Handmade Guitar Bridge Part 1 - Brass Saddles

Тәжірибелік нұсқаулар және стиль

Im making my own guitar bridge to go with my custom guitar design.

Пікірлер: 5

  • @Pollys13a
    @Pollys13a4 ай бұрын

    Very interesting, thanks so much for sharing :)

  • @Martyn-ey9lw
    @Martyn-ey9lw Жыл бұрын

    looking good so far

  • @leeceeworkshop

    @leeceeworkshop

    Жыл бұрын

    Thanks for watching ! Just completed the base. Video should be up now.

  • @JamSlamsly
    @JamSlamsly5 ай бұрын

    Nice work! Scale length has nothing to do with your saddle width and string spacing just as a tip from a pro builder... scale length is the length of your scale from the nut to the saddles and is important for things like string tension and intonation which is the accuracy of your notes the further away you get from the nut.... string spacing is dependent on your pickup pole spacing (if you arent using bar pickups etc) as your strings need to align above them (for the most part) there are two universal spacings... F space (Fender and Floyd Rose guitars) which I believe is 50mm for both neck and bridge. The other is Gibson spacing which is 50 and 53 mm so Gibsons and the TOM bridge go wide and narrow up at the nut which is skinnier than Fender and Floyd rose guitars... The nut width is also key to to your string spacing... you dont want strings too close or too far apart. Hope that helps :)

  • @patrikbarro4537
    @patrikbarro453711 ай бұрын

    P r o m o S M ❗

Келесі