Construction continues at 4:50.

Thanks for explaining about "node points" right away at 1:10. 👍 Just what I was looking for. So much good info packed in here!

Beautiful, beautiful work of art. You're obviously a pretty smart guy. Plus you've got a shop that has great equipment. AND... you know how to use it. Good on you young man!!!

@ArnoldsDesign

5 жыл бұрын

Thank you for the compliment. I appreciate that.

Your mother is very blessed to have such a talented and thoughtful son, well done.

@ArnoldsDesign

6 жыл бұрын

Thanks, Gin :)

Just stumbled on this video and found all the detail and tips very useful. Two thumbs up for the anodized process down to the o-rings for keeping them looking beautiful. Music to the ears, literally.

Great video! Your shop is far above anything I've ever seen in a DIY garage. Your knowledge in several disciplines is too. There's no way I could ever have all the equipment necessary to do what you're doing here but I am really amazed at your attention to every detail. Especially the anodizing. Thanks for sharing all this and taking the time to educate all of us regular DIY heathens. haha

@ArnoldsDesign

6 жыл бұрын

Thanks so much for your comments :)

Excellent work, sir! As a jazz guy, I would suggest that you consider exploring the use of whole tone and diminished whole tone (aka "altered dominant" scales on future projects. You DEFINITELY have the "chops" for it. Very impressive.

@ArnoldsDesign

3 күн бұрын

Interesting idea.

Holy smokes, what an awesome homemade PVC anodizing setup...

@ArnoldsDesign

6 жыл бұрын

Thanks. I'm glad you like it:)

WOW!!!!! Too much work for me. I guess I am not that much of a perfectionist!!!! I definitely thought this was a business, that you sold these, due to the work and time that went into them. THank you for the video.

@ArnoldsDesign

6 жыл бұрын

Thanks so much for your comment. The way I look at it, I either set out do things right, or I don't bother.

Extremely methodical . It was a pleasure to watch you create . Thank you for the video .

@ArnoldsDesign

6 жыл бұрын

Thanks for saying so :)

Now that takes wind chime making to a whole nother level. I like the anodizing tank setup you have. Thanks for throwing out the formula for finding the node point. AWESOME job !!

@ArnoldsDesign

5 жыл бұрын

Thanks! I'm glad you like it.

Huge windchimes...sweet, deep sound !! Wonderful job, but its not easy !! Thanks for the demo.

GREAT WORK! i love the sound of those chimes!

Outstanding work!!!

OMGOODNESS! It’s beautiful! You did an excellent job! What an amazing gift!

@ArnoldsDesign

3 жыл бұрын

Thank you for saying so!

LOVE this video and all the info!!!! Pentatonic as opposed to a chord, I did not know! So well done!!

@ArnoldsDesign

5 жыл бұрын

Thank you! :)

Been trying to figure out how to make my own for a while, and I'm sure my phone speaker doesn't do this justice. Great instruction and informative. Thank you.

@ArnoldsDesign

5 жыл бұрын

Thank you:)

Those are the nicest wind chimes I've seen. Thanks for sharing. Beautiful work!

Wow! Nice work! The sound is incredible.

Well! I'll just whip one of those right out tonight! Great job!

@ArnoldsDesign

5 жыл бұрын

Thanks

Thank you for making this video. There were so many things in it that I needed to know.

Beautiful work, and they sound so mellow!

Nice work. They sound amazing!!

@ArnoldsDesign

4 жыл бұрын

Thank you

Great job! Thanks for sharing.

Really great 👍

They are beautiful. Very nice work.

Beautiful in sound and sight

@ArnoldsDesign

5 жыл бұрын

Thanks so much :)

Nice and beautiful sound!

Wow. Nice finishing equipment

@ArnoldsDesign

5 жыл бұрын

Thanks!

Wow! Beautiful sound n presentation

Love the details

Nice work. I like the anodise how to. Thank you.

@ArnoldsDesign

5 жыл бұрын

Thanks. I'm glad you liked it.

Very well done, Arnold.

@ArnoldsDesign

5 жыл бұрын

Just saw your comment. Thanks!

dude that is badass

@ArnoldsDesign

5 жыл бұрын

Thanks!

thank you for this! i looked up "how to make big wind chimes" and i got so much more than I bargained for. Great explanations, beautiful process! I hope you are able to make chimes again very soon (if you wish to)!

Very nice sounding!

@ArnoldsDesign

6 жыл бұрын

Thank you :)

awesome work

Really enjoyed your video man

@ArnoldsDesign

6 жыл бұрын

Thanks!

Wow...wealth of great info!

@ArnoldsDesign

5 жыл бұрын

Thanks so much!

@missrose9164

4 жыл бұрын

There is Science in everything

Fantastic I had tuned chimes when I lived in the States. My ones now I cheap untuned, I need to invest.

@ArnoldsDesign

6 жыл бұрын

Thanks

Whoah....you've got some super helpful info here....I'm actually taking notes. I haven't finished watching the entire video yet but just wanted to say how beautiful your chimes sound! Thank you for your tutorial!

@ArnoldsDesign

6 жыл бұрын

Thank you! I'm glad you like them.

@micki1973

6 жыл бұрын

Arnold's Design I have been thinking about making some for quite a while now but do you think it's even a possibility for someone that knows nothing about tuning? I've watched several videos and yours is the most informative. But it's also raised many more questions.

@ArnoldsDesign

6 жыл бұрын

Yeah, you can do it. There are chime tubing length charts on the net that will get you close, and maybe close enough where you don't need to tune them. I'd tune them for scales and not chords, because chords don't sound good for some reason, at least with mine. Plan your chime length for perceived notes, because that's what you'll actually hear. I used a guitar and compared the sound to get mine where I wanted them. The phone app is nice but not perfect. I think your ears are a better judge of tuning. The hang point should be 22.4% of the total length, so don't drill hang point holes until you're done tuning. There are builders like Lee Hite, who is a chime guru, who might do it a different way, but that is just how I do it.

@micki1973

6 жыл бұрын

Arnold's Design that is so good to hear and I have watched a few of Lee Hite's videos and they were awesome as well but yours was easier for me to understand the most important parts. I did note the formula you used at the beginning of your video and also noted fundamental vs. percieved. I didn't understand what I was noting..lol..but it sounded important. Thank you so much for your replies and your advice!

@ArnoldsDesign

6 жыл бұрын

Absolutely. If there's anything else I can answer, let me know. It's been a while since I built those, but I'm sure I can come up with something.

I have an alto set of chimes, but the sound of these blows those away. I wish you had turned this into a product line and I could get one. These are some of the best sounding chimes I have heard. I love their deep sound.

@ArnoldsDesign

2 жыл бұрын

Thanks so much for saying so.

Amazing!

You're Brilliant and a wonderful son. I'm impressed, now I see why they're so expensive.

@ArnoldsDesign

5 жыл бұрын

Thank you for saying so :)

Amazing chimes and video too, thank you. I see why many are priced so high now. Southern Cypress wood is nowhere as pretty as Walnut but it resists rot the best. No porch here so I have to have it in an outdoor swing, other wood won't last in our area even using Thomsons yearly it won't. Replaced many small cheap chimes with cypress they're still going here today. These do sound perfect too...Very nice!!

@ArnoldsDesign

5 жыл бұрын

Thank you for your comments. Cypress would last about forever outside.

@PacificNorthwest360

3 жыл бұрын

Great comment, also if you Clear 2 part epoxy the wood it would last Forever. Cheers

That wind chime has got to be home made.

Your wind chime Sounds extremely good. Many I have heard get very annoying. But not yours, you did an excellent job. Keith

@ArnoldsDesign

Жыл бұрын

Thanks!

I'm really impressed by the work, the equipment and the result. I'm a mere mortal, however. All I can do is wish I could do that.

You are awesome 👌

Amazing love it 😍😍😍👍

@ArnoldsDesign

3 жыл бұрын

Thanks!

so beautiful~~~^^

The top really did have a great design. Could you have put it facing down so it could be appreciated?

Me: Can you make a nuclear submarine? Arnold: Piece of cake. I can tune it to F scale as well!

@ThePurpleHarpoon

Жыл бұрын

He told me he could not make any nuclear subs at this time. 😂

Lovely

@ArnoldsDesign

3 жыл бұрын

Thanks

Amazing work, thanks for sharing ! Which sound analyzer app do you use ? There are many apps but this one seems great.

Great video, thanks. How about if you just flip the top over so you can see the finished surface facing down?

Whenever I run into a dead aerator, I turn up the PSI, too. I’m just kidding. I actually have no idea what the hell you’re trying to teach me. I thought that this video had something to do with making a windchime.

Finally, someone gives the ratio for the node points! I have measured a lot of windchimes in stores, and musical instruments, and I came up with 1/5, which would be .200 I'm glad to find out I was wrong before building one. I'm surprised you used a scroll saw instead of a bandsaw - you seem to have quite a machine shop, so I'm guessing you have one. Did you give all of the (rough) tube lengths? I intend to start with PVC pipe for the first one, so making it large is not a problem.

So lovely and beautiful, but too technical and complex for me. I will just make mine out of regular copper pipes :D lovely sound!

@ArnoldsDesign

6 жыл бұрын

Thank you! Good luck with your chimes. There is a lot of tuning length info on the web. It will get you pretty close.

I use a Boss TU-12H. works great for chromatic . I can tune a piano with it but not a fish.

@ArnoldsDesign

5 жыл бұрын

I will look that up.

Your windchimes came out amazing. Would you consider making a pair for someone?

@ArnoldsDesign

4 жыл бұрын

Thank you for saying. Unfortunately I can't make any more at this time.

Excellent work friend and thank you for the technical aspects of the tuning process, which is how I found your channel. You definitely have a saleable product if you chose to go down that path. Your knowledge of the anodizing process is valuable but you may want to consider sending quantities of materials to a commercial anodizer. Much less hassle, safer, more room in your shop, and nosey environmentally minded folks will get no traction with your efforts! I've been an architectural metal fabricator for 45 years and love working with metal. I was thinking of going this route with brass tubing but aluminum is a nice option. Oh, and lastly, please get very comfortable and even desperately dependent on using safety glasses!! You don't want to be dwelling the rest of your life on why you didn't walk five feet over and grab your safety glasses!! Very lousy trade off.

I want one. I just found this video I love home made items and I want a Wind Chime that's real deep, low like church bells, deep very deep tones and purple to

Nice work. Maybe you could turn the top upside-down, that way you'd see it better.

@ArnoldsDesign

6 жыл бұрын

Thanks. That's a good thought.

Damn where did you learn al that stuffs making a amazing wind chime xD

@ArnoldsDesign

Жыл бұрын

I just read a lot I guess. I don't have the app any more, and don't remember it's name now. If you look up "sound analyzer" on google play store, a comparable app will come up. I've also used a well tuned guitar to tune it in by ear.

Is it possible to tune the fundamental and the partials? Is there any way I can hear only the fundamental? I hope you can help me!

@ArnoldsDesign

2 ай бұрын

Not that I know of. As far as I know, no material will give you one frequency without harmonic overtones.

If you were to put some copper screen in ends to keep bugs such as dirtdaibers out, would that affect the sound do you think?

@ArnoldsDesign

4 жыл бұрын

I don't know. I haven't had any issues with them.

I am disabled and cannot make my own but these are awesome. How much wound you charge to make a set of 7 footers? I saved the chime tubes from my old door bell (4 ft was longest tube) but then because try were copper someone stoled them and I never got my beautiful sounding chimes.

@ArnoldsDesign

4 жыл бұрын

Sorry about your situation. Unfortunately, I can't make anymore windchimes at this time.

ANYTHING can be done when you have the tools!

@ArnoldsDesign

5 жыл бұрын

Yep

@nowirehangers2815

4 жыл бұрын

And the brains.

Does a "node point" represent an octave range? I love how frequency and life are intertwined.

@ArnoldsDesign

Жыл бұрын

A node point is a position on the tube where the sine wave of the fundamental frequency and the overtone waves equal zero. In other words, none of the frequencies vibrate at the node point, so you can suspend the the chime tube there with dampening the sound.

@soundmapper

Жыл бұрын

@@ArnoldsDesign I understand that. In your video you have two nodes. I can't remember if cutting 1" away from one node vs the other would produce the next octave.

@ArnoldsDesign

Жыл бұрын

@@soundmapper I suspend them from two nodes for tuning only, both 22.4% of the length measured in from the ends. I'm not aware of how much the frequency would increase by cutting off 1". It's best to get a length chart off the net as a starting point. Cut each tube a little longer, and trim it to tune. I use a guitar in this case to tune.

Thanks for sharing. Is there a calculation for the clapper diameter? Like how much smaller than the B.H.C. of the tubes etc.

@ArnoldsDesign

3 жыл бұрын

Not that I remember. I just made it slightly smaller so that it wouldn't have to travel far before hitting a tube.

@spekky9012

3 жыл бұрын

@@ArnoldsDesign thanks! That makes sense. I'm thinking making mine 1/2 or 3/4 clearance. Love your video

@ArnoldsDesign

3 жыл бұрын

@@spekky9012 Thanks

Where do you get the tubes?

Dear Sir Thank you very much Kindly tell the name of site from where we can purchase pipes

Didn't think it would be so involved but anyway...I want to buy chimes that size and what company do you think sells the best ones? Thanks so much.

@ArnoldsDesign

5 жыл бұрын

I don't have a preference. Just about any of the expensive ones sound good. Bells of Vienna, Music of the Spheres are about the only ones I'm familiar with, and they both sound nice.

@SuperPussyFinger

4 жыл бұрын

Dan Thomas - Woodstock chimes are generally deemed the best on the market. If you have the means, I especially recommend the Chimes of King David.

I will like to buy one from you I can't build one that sounds as good as yours

@ArnoldsDesign

2 жыл бұрын

Unfortunately I don't have time to build them to sell.

I'm thinking about making windchimes in my garage. Can you give me any advice?

@ArnoldsDesign

5 жыл бұрын

Just follow some of the things I did in the video. There's a lot of tuning length info on the net. That's important to sound good. Tune to scales, not chords. Strike either the ends or center of the tubes to get full sound. There's too much to list, but that will get your started.

Bro, those chimes are awesome! Great job. How much would a set like those cost?

@ArnoldsDesign

Ай бұрын

Thanks. I know some brands go for a few hundred dollars in stores. I don't build these for sale. The anodizing alone takes a huge amount of time.

@SuperiorDave

Ай бұрын

@ArnoldsDesign from your great video, that much is obvious. Your videos are great advertising, and people will want them. A nice webpage with links to your videos. You can make some serious bank with this artwork. Its definitely a unique art that you have a nac for, and you should be signing each one, for sure.

When drilling the hanging holes, do you have the centre of the hole on the node point, or the perimeter of the hole at the node point? If the centre of a 3mm hole is at the node point, the actual hang point will be 1•5 mm away from the node point. You can't hang something from the centre of a hole.

@ArnoldsDesign

Жыл бұрын

It's drilled on center. There is threaded rod going through the center point, so it sees center of node. Even if it wasn't, I haven't noticed that being off a slight amount creates a perceivable dampening effect.

Very beautiful do you sale them.I would love to purchase some this size

@ArnoldsDesign

2 жыл бұрын

Thank you for saying so. I don't have them for sale at this point.

How did you attach the string to the rods inside the tubes? I want to repair a really nice chime that is more than 20 years old I need to replace the cords

@ArnoldsDesign

4 жыл бұрын

There are a couple ways I've used. Tie the cord to a small bolt. Hold the tube about 45° downward, and slip the bolt down into the tube past the hanging rod. Once past the rod, spin the tube 180°, and tilt the tube upward until the bolt and cord slide back out of the top of the tube. Remove the bolt. The cord end is looped around the remaining cord and tied into a knot. This forms a loop around the inside rod. After that pull the loop tight. The sliding knot tightens over the hanging rod. Keep an eye on the knot as it tightens to make sure it stays centered inside the tube. Another way is to make a small knotted loop in the end of the cord. The cord is then lowered into the tube past the hanging rod. Use a J hook to grab the loop and pull it back around the other side of the rod and out of the tube. Once this is done, fish the remaining cord through the loop and pull it tight around the hanging rod.

@rty1955

2 жыл бұрын

How did you get the old knot off the pin? I have a very expensive wind chime that i need to replace the string. I have been searching on how to do this. Which string do you recommend to use?

Yep. Nope…..too much for me- you go with your bad self tho…..thank you for the detailed video , it was really very good.

how do you string them??

If you wanted to paint them does that affect the tune

@ArnoldsDesign

2 жыл бұрын

It shouldn't affect the frequency, but it might change the timbre slightly. Some companies paint them and they sound good.

Do you sell these and how much I love the blue

@ArnoldsDesign

2 жыл бұрын

I don't. I would have to set up a place for production, and I have no extra room at my shop to do that.

Im wanting to anodizes some tubing. when you made your PVC tubes for Dying and sealing. What did you used to heat them?

@ArnoldsDesign

3 жыл бұрын

A 1500 watt hot water heater element, but you can get submersible heater from amazon pretty cheap now. If I'd had the ceiling clearance, I would've sat the pvc pipes upright to dye and seal. It would've been much easier.

@martyyates1115

3 жыл бұрын

@@ArnoldsDesign One more question. I'm using 2'' aluminimum I notice you had your tubing in for about hour and a half. how did you figure the time?

@ArnoldsDesign

3 жыл бұрын

@@martyyates1115 I waited for the voltage to plateau, and then start to drop slightly. That is when the thickest anodized layer is formed. Caswell plating has a great guide to anodizing that I recommend that will take the mystery out if it. www.caswellplating.com.au/LCD.pdf

@martyyates1115

3 жыл бұрын

@@ArnoldsDesign Great! Thank you.

@martyyates1115

3 жыл бұрын

@@ArnoldsDesign I have a question, how many Amp did you use for your longest piece of tubing?

what cost the aluminium?

Love it I'll pay you to send me one

@ArnoldsDesign

5 жыл бұрын

I don't make these all the time, but thanks anyway.

You could have turned the top over so it was visible from below.

Do you sell them

@ArnoldsDesign

6 жыл бұрын

I don't. Maybe at some point.

Beautiful work, but ... PLEASE, safety goggles! One drop of dilute sulfuric in your eye will ruin your day and perhaps affect you for the remainder of your life.

you want to use eye protection around all speed equipment. Assume strange accidents can and do happen and your face can be safe.

@ArnoldsDesign

6 жыл бұрын

Always a good idea.

@KAREN-OAKES

6 жыл бұрын

I was thinking the same thing.

Do you make them to sell sir ? 🙏

@ArnoldsDesign

Жыл бұрын

I don't. There isn't enough room in my shop for a production setup.

@luisvelasquez3216

Жыл бұрын

@@ArnoldsDesign so sad I live in Belize and would of love to have one, something that no one else has

I worked in GMC platting dept. for several years. You did not show the sealing in hot acidic acid. The sealing process was tested with a pair of probes at 800 volts. If it rang they where scrapped.

@ArnoldsDesign

5 жыл бұрын

They were sealed in nickel acetate solution. Boiling water is sufficient though.

Very nice!!! I just bought one from a local store in our town for $85.

@ArnoldsDesign

6 жыл бұрын

Thank you! That's a very good price for chimes. I've seen the large ones go for $200 to $300 or more for a set.

@johncook2763

5 жыл бұрын

@@ArnoldsDesign The Corinthian brand of chimes this size sell for about $800

I tried to give the video a like but when i click it, it just flashes and doesn't highlight it like usual. What's up with that?

@ArnoldsDesign

Ай бұрын

I don't know. I just tried it, and it works on this end.

@SuperiorDave

Ай бұрын

It's working now

Sanding like that is just cheating...LOL

@ArnoldsDesign

6 жыл бұрын

The lathe does come in handy at times.

This just got more and more complicated. Never mind. 😑

Anything over 12 inches is a wind pipe not a wind chime

Not difficult for those with a machine shop!

@ArnoldsDesign

3 жыл бұрын

The most difficult part was dragging my ass to work everyday to pay for that machine equipment.

It would be suggested that all the wind chime geeks use a streaming service in lieu of driving their neighbors insane. Chiming rights should end at property lines.