim2668Ай бұрын
6:25 Very smart approach to measuring and cutting a stairs steps wall skirt
@jamalbokhari247410 ай бұрын
Great video. Extremely helpful
@SteveH-TN7 ай бұрын
Thanks for sharing your hacks and tips this video.
@riverbender989811 ай бұрын
Excellent tips. Thanks.
@tinacheez145011 ай бұрын
I show these to my grandma when she falls asleep, better than coffee
@TroyQwert9 ай бұрын
Really useful hacks. At least for me, some of them... Thanks for sharing!
@tinamortensen122010 ай бұрын
Why didn't you include the thumbnail image in the hacks?
@colemyst10 ай бұрын
Once again he thumbnail idea is not shown! I can only believe that the thumbnail was a DIY of the expensive metal hinges shown at the end.
@aprildegele151010 ай бұрын
I've watched many of these videos and I can say that this episode had SO many great tips! Thanks for posting.
@djosearth3618
3 ай бұрын
I agree. they are usually loaded with at least half useless, nonsenible or even more difficult but more complex ways of doing things but this one was nearly all pure brainiac solutions. The one where the guys used a fork to hang a picture was ugly as heck if it was drywall he could have used a sewing needle at a 56-60 degree angle those little things have quite a bit of holding power and make nearly no hole. just don't use the sure thinnest inflexible ones (unless hanging something really light. Also the guy that stuck (forever RUINING the critical factory finish on the drill bit and then wasted 3 black zapstraps making more micro-plastics including that stupid cup, just to mix 1/2 cup of epoxy/resin/activator/colour was mind dumbingly stupid. Popsicle stick or two would work just fine, i've been using a bent a peice of thicker bare wire or even part of an oldmetal coat hanger, i twist them into a spiral or like a kitchen honey utensil or whisk :) Good gomment! -respect and love from Canada ;]
@pajolee6918
27 күн бұрын
The fuck video did you watch?
@genmasaotome350311 ай бұрын
2:59 increase inner diameter... is sorta true.. but it seems like an old tube was cut and the left over part is what comes out.
@MrSpartanicus
11 ай бұрын
It was, they make a saw kit to essentially grind that piece out now. Probably quicker then heating it
@user-er5mi9mr2i
10 ай бұрын
I bet it is...
@dgulssmith406311 ай бұрын
Just discovered this channel and already been through tons of vids. Content is great!
@MinhNguyen-mo5fp7 ай бұрын
Thank you 😊❤
@berniecelee506210 ай бұрын
Wow 😮 what a great video on these genius tips and tricks ! I am not a gal with a hammer BUT this came across my algorithm and I am fascinated ! This Mcgiver attribute is something I wished my hubby has …. But no , he’s a cerebral guy ….so no to using his hands. I have to hire the handyman and they are a dying breed. Can’t find any in my town cause no one wants the small jobs. It’s sad .
@emmanuelmakunzva618711 ай бұрын
amazing throughout
@royceadkins752910 ай бұрын
Imangine this other wordly tip if the wrench dont fit the nut reach for the right size wrench not a quarter 😂
@PollyHistor
10 ай бұрын
Unless you only have the one "wrong sized" wrench.
@tgeliot
4 ай бұрын
@@PollyHistor What person who owns box end wrenches but does not also own an adjustable wrench?
@PollyHistor
4 ай бұрын
@@tgeliot Fair point. Someone who's tools have been stolen, I suppose.
@GM-ww10 ай бұрын
Where is the tip displayed in the original thumbnail? Am I missing it?
@jparky1972
3 ай бұрын
That's what's called click bait. It's a home made version of the hinges at the end of the video.
@JustAboutAnything6610 ай бұрын
In my experience, these types of videos are usually full of useless hacks that either don't work, except in rare cases, or "solve" non-problems. I was surprised by this compilation. In addition to some tricks I've used for years as a carpenter and maker, there were some I'm certain will work and can't wait to try.
@saulogabrielmontanarorosa28911 ай бұрын
discovering every new thing this channel is 💯
@davidjones72384 ай бұрын
I've been working on things all my life. I've been an aircraft mechanic for 35 years. I've also seen a bunch of these kinds of videos. This is the best one I've seen. I'm saving it, I'm going to watch it a bunch of times to help remember.
@mk853010 ай бұрын
Do you have a hack that will memorize all these amazing hack's?
@tashamclean
8 ай бұрын
😂😂
@joanjackson582510 ай бұрын
I think this is the best video I have seen in a very long time! Thank you so much for posting it.
@t.b.974810 ай бұрын
No video from the first ad picture.
@misterl287511 ай бұрын
Didn’t see anything that I couldn’t live without.
@erict372810 ай бұрын
Came here to see the thumbnail explained. Watched the whole thing waiting. Clickbait
@Jesse-zk9ge11 ай бұрын
I'm sorry but I believe this is what we need to teach kids in schools that are days, so that they could be more independent and not dependent upon others to do stuff for them.✌
@ibubezi7685
11 ай бұрын
My 'problem' is..... how to remember them all?!??!?!? Could have used so many of them.... if only....
@canadian2uk
11 ай бұрын
That's what moms, dads and years of experience are for. Most of these tricks are great for those doing a task once, but impractical for continual utilization.
@JP_TaVeryMuch
10 ай бұрын
As far as I can see, they're all being brought up with the mentality of I'll get someone in to do that. Good luck earning enough, but the main problem will be the disappearance of the someones.
@djosearth3618
3 ай бұрын
That's not what the Oligarchy wants, where have you been, Switzerland?! open your eyes. wtf is summer break even for (WAS for kids to help on the farm) but these days i gaurantee you EVERY kid would rather do 7 weeks on 3 weeks off all year round then a long boring suummer vacation
@jimweisgram918511 ай бұрын
I'm curious what kind of electrical circuit is involved with the the tip of twisting wire with a drill. If that is 120v or 240v, soldering it is a bad idea. A line at that voltage, if it overheats can melt the solder. A wago connector or wire nut are safer choices.
@kentrussell4007
10 ай бұрын
It seems to me that if a circuit is carrying so much amperage that it cause a solder connection to melt then there are more serious problems than how the wires are connected at the junction box.
@laurencerilling5873
10 ай бұрын
That’s any voltage. Also, why they were twisted tight first
@mang4260
10 ай бұрын
As an electrician, i really don't recommend to follow any kind of idea this channel provides about electrical circuit. It's not this dude you will call when his "tricks" will broke, and you will have to pay a full time dude like me, to found the problem, and repair it, then complain about why the bill is high, when you can avoid it by not doing those "ideas".
@Tipperary75710 ай бұрын
Amazing stuff. Salt might degrade with moisture.
@TheDanno210
9 ай бұрын
And the salt will begin eating any metal it’s exposed to the moment it has become exposed to it.
@2tart8 ай бұрын
Some of these “tips” are deadly 😅
@laurencerilling587310 ай бұрын
Use a worn out saw blade… Uses a new blade
@sylhomeo635110 ай бұрын
Ingenious!
@dennwahh5 ай бұрын
This was a good one with lots of new tips. Hey if you can, I’d like to know what those cabinet door hinges are called. if you know i would greatly appreciate if you could let me know. Thx
@ThailandTerry
4 ай бұрын
@dennwahh it is on the screen top left. Lamp Monoflat Lin-X hinge. Lin-X450. There is also other names bottom left and right maybe manufacturer / distributor ? at 17.18 time in video.
@timtim2668Ай бұрын
15:54 that's awesome I love the Self Feeding Camp Fire 🔥
@themikeymikechannel294711 ай бұрын
Anyone see the bulb in the beginning - the top SHELL was lite up b4 he put it back on. LOL LMAO
@EmptyZoo393
Ай бұрын
Yeah, I was looking at that and it seemed like a bad idea. Pencil lead might be somewhat conductive, but when you try to put a couple of watts through it it's just going to light up in a different way. Congrats, your busted LED bulb just became a burned LED bulb.
@AnneLuchyshyn8 ай бұрын
Where do you obtain the PVC holders for hoses or tools?
@daledickey8400
6 ай бұрын
Plumbing supplies, pvc pipes glued together to match configuration of your drill. Most building/Plumbing suppliers can help pick the parts by showing video or print a photo from the video.
@timtim2668Ай бұрын
10:06 WOW 🤯 That's Insane! How Simple and effective that technique was for where to drill a hole for the extending Water Pipe for the Fire extinguish system
@oscaramerica94779 ай бұрын
Very interesting & so smart, thanks 4 add
@herdHistruth10 ай бұрын
8:06 until the wrench binds on the bit and you have a helicopter to deal with.
@Terence_x
3 ай бұрын
🤣🤣👍👍
@akhi9310 ай бұрын
GENIUS
@prestow10 ай бұрын
15:16 Great idea. To complete it make a hole so the fire won't catch wind and so the burnt materials can go down, allowing the other logs to gently roll down
@Nellosphere10 ай бұрын
Big fan of the gear fixing tip with wax casting.
@shane8915
10 ай бұрын
Yep! That one was instantly logged to memory. I still wouldn't do that fix unless it was an emergency. Plastic gear replacements are cheap. That is... if you can still get them. Since my career is in maintenance, I know that sometimes you just can't get the part. Usually, if I can't get the gear, I'll have one made out aluminum. That's what I do for anything that I personally own. But, that was definitely slick. Will certainly get you out of a bind in an emergency.
@alibro751211 ай бұрын
Apart from the narrator not having a clue what he's talking about these tips are great.
@reanaldrogan985211 ай бұрын
Jeez, that was insane! you earned my like and subs
@newt201010 ай бұрын
Do you know what duct tape is? Just wondering, as the car door repair was done, using packing tape.
@hewlejr9 ай бұрын
Bingeing this so hard!!
@gilldanier412910 ай бұрын
All these are great, but I forget almost instantly.
@Terence_x
3 ай бұрын
🤣👍
@danielvicars515
Ай бұрын
Screenshots help...
@utube18182 ай бұрын
8:07 The wrench is not to stabilize the tool it is to indicate when your drill perfectly level, a metal washer will also do the same job.
@georgejones35265 ай бұрын
I just knew the clickbait thumbnail wouldn’t be in the video, and I was right.
@moonverse50647 ай бұрын
impressive video
@shylfer535111 ай бұрын
What is the hose hanger called?! I need that in my life!
@Karbonthirteen
10 ай бұрын
If you find out please let me know. I’m searching the comments to see if someone made a reply with the pvc hose holder information. Thanks
@pjaypender100910 ай бұрын
The tape used to pull out that dent was not duct tape, it was packing tape.
@mikepalmer2219
10 ай бұрын
Ya I was like omg don’t put duct tape on your painted car!!!! Lol. Then I seen it was packing tape. Lol.
@F1DesignUS11 ай бұрын
OK....picture and fork is a good one
@kfcmalaysia55809 ай бұрын
Clever !!!!
@cholman424810 ай бұрын
The fork hanging picture thing...genius!
@utubeape2 ай бұрын
some very good tips here
@traynor3339 ай бұрын
Anyone know the song title used at the beginning of this video? It does not come up on the music listing in the description.
@Gase4kafe6 ай бұрын
Salt with steel - very smart...😂
@brianchamberlin153911 ай бұрын
Just ordered an extra large leaky bucket off Amazon.
@christopherleander9068
11 ай бұрын
😂
@maureentuohy867210 ай бұрын
And this is why I love KZread.
@bigrednation828 ай бұрын
What back ground music is playing ? I like that song 🎵!! What’s the name ? At the beginning
@mattgabbard9088
7 ай бұрын
It's called 🤢🤢🤢🤢 by the band 🤮🤮🤮🤮
@OldAndGettingOlder2 ай бұрын
The monoflat hinge is just what I need for an upcoming kitchen remodel. I want a cabinet that can be left open. I didn't want to use a sliding door or roll up.
@TalkingHands30810 ай бұрын
0:17 "Don't underestimate the hidden power of duct tape" *shows someone using packing tape* 12:53 "It's just a simple tray made of duct tape" *shows someone using painter's tape*
@boris9305
10 ай бұрын
He def does not know what duct tape is
@TalkingHands308
10 ай бұрын
@@boris9305 Or he just thinks every kind of tape is duct tape, lol
@djosearth3618
3 ай бұрын
Haha nice you caught those too eh ;]
@djosearth3618
3 ай бұрын
@@TalkingHands308Funny thing is that real duct tape is actually metal, at least here in Canada. That tape with the reinforced strings through it is usually silver and was a cheaper TEMPORARY replacement for real adhesive backed metal duct work tape. Guess it's another 3m invention like post it notes were originally supposed to be used as bookmarks but the manager wrote his rejection note on it and sent it back and between the mgr the inner mail delivery and the R&D dept someone had a eureaka moment. Bonus: Inventor didn't even get a bonus, but that's nothing comparede to Dyson Inc. stealing and patenting all those recent engineering students ideas (not sure who thought of the sideways fan in the base BUT i KNOW it was Dyson that decided to charge $600 for it ;] - much love and respect from Canada
@TalkingHands308
3 ай бұрын
@@djosearth3618 Yah, if you have a great idea, don't trust it with anyone, patent it first, lol.
@lylestavast765211 ай бұрын
using that coin to fill the gap beween wrench and flat is probably only good for a ... wait for it ... quarter turn or so...
@mikepalmer2219
10 ай бұрын
Rofl
@CharlesKeyz
10 ай бұрын
🎉😂
@42JEMAR641
10 ай бұрын
And BAD for the heat outside 😞
@steveunderhill5935
10 ай бұрын
Dad approved
@socialpsycho
10 ай бұрын
🤣☝🏻
@cbpuzzle10 ай бұрын
That pipe balloon is GENIUS. They charge a fortune for those water stop tools.
@tgeliot
4 ай бұрын
Or use a wad of bread.
@jeremiahyeo586310 ай бұрын
“…it is possible to lift a manhole cover without a special lifter “ (7:00) - Said the guy who used a special lifter to lift up the manhole cover… That special lifter being a pick axe or a Mattock, And a large wooden dowel or a baseball bat.
@leknarfs7 ай бұрын
Hey, the fix at 2:15, a ballon, some wire, A TIRE VALVE STEM, and a pump!
@timtim2668Ай бұрын
4:33 VERY GOOD IDEA💡 He made a Homemade Electric Caulking Gun
@sig605610 ай бұрын
Hanging a wrench on a quickly spinning drill is not something i ever see myself doing.
@Terence_x
3 ай бұрын
😂😂👍👍😂😂
@FoxToyBoy10 ай бұрын
Z stacją dokujacą Ultra Dock SD20F82750 oraz monitorem iiyama GB3466WQSU działa spoko. Dodatkowo 2 dyski, systemowy M.2 TS512GMTS430S oraz sata 4GB na dane. Daje radę do net, media, lekkie gry. Fakt W11 nie poleci ale u mnie ma dożywocie. (Dźwiga rozdzielczość 3440×1440 na dwóch monitorach, łącznie 3 ekrany - przylemnie się pracuje)
@chrisbaldwin517010 ай бұрын
What was that last hinge I need it in my life
@mjd_double-ya39047 ай бұрын
Anyone who can sit through this is either in a coma or trying to induce REM. 1 minute of this was enough to bail out.
@danielvicars515
Ай бұрын
Turn off the sound and watch at 2x speed. Pause and screenshot good ones. Store screenshots in 'Hacks & Tops' file. Review often.
@annsdecor98312 ай бұрын
What is the tool called that is holding up the hose and the extension cord, please? It's at 16:20 in the video. Also, where can I purchase it please?
@newt201010 ай бұрын
Increase the inner diameter of PVC?? Did you watch the same video that you narrated? He was removing the price of the old pipe from a previous connection. Making for a new piece, or T or just a repair. C'mon.........watch your. video before you comment. Yes, he did increase the inner dimeter, but that is not what was really going on. It was a repair
@juliettelynne586110 ай бұрын
But…but…but…it’s so much fun doing things the hard way!! 🙈
@herdHistruth10 ай бұрын
7:33 you can get a rawl plug out of the wall by putting a rawl screw in partway and pulling the screw with a pliers or hammer 🔨
@tgeliot
4 ай бұрын
Just put something between the hammer and the wall to spread the load so you don't make a dent in the wall.
@herdHistruth
4 ай бұрын
@@tgeliot good point, I'm used to masonry situations
@herdHistruth
4 ай бұрын
@@tgeliot ironically, before I was an electrician I insulated houses where we took some siding off with a wedge tool and a tapers knife behind it to protect siding underneath the wedge.
@rinskegemen3678Ай бұрын
That music is torture!
@zbigniewczaykowski5147 ай бұрын
Old saw blade, that's a brand new saw blade that's never been used with all of its teeth intact, a 60 teeth blade like that is about £50.
@mjhepburn1110 ай бұрын
That fork trick for hanging pictures will come in handy.
@jolkraeremeark6949
4 ай бұрын
Yeah, if I can remember that....
@dexternrooks121010 ай бұрын
How did the led light bulb thing work?
@TheDanno210
9 ай бұрын
It’s magic ✨🪄 💡 ⚡️✨ 🤷🏻♂️
@danielvicars515
Ай бұрын
Graphite in the 'lead' of the pencil conducts electricity between the contacts of the burned-out LED, bypassing the faulty one and completing the circuit.
@moboutmen10 ай бұрын
You had me at the fork.
@jessicadunne783811 ай бұрын
Cool!!
@iteerrex816611 ай бұрын
This one 2:44 is to remove the glued cut off part.
@Terence_x
3 ай бұрын
🤣👍
@stacywilson33749 ай бұрын
the cabinet hinges are about 200 dollars for a single door set- love the concept but that's a lot for a set of 2 hinges.....
@maximus181111 ай бұрын
Love, love, love you all! Can't wait for your next video. I've actually had situations similar to some of these and had several "Brain Farts" trying to figure out how to do a job and started laughing that I got some done exactly like you showed. My husband was amazed that I could troubleshoot it before he did and got it done. His response was "Who says girls can't figure it out?" 😅😂🤪🙋♀️🥰 Keep showing your videos, Thanks😁
@Terence_x
3 ай бұрын
🤣👍@@karlwithak.
@herdHistruth10 ай бұрын
10:00 you can do the same thing by making a circle with your index finger and your thumb with the nut in the middle
Пікірлер: 449
Don't use salt on a screw hole that will eventually corrode the screw and cause it to let go, Use a wood pin {Toothpicks/golf tee/spoon handle/etc.} if want to use dust use saw dust and glue.
@jeffbuck2624
10 ай бұрын
Yeah... and if there is any chance of it ever getting wet, the corrosion will be terrible, but the salt and the screw's hold will be gone.
@user-cq6km9vq2m
10 ай бұрын
Getting screwed does leave one salty, though. Jus' sayin'
@randykiessig3365
10 ай бұрын
@@user-cq6km9vq2m You have a twisted sense of humor.
@maximus1811
9 ай бұрын
EXACTLY, TOOTHPICKS WORK PERFECTLY. 👩🤗
@djosearth3618
3 ай бұрын
that's a good point i forgot about that one, that was a a very stupid one but among only about 3-4 not the normal 50-100% :). Ya everyone should know to use splits of scrap wood or rounded up used paper or nearly any inorganic trash really just not salt I use dried little twigs alot but never toothpicks (anymore), i'm trying to be more ecologically concious but not too ppreachy sorry if i came off that way, atleast i'm not using a fork to hang a little picture hehe (sewing needles sometimes work great for that tho) w love and respect from Canada!
3:00 that's not to "increase the inner diameter" it's to get a broken pipe out of the coupling
It’s already bad to steal other people videos to create a click bait, the guy commenting half the time doesn’t even understand what the trick is actually for 😂
@rosebud961
4 ай бұрын
I really don't even like his voice either. And I like for them to explain what and why and how whatever it is they are doing, ya know what I mean.
@AimeeAimee444
2 ай бұрын
How about the mosquito singing in the background! 😂🤣🤣
FYI: duct tape is not usually transparent and has threads embedded in it. The tape used on the door of that car looked more like clear packing tape (AKA cellophane tape).
@konciliogasco3324
10 ай бұрын
Also if there is any compromise to the paint such as a slight crack all the paint comes too body shops love ya doing this
@DanaX09
9 ай бұрын
Yeah. Definitely NOT duct tape.
@jakeqwaninne8502
4 ай бұрын
@@konciliogasco3324 body shop here, ya that looked like packing tape to me too , and ya, it's great when customers try to fix their cars, and fuck it up, just don't put silicone anything on the car, we can't always get it off,and that sucks, it causes paint and anything else for that matter , not to stick, paint jumps rite off the pannel, it was still pretty brilliant though, i'm gonna try it
@djosearth3618
3 ай бұрын
Real duct tape is adhesive backed metal like a thick tinfoil for doing duct repair work/sealing. that's why most or that (MUCH temporary/cheaper) duct tape is grey/silver. But still good catch and point, that's CLEARly packing/shipping tape ;] -with love and respect from Canada
@jakeqwaninne8502
3 ай бұрын
@@djosearth3618 it isn't really called duct tape, it was called "DUCK" tape, for it's moisture resistant properties, it was invented for the military
Where’s the thumbnail? I watched the whole video how did i miss it
Some good tips, but that _incessant background “music” noise_ is *grating enough to remove rust and grout!*
@leemacdonald3487
22 күн бұрын
At least they didn’t have bad transcription over the whole video
@CriticalEducation4SD
22 сағат бұрын
Ha ha nice! You could sharpen a chisel with that comment
The salt will destroy the screw.
@JXPLennox
10 ай бұрын
... or it attracts water and dissolves in it.
@offthebeatengrid
5 ай бұрын
And it will dry out the wood, becoming loose again before the screw goes bad.
Amazing how easy things are when someone shows you how to do it.
Fun tips that most will have forgotten about in less than a day but is highly entertaining.
It’s a great idea that people share their tips what other people
Cool ideas. Thnx for the collection. (Maybe include chapter markers in the description for quick reference?)
actually had some good ideas in that. thanks for sharing
Dear friend, at 0:20 that isn't Duct Tape. That's Packaging Tape. Nevertheless, that's an amazing use of it, and Duct Tape would probably work just as well, if not even better. So thanks for the demonstration!!
@UKcomedyfan28
11 ай бұрын
I agree about it not being duct tape. Duct tape would leave a sticky residue (as would packaging tape). 12:52 is also not duct tape. It looks like electrical tape, but I could be wrong.
@rq3733
10 ай бұрын
not to mention it might remove some door paint😁
@JustAboutAnything66
10 ай бұрын
My wife said immediately, "That's packing tape!"😃
@melenynder7136
10 ай бұрын
@@UKcomedyfan28 Painter's tape
@UKcomedyfan28
10 ай бұрын
@@melenynder7136 I don't think the painter's tape would be strong enough to remove a dent in a car door.
The music is incredibly annoying, and some of the "hacks" left me asking, "Why?" Still, enough of them were so absolutely ingenious that I'm going to take notes and begin trying them in my work life immediately. I especially liked the gear tooth repair, and the staples to fix broken plastic repair. Very cool. 👍🏻
@B_HarTz
10 ай бұрын
Ur just old and bitter and think everything is annoying … prolly
10:15 never drill a ceiling tile from the top, you might bust out excessive tile as the hole saw goes through, drill a small pilot hole through first, then drill from the underside.
6:25 Very smart approach to measuring and cutting a stairs steps wall skirt
Great video. Extremely helpful
Thanks for sharing your hacks and tips this video.
Excellent tips. Thanks.
I show these to my grandma when she falls asleep, better than coffee
Really useful hacks. At least for me, some of them... Thanks for sharing!
Why didn't you include the thumbnail image in the hacks?
Once again he thumbnail idea is not shown! I can only believe that the thumbnail was a DIY of the expensive metal hinges shown at the end.
I've watched many of these videos and I can say that this episode had SO many great tips! Thanks for posting.
@djosearth3618
3 ай бұрын
I agree. they are usually loaded with at least half useless, nonsenible or even more difficult but more complex ways of doing things but this one was nearly all pure brainiac solutions. The one where the guys used a fork to hang a picture was ugly as heck if it was drywall he could have used a sewing needle at a 56-60 degree angle those little things have quite a bit of holding power and make nearly no hole. just don't use the sure thinnest inflexible ones (unless hanging something really light. Also the guy that stuck (forever RUINING the critical factory finish on the drill bit and then wasted 3 black zapstraps making more micro-plastics including that stupid cup, just to mix 1/2 cup of epoxy/resin/activator/colour was mind dumbingly stupid. Popsicle stick or two would work just fine, i've been using a bent a peice of thicker bare wire or even part of an oldmetal coat hanger, i twist them into a spiral or like a kitchen honey utensil or whisk :) Good gomment! -respect and love from Canada ;]
@pajolee6918
27 күн бұрын
The fuck video did you watch?
2:59 increase inner diameter... is sorta true.. but it seems like an old tube was cut and the left over part is what comes out.
@MrSpartanicus
11 ай бұрын
It was, they make a saw kit to essentially grind that piece out now. Probably quicker then heating it
@user-er5mi9mr2i
10 ай бұрын
I bet it is...
Just discovered this channel and already been through tons of vids. Content is great!
Thank you 😊❤
Wow 😮 what a great video on these genius tips and tricks ! I am not a gal with a hammer BUT this came across my algorithm and I am fascinated ! This Mcgiver attribute is something I wished my hubby has …. But no , he’s a cerebral guy ….so no to using his hands. I have to hire the handyman and they are a dying breed. Can’t find any in my town cause no one wants the small jobs. It’s sad .
amazing throughout
Imangine this other wordly tip if the wrench dont fit the nut reach for the right size wrench not a quarter 😂
@PollyHistor
10 ай бұрын
Unless you only have the one "wrong sized" wrench.
@tgeliot
4 ай бұрын
@@PollyHistor What person who owns box end wrenches but does not also own an adjustable wrench?
@PollyHistor
4 ай бұрын
@@tgeliot Fair point. Someone who's tools have been stolen, I suppose.
Where is the tip displayed in the original thumbnail? Am I missing it?
@jparky1972
3 ай бұрын
That's what's called click bait. It's a home made version of the hinges at the end of the video.
In my experience, these types of videos are usually full of useless hacks that either don't work, except in rare cases, or "solve" non-problems. I was surprised by this compilation. In addition to some tricks I've used for years as a carpenter and maker, there were some I'm certain will work and can't wait to try.
discovering every new thing this channel is 💯
I've been working on things all my life. I've been an aircraft mechanic for 35 years. I've also seen a bunch of these kinds of videos. This is the best one I've seen. I'm saving it, I'm going to watch it a bunch of times to help remember.
Do you have a hack that will memorize all these amazing hack's?
@tashamclean
8 ай бұрын
😂😂
I think this is the best video I have seen in a very long time! Thank you so much for posting it.
No video from the first ad picture.
Didn’t see anything that I couldn’t live without.
Came here to see the thumbnail explained. Watched the whole thing waiting. Clickbait
I'm sorry but I believe this is what we need to teach kids in schools that are days, so that they could be more independent and not dependent upon others to do stuff for them.✌
@ibubezi7685
11 ай бұрын
My 'problem' is..... how to remember them all?!??!?!? Could have used so many of them.... if only....
@canadian2uk
11 ай бұрын
That's what moms, dads and years of experience are for. Most of these tricks are great for those doing a task once, but impractical for continual utilization.
@JP_TaVeryMuch
10 ай бұрын
As far as I can see, they're all being brought up with the mentality of I'll get someone in to do that. Good luck earning enough, but the main problem will be the disappearance of the someones.
@djosearth3618
3 ай бұрын
That's not what the Oligarchy wants, where have you been, Switzerland?! open your eyes. wtf is summer break even for (WAS for kids to help on the farm) but these days i gaurantee you EVERY kid would rather do 7 weeks on 3 weeks off all year round then a long boring suummer vacation
I'm curious what kind of electrical circuit is involved with the the tip of twisting wire with a drill. If that is 120v or 240v, soldering it is a bad idea. A line at that voltage, if it overheats can melt the solder. A wago connector or wire nut are safer choices.
@kentrussell4007
10 ай бұрын
It seems to me that if a circuit is carrying so much amperage that it cause a solder connection to melt then there are more serious problems than how the wires are connected at the junction box.
@laurencerilling5873
10 ай бұрын
That’s any voltage. Also, why they were twisted tight first
@mang4260
10 ай бұрын
As an electrician, i really don't recommend to follow any kind of idea this channel provides about electrical circuit. It's not this dude you will call when his "tricks" will broke, and you will have to pay a full time dude like me, to found the problem, and repair it, then complain about why the bill is high, when you can avoid it by not doing those "ideas".
Amazing stuff. Salt might degrade with moisture.
@TheDanno210
9 ай бұрын
And the salt will begin eating any metal it’s exposed to the moment it has become exposed to it.
Some of these “tips” are deadly 😅
Use a worn out saw blade… Uses a new blade
Ingenious!
This was a good one with lots of new tips. Hey if you can, I’d like to know what those cabinet door hinges are called. if you know i would greatly appreciate if you could let me know. Thx
@ThailandTerry
4 ай бұрын
@dennwahh it is on the screen top left. Lamp Monoflat Lin-X hinge. Lin-X450. There is also other names bottom left and right maybe manufacturer / distributor ? at 17.18 time in video.
15:54 that's awesome I love the Self Feeding Camp Fire 🔥
Anyone see the bulb in the beginning - the top SHELL was lite up b4 he put it back on. LOL LMAO
@EmptyZoo393
Ай бұрын
Yeah, I was looking at that and it seemed like a bad idea. Pencil lead might be somewhat conductive, but when you try to put a couple of watts through it it's just going to light up in a different way. Congrats, your busted LED bulb just became a burned LED bulb.
Where do you obtain the PVC holders for hoses or tools?
@daledickey8400
6 ай бұрын
Plumbing supplies, pvc pipes glued together to match configuration of your drill. Most building/Plumbing suppliers can help pick the parts by showing video or print a photo from the video.
10:06 WOW 🤯 That's Insane! How Simple and effective that technique was for where to drill a hole for the extending Water Pipe for the Fire extinguish system
Very interesting & so smart, thanks 4 add
8:06 until the wrench binds on the bit and you have a helicopter to deal with.
@Terence_x
3 ай бұрын
🤣🤣👍👍
GENIUS
15:16 Great idea. To complete it make a hole so the fire won't catch wind and so the burnt materials can go down, allowing the other logs to gently roll down
Big fan of the gear fixing tip with wax casting.
@shane8915
10 ай бұрын
Yep! That one was instantly logged to memory. I still wouldn't do that fix unless it was an emergency. Plastic gear replacements are cheap. That is... if you can still get them. Since my career is in maintenance, I know that sometimes you just can't get the part. Usually, if I can't get the gear, I'll have one made out aluminum. That's what I do for anything that I personally own. But, that was definitely slick. Will certainly get you out of a bind in an emergency.
Apart from the narrator not having a clue what he's talking about these tips are great.
Jeez, that was insane! you earned my like and subs
Do you know what duct tape is? Just wondering, as the car door repair was done, using packing tape.
Bingeing this so hard!!
All these are great, but I forget almost instantly.
@Terence_x
3 ай бұрын
🤣👍
@danielvicars515
Ай бұрын
Screenshots help...
8:07 The wrench is not to stabilize the tool it is to indicate when your drill perfectly level, a metal washer will also do the same job.
I just knew the clickbait thumbnail wouldn’t be in the video, and I was right.
impressive video
What is the hose hanger called?! I need that in my life!
@Karbonthirteen
10 ай бұрын
If you find out please let me know. I’m searching the comments to see if someone made a reply with the pvc hose holder information. Thanks
The tape used to pull out that dent was not duct tape, it was packing tape.
@mikepalmer2219
10 ай бұрын
Ya I was like omg don’t put duct tape on your painted car!!!! Lol. Then I seen it was packing tape. Lol.
OK....picture and fork is a good one
Clever !!!!
The fork hanging picture thing...genius!
some very good tips here
Anyone know the song title used at the beginning of this video? It does not come up on the music listing in the description.
Salt with steel - very smart...😂
Just ordered an extra large leaky bucket off Amazon.
@christopherleander9068
11 ай бұрын
😂
And this is why I love KZread.
What back ground music is playing ? I like that song 🎵!! What’s the name ? At the beginning
@mattgabbard9088
7 ай бұрын
It's called 🤢🤢🤢🤢 by the band 🤮🤮🤮🤮
The monoflat hinge is just what I need for an upcoming kitchen remodel. I want a cabinet that can be left open. I didn't want to use a sliding door or roll up.
0:17 "Don't underestimate the hidden power of duct tape" *shows someone using packing tape* 12:53 "It's just a simple tray made of duct tape" *shows someone using painter's tape*
@boris9305
10 ай бұрын
He def does not know what duct tape is
@TalkingHands308
10 ай бұрын
@@boris9305 Or he just thinks every kind of tape is duct tape, lol
@djosearth3618
3 ай бұрын
Haha nice you caught those too eh ;]
@djosearth3618
3 ай бұрын
@@TalkingHands308Funny thing is that real duct tape is actually metal, at least here in Canada. That tape with the reinforced strings through it is usually silver and was a cheaper TEMPORARY replacement for real adhesive backed metal duct work tape. Guess it's another 3m invention like post it notes were originally supposed to be used as bookmarks but the manager wrote his rejection note on it and sent it back and between the mgr the inner mail delivery and the R&D dept someone had a eureaka moment. Bonus: Inventor didn't even get a bonus, but that's nothing comparede to Dyson Inc. stealing and patenting all those recent engineering students ideas (not sure who thought of the sideways fan in the base BUT i KNOW it was Dyson that decided to charge $600 for it ;] - much love and respect from Canada
@TalkingHands308
3 ай бұрын
@@djosearth3618 Yah, if you have a great idea, don't trust it with anyone, patent it first, lol.
using that coin to fill the gap beween wrench and flat is probably only good for a ... wait for it ... quarter turn or so...
@mikepalmer2219
10 ай бұрын
Rofl
@CharlesKeyz
10 ай бұрын
🎉😂
@42JEMAR641
10 ай бұрын
And BAD for the heat outside 😞
@steveunderhill5935
10 ай бұрын
Dad approved
@socialpsycho
10 ай бұрын
🤣☝🏻
That pipe balloon is GENIUS. They charge a fortune for those water stop tools.
@tgeliot
4 ай бұрын
Or use a wad of bread.
“…it is possible to lift a manhole cover without a special lifter “ (7:00) - Said the guy who used a special lifter to lift up the manhole cover… That special lifter being a pick axe or a Mattock, And a large wooden dowel or a baseball bat.
Hey, the fix at 2:15, a ballon, some wire, A TIRE VALVE STEM, and a pump!
4:33 VERY GOOD IDEA💡 He made a Homemade Electric Caulking Gun
Hanging a wrench on a quickly spinning drill is not something i ever see myself doing.
@Terence_x
3 ай бұрын
😂😂👍👍😂😂
Z stacją dokujacą Ultra Dock SD20F82750 oraz monitorem iiyama GB3466WQSU działa spoko. Dodatkowo 2 dyski, systemowy M.2 TS512GMTS430S oraz sata 4GB na dane. Daje radę do net, media, lekkie gry. Fakt W11 nie poleci ale u mnie ma dożywocie. (Dźwiga rozdzielczość 3440×1440 na dwóch monitorach, łącznie 3 ekrany - przylemnie się pracuje)
What was that last hinge I need it in my life
Anyone who can sit through this is either in a coma or trying to induce REM. 1 minute of this was enough to bail out.
@danielvicars515
Ай бұрын
Turn off the sound and watch at 2x speed. Pause and screenshot good ones. Store screenshots in 'Hacks & Tops' file. Review often.
What is the tool called that is holding up the hose and the extension cord, please? It's at 16:20 in the video. Also, where can I purchase it please?
Increase the inner diameter of PVC?? Did you watch the same video that you narrated? He was removing the price of the old pipe from a previous connection. Making for a new piece, or T or just a repair. C'mon.........watch your. video before you comment. Yes, he did increase the inner dimeter, but that is not what was really going on. It was a repair
But…but…but…it’s so much fun doing things the hard way!! 🙈
7:33 you can get a rawl plug out of the wall by putting a rawl screw in partway and pulling the screw with a pliers or hammer 🔨
@tgeliot
4 ай бұрын
Just put something between the hammer and the wall to spread the load so you don't make a dent in the wall.
@herdHistruth
4 ай бұрын
@@tgeliot good point, I'm used to masonry situations
@herdHistruth
4 ай бұрын
@@tgeliot ironically, before I was an electrician I insulated houses where we took some siding off with a wedge tool and a tapers knife behind it to protect siding underneath the wedge.
That music is torture!
Old saw blade, that's a brand new saw blade that's never been used with all of its teeth intact, a 60 teeth blade like that is about £50.
That fork trick for hanging pictures will come in handy.
@jolkraeremeark6949
4 ай бұрын
Yeah, if I can remember that....
How did the led light bulb thing work?
@TheDanno210
9 ай бұрын
It’s magic ✨🪄 💡 ⚡️✨ 🤷🏻♂️
@danielvicars515
Ай бұрын
Graphite in the 'lead' of the pencil conducts electricity between the contacts of the burned-out LED, bypassing the faulty one and completing the circuit.
You had me at the fork.
Cool!!
This one 2:44 is to remove the glued cut off part.
@Terence_x
3 ай бұрын
🤣👍
the cabinet hinges are about 200 dollars for a single door set- love the concept but that's a lot for a set of 2 hinges.....
Love, love, love you all! Can't wait for your next video. I've actually had situations similar to some of these and had several "Brain Farts" trying to figure out how to do a job and started laughing that I got some done exactly like you showed. My husband was amazed that I could troubleshoot it before he did and got it done. His response was "Who says girls can't figure it out?" 😅😂🤪🙋♀️🥰 Keep showing your videos, Thanks😁
@Terence_x
3 ай бұрын
🤣👍@@karlwithak.
10:00 you can do the same thing by making a circle with your index finger and your thumb with the nut in the middle
What is the music track starting at 6:00 min?