Handy Johnny
Ғылым және технология
Melted, delaminated or faded LCD display can be saved!
Repair spoilt, faulty or faded LCD display tutorial
Repair LCD display of a function generator!
For more of this videos, pls help like and share!
Leave any comments for me to follow up too!
✅KZread SUBSCRIBE !! kzread.info/dron/WSe.html...
✅FACEBOOK PAGE: Fb.me/HANDYJOHNNYPAGE
Thanks!
Hope you like it!
Пікірлер: 76
THE MUSIIIC KILLS MY BRAINCELLS.
I agree with Nigel Macleod You need to dump the music.
@markfisher7962
Жыл бұрын
... and the robot narration. "Del-a-deem-i-ted"? Try "de-LAM-ih-na-ted."
Great video. You can lower the volume and turn on Closed Captions..
Good video, but music is extremely irritating
@eoutro9049
10 ай бұрын
Indeed, sir... indeed
@raykkonenmichall4057
5 ай бұрын
Ainda bem que meu celular tem função "baixar volume".
Good work buddy, nice fix. 👍🏽👍🏽Thanks for sharing the repair, appreciated.
Irritating music with good informative video
knock off the music - sounds like something you would hear in the jungle
@REXXSEVEN
Жыл бұрын
No...if you heard something in the jungle, they would be playing those Congo drums. Lol.
they should edit this video again, but without music, i could turn the volume down, but i would not hear the steps
@samuelnabarro3392
2 ай бұрын
You can turn down the volume and turn on Closed Captions [cc]
Wow craftsmanship 👌🙏🏻🇮🇳
The video would be so much better without that psychodelic music..
Amazing and very informative video
Thanks for the post. Learnt a lot. Best wishes :)
the san andreas meme at the end caught me way off guard ngl
Nice choice of music. Did you make this track? Reminds me a bit of 1990's minimal techno. I guess by looking now at other comments about the music is they are all big Katy Perry fans.
Where can we get the polarised sheet? Please provide the link for purchase. Very informative video and it will be useful to many who are having the same problem and this video is the solution.
well done 👌💐
I am trying to understand why the paper is needed? Would just replacing the lcd screen with the adhesive one like you did be enough? Or is the paper used to just told the screen in place along with the adhesive?
Can this be done to repair a 10-inch SuperTwist reflective LCD in my NEC MultiSpeed computer?
Is that film you used similar to car window tint?
Sangat membantu sekali, terimakasih, Itu polarizernya pakai polarizer negatif apa positif boos?
very nice product, hope to have more talks with you, cause we factory could customize and bulk produce your orders. we support small order as well.
Keep the music soft like in the background? Teaching is lost when music is loud. What glue is used if I don't have it on the polarizer?
@yaowen12
Жыл бұрын
The film comes with the adhesive
@gartheligon140
Жыл бұрын
@@yaowen12 Thank you.
Hi How much the angle of polarization is important? Or do I need to rotate th polarizer until I get the right reading on the display? Many thanx!
@patrickcardon1643
5 ай бұрын
Depending on the angle you can get black signs on a transparent background or transparent signs on a black background. You need to check before cutting it. So best check before taking the LCD out of the unit
Very instructive thanks I have one but with big black stain on the top like a liquid leak It can be fixed?
@radius.indrawan
2 жыл бұрын
i also have the same problem.
@yaowen12
2 жыл бұрын
Any photo to share?
@lindsayjones421
2 жыл бұрын
I also have the same problem. Half the screen on my cordless air pump has become black.
@REXXSEVEN
Жыл бұрын
@@lindsayjones421 Everyone, look up these search terms on KZread: LCD burn LCD bleed LCD cancer LCD dead pixels ..... The videos you find may help explain how this happens, and some methods you can try. Make sure to read the comments before trying them, because you will be trying these methods at your own risk (some methods may work, some may not, some can make a problem worse. So read the comments carefully). (Shadow banned comment....will reattempt)
@REXXSEVEN
Жыл бұрын
Look up these terms: LCD burn LCD bleed LCD cancer LCD dead pixels ..... The vids you find may help explain how this happens, and some methods you can try. Make sure to read the comments before trying them, because you will be trying these methods at your own risk (some methods may work, some may not, some can make a problem worse. So read the comments carefully).
Hello, maybe you can help me, I replaced the damaged lcd display of my Boafeng UV-6R. When I install a new lcd, it has a high contrast, only when the battery is low does it allow reading. Thanks
did you have two layers of polarizer film on originally. It still looks tinted after you scraped off a layer. I did mine and had two layers and the glass lcd was clear after scraping
@2tallB
Жыл бұрын
Didn’t he say at the beginning that there was polarizer film on both sides of the glass?
@REXXSEVEN
Жыл бұрын
He said that there was polarization film on both sides of the glass, but the one on the back side is the one that is more likely to fail so he tried replacing that first and it fixed the problem.
silver vynil for the back might have been better
Just using chrome painted TV polarizer as a backlight
Cristal líquido como se fabrica
Is that polarized film a special material? Is it easily available? Can it be substituted with other material?
@Peter_A1466
9 ай бұрын
You need a polarizing film, it can not be substituted with something else.
@Subgunman
9 ай бұрын
@@Peter_A1466and a source for the polarizing film for the LCD display???
@logothaironsides2942
2 ай бұрын
@@Subgunman you can use stuff you can buy for telephone screens. Just look for polarising film.
Spesification the polariz, please. 90°?
Scrap the music.
The repetitious background music caused me to turn off the sound, and just turn it on where I had to in order to figure out what was going on.
Not clear if you used the adhesive side to adhere down!
@RXSVN_2
Жыл бұрын
First you will need to determine If the polarization filter needs to be replaced on the front of the LCD glass screen or the back of the screen. In some cases it is both, but most of the time, the back filter is the one that goes bad first. (According to the video). Now Listen at 9:28 and at 11:16 In this example, The adhesive side is to stick to the back of the glass LCD screen. BUT if you want, you can use clear tape instead to hold the lcd glass, the polarization film and the white paper backing together. If you use clear tape option, then you do not need to expose the adhesive on the polarization filter. Note: Even though using the adhesive on the polarization filter to stick to the back of the glass LCD screen is the preferred method for some people, you may find it helpful to use the clear tape instead so that you can test if the display is working with the polarization film replaced. If you find that it's working now, then you can go ahead and apply the adhesive side to the LCD glass. Hope this helps. If you decide to apply the adhesive to the glass screen, you have to be careful not to trap any dirt, dust, lint, or air bubbles. Be very careful.
Yeeeeeeeeeehaaaaaaaaw
So, whats the actual cause of this? Is it simply the polarizing layer coming slightly unstuck?
@juanmanuelguerrero4924
Жыл бұрын
El calor mancha el fondo gris por decirlo se tuestan algunas partes y luego se ven mal
@izzzzzz6
5 ай бұрын
@@juanmanuelguerrero4924 ¿Esto proviene de la luz solar directa o del calor de la unidad? Entonces, lo que estás pensando es que parte de la capa polarizadora simplemente pierde sus propiedades polarizantes debido a alguna forma de calor. Does this come from direct sunshine or heat from the unit? So what you are thinking is that some of the polarising layer simply loses its polarising properties due to some form of heat.
Why did u use white paper n n n
does it work the same for coloured screen
@yaowen12
7 ай бұрын
Yes.
White paper is not a good solution for the background.... still struggling to find the correct material....
@logothaironsides2942
2 ай бұрын
I have seem metalic stuff used in old gaming machines.
I often watch these things with no sound, captions, and 75% speed. What music?? 😂
@2tallB
Жыл бұрын
Great video tho, very informative.
@RXSVN_2
Жыл бұрын
The background Music is kind of decent. But I can't see being able to focus on what's being shown with it playing at the same time.
@RXSVN_2
Жыл бұрын
@@2tallBThen I speeded it up to 1.75x and it is crazy 🤣
Would have been a good video, but the banging music or noise was too much for me!!!!!
*GET RID OF THE FRICKIN MUSIC!*
Please stop it with this stupid music
HI, what is the name of the adhasive tape
@batmandestroys1978
4 ай бұрын
Good quality strong cello tape! Buy a glue gun, that will do the trick! put a thin layer on it!