Handleit Grips grip enhancement installation on the Glock 19x
Here's a full installation of the HandelIt Grips on the Glock 19x. HandleIt Grips is a Veteran owned and operatied small business making world-class grip enhancements for many firearm models. Easy to install, and providing amazing grip in any conditons...wet, dry, hot, cold...even frozen! you can't go wrong with HandleIt Grips! A great alternative to stippling, which can cause irreparable damage to your investment! Check them out:
www.handleitgungrips.com
Пікірлер: 82
just got my 19x and was looking for grips. this helped a lot. Just ordered a trijicon rmr, true precision barrel, and a johnny glock trigger kit for it. hoping to make it my comp gun. keep up the good work.
Thanks for another informative video, brother.
Hello I have watched several of your video and have subscribed. Enjoy and have found your videos helpful. Thank you.
Very helpful video. Thanks!
thank alot man, very helpful, and informative.
Nice vid! About to put some grey rubber ones on my 43x. Did you skip the hairdryer part or just not show it? Curious if you totally skipped it and didn’t notice any difference in adhesion. Their instructions recommend using a hairdryer while pressing and repeating that process 2-3 times.
check out their edge series tape. excellent feel. very aggressive but not bad to your skin.
Great informative video Sir, well done!! Did you refinish the slide or is that an oem finish? Thank You
Covered up the reason I bought mine.
I would recommend using a heat gun or hair dryer to activate the glue to get better aheashen.
With the back strap you would NOT want to put it up high on the backstrap near the beaver tail. You want that area smooth so when you get your master grip your hand can slide up as high as possible. If it is stippled or textured your hand will obviously not slide up as high as possible. Some people do it but they really shouldn’t if they want to be the best they can be. Oh yeah great video! :)
@DesertGuardian
6 жыл бұрын
Brett Silva great point! Thanks for the input!
I emailed handleit grips about a kit for large backstraps, they said one size fits all. I honestly don't see it. Talon grips has a larger back piece for the large back strap
Does the grip come in coyote??
I have a question, I have the glock 19, I like the medium size beaver tale extension, can I leave it on and put on the grips or do I have to take it off and apply it?
How do the index finger part hold up pulling it out of a holster for awhile
I always remove the slide when installing grips .
Nice!!!
How different do these feel compared to talon grips ?
Compare this with Talon Grips
Sir, is this silicone rubber?
How are the grips holding up?
Hey brother I have an important question I need to ask you where on Earth did you get that Barrel I went online when I saw your first video when you installed your extended magazine release when I saw the barrel I tried to find one I could not find one where did you get it??
@DesertGuardian
6 жыл бұрын
panzos285 it’s from Backup Tactical www.backuptactical.com
@panzos285
6 жыл бұрын
Desert Guardian thank you my friend I really appreciate it
@bigtuna5334
5 жыл бұрын
Did the grip block the rear pin access for the trigger assembly??
Hay desert do you think you can do a review on an H&K mr762?
@DesertGuardian
6 жыл бұрын
Gabriel Rivera I’ll see what I can do! They are hard to find right now!
Love that barrel what kind is it. I know it’s threaded!!
@DesertGuardian
6 жыл бұрын
Dave 80 it’s made by Backup Tactical
Do they make these in a Tan/FDE color?
Any other colors to match the 19x?
Hey I was wondering where you got the honey comb stickers on your mag release??
@jeepsterchris5462
5 жыл бұрын
Mike Rau it’s not a sticker. The mag Release is made by Hyve Technologies and comes laser etched with the honeycomb logo
"You don't want to touch that adhesive and get oils and such all over it..."- then immediately peels off the entire backing paper and starts fingering all over the adhesive... : / How about taking off half the backing, using the rest to position the first application area?
@alant5757
4 жыл бұрын
I guess you didn’t listen to him.... he said “you don’t want” to.... I want to see someone install one of these and NEVER EVER touch the back adhesive side.
Me gustan los videos pero quisiera que tambien se den en español
what muzzle do you have on it
How are these grips holding up? I just bought a gen 4 19 and i seen these on eBay pretty cheap
@DesertGuardian
3 жыл бұрын
I've had them on for over two years, and still work great!
How rough is the texture? Is there any chance that it might damage clothes? We have a holster which puts the gun very close to our body and we're scared that our clothes might get damaged training with the gun.
@DesertGuardian
4 жыл бұрын
mlk22 it’s not rough at all. It’s grippy, but will not chaff or damage clothes. I’ve concealed carries these grips in all kinds of clothing and against bare skin. No problems.
@mlk22
4 жыл бұрын
@@DesertGuardian Ok Thank you very much. I think my colleague will try it then :)
You messed it all up bro
How are these grips holding up...Are they better then talon grips.
@DesertGuardian
5 жыл бұрын
Black Jack they are holding up really well! I had some talons on my Shield and they weren’t nearly as tough
It's just overkill to me. I don't find the G19x slips out of my grip to begin with. Better option than stippling though. That to me just permanently ruins your gun. Thanks for the review.
I dont like how the back grip piece doesnt fully cover the fde and leaves weird spaces. Or was it just put on incorrectly?
@daleeveland5579
2 жыл бұрын
Check out talon grips
If you could go back and purchase again would you buy the rubber or granulate grips?
@DesertGuardian
4 жыл бұрын
4city0fnopitysj8 the rubber. Every time!
I always take the slide off
Granulated is the way to go... You just need to sand it down a bit and it's perfect for concealed carry or duty carry.
You didn't clean the left finger rest with alcohol. Love the video
@DesertGuardian
4 жыл бұрын
Jay it always amazes me how people pick out the tiniest details and are sure to let me know about it. Good eye...oh and by the way...a YEAR later and it didn’t fall off.
I think they want you to use a blow drying at the end .
@dalebfast
5 жыл бұрын
I used a heat gun, on the lowest setting, cool down then repeated for maximum adhesion.
@tr7287
4 жыл бұрын
dalebfast not everyone has a heat gun, but most people have a hair blow dryer
Dude you need to add the retail price
@DesertGuardian
6 жыл бұрын
Angelo Bonsignore here you go...$10.99 on sale! www.handleitgungrips.com/product-page/glock-19-x-textured-rubber-grip-enhancement
For some reason I cannot find these grips on that website. What are they listed as?
@austinsuter328
5 жыл бұрын
They're hard to find on it. Check Amazon/Ebay for easier purchasing in my opinion
@tr7287
4 жыл бұрын
Badnewz ST handle it grips.com
Is it rubbery or granulated?
@DesertGuardian
5 жыл бұрын
Xavier Gutierrez it’s rubbery but solid...not like sand paper. Great texture
Is that the rubber or sandpaper type?
@DesertGuardian
4 жыл бұрын
J - MAMIS Castro these are the rubber type
Just add some heat to them and good to go
I thought I was the only one I also hate stippling
So no heat gun?
@jeepsterchris5462
5 жыл бұрын
aaronkoch100 i used my wife’s hair dryer afterwards. Honestly, the material is so nice I have run them on a few of my EDCs without using any heat afterwards.
Do they recommend adding heat to it to make it bond and shape on better? Kind of like what talon grip does.
@DesertGuardian
5 жыл бұрын
Dc2 it’s not necessary for all applications, but heat does help it get adhesion to the little nooks and crannies! Just a hair dryer...no need for a heat gun or anything extreme
And a hair dryer is your friend during the installation
Sure fire way to make your pistol look silly
how is it shooting the 19x without any backstraps? i love glocks, but i HATE removable back straps. there a cheap rickety feeling gimick on any gun. *CRACK* *sip* yep the glock gen 3 was the last good glock. wish it came without pic rails tho
@DesertGuardian
5 жыл бұрын
john smith In my opinion, it feels great! My hands are not huge, so I don’t need additional thickness or back straps.
@johnsmith-cx9vx
5 жыл бұрын
Desert Guardian thanks for the info man, what about that weird line on the back where you would put on the backstraps, does it rub your hand in a weird way? i mean i guess i just get the feeling this thing is really cool, but not meant to be shot without any backstraps... hope im wrong
@DesertGuardian
5 жыл бұрын
john smith I don’t even notice it. You should see if your local range has a gen4 and up rental model to try out. I think you’ll be pleasantly surprised.
@johnsmith-cx9vx
5 жыл бұрын
Desert Guardian ok cool, thanks for the info. i wonder if i can get a discount if i buy it with no back straps
@rdean45acp
5 жыл бұрын
I have the medium beavertail back strap on my 19x and it's fine. It is held in with a different pin it's just like normal, I love having the beavertail for added piece of mind that the slide wont bite me. Oh, and the 19x imho is the best glock ever, balance, follow up shots, and trigger are awesome at least to me, great gun!
6:14 I'm wondering why you'd want to install the grips with the slide on. 1) it's so much lighter and easier to maneuver around, improved ergonomics and 2) the "the gun is unloaded and cleared" part is quite obviously handled even better - there's no barrel to worry about where you're pointing it that you address at 6:14