Love it man!

Great stuff - hope you get more likes - super helpful video. I am looking to make a machine to copy neck profiles and this is a great inspiration

@lesperanceguitars8381

2 жыл бұрын

Glad I could help! I'm looking to make some changes to mine in the near future. Some videos will follow. I'd like to see what you come up with. Thanks for watching!

I built one of these long time ago didn`t work so great so now I built a cnc machine and watch it work lol ,,

@lesperanceguitars8381

3 жыл бұрын

Some day I too will move toward a CNC machine. I haven't yet because I still like to work things out the old school way.

Where did you get your stylus arm for this machine? I’m building something similar but can’t find any information on how to mount the stylus.

@lesperanceguitars8381

4 жыл бұрын

I actually built it myself. I used a 1" round pipe, mounted it to the top of the assembly with a homemade wooden clamp, drilled a hole in the end of the pipe for a drill bit extender long enough to get down close to the surrogate body. I tapped a hole in the side of the pipe for a set screw to hold the extender in place in the pipe. For the stylus, I drilled a hole in a piece of African Mohagany for a short Philips head screw bit, pressed it into the hole then chucked it up and spun it in my drill press and shaped it with some squared up flat blocks with sandpaper stuck to them. Checked the accuracy with a micrometer along the way. I carefully rounded the stylus to the shape of my 1/2" endmill bit 'till it was just right. Hopefully, I've explained it well enough for you to understand. I'll be upgrading this part of the carver in the future. I'd like it to be a little more robust. A machinist friend is going to make a solid rod for my stylus. Good luck with your carver, hope to see the end result. Thanks for watching!

Great vid, the size appears to my needs. Can you give some info on the build parts?

@lesperanceguitars8381

2 жыл бұрын

I used linear pillow blocks and rails from www.vbx.com. The X axis rails are 3/4" stainless steel rods attached to mount rails, pillow blocks are open to allow travel on rod without interface with mounts. Y axis is a 3/4" rod and two closed pillow blocks mounted to a block of hardwood. This allows for the Z axis as well. I plan on changing the hardwood for extruded aluminum soon. I just layed out the guitar body to be carved and a surrogate body to copy from, made sure I had enough room to allow the stylus and router bit to travel far enough to reach all edges of bodies. The placement of router and stylus was based on the center line of both body blank and surrogate body. I figured out the base of the machine at that point. I hope this helps and good luck.

@mikefinley4367

2 жыл бұрын

@@lesperanceguitars8381 Thanks,

🙌😃😊👍wo! nice

@lesperanceguitars8381

4 жыл бұрын

Thanks! I'm currently making new improvements.

Do you think it would have been better to make the machine bit smaller because you seem to be stretching a long way or maybe its just the perspective of the camera

@lesperanceguitars8381

3 жыл бұрын

The video angle is a little deceiving. It would be a little better if it were more compact but, all in all it really isn't much of a reach. The main thing is, the top carriage that holds the stylus and router need room to get to both sides of the piece being carved and the surrogate body. Thanks for watching!

👍👍👍,,.

hola, what are the dimensions of the supported rails and rails for router?

@lesperanceguitars8381

2 жыл бұрын

The rails are 3/4" SS rods at 40" long mounted on solid aluminum bases and the crossover rail is a 3/4" SS rod at 40" long. I used open pillow block bearings on the bottom rails and closed pillow blocks on the crossover rail. You can find these items at VXB.com. I hope this is helpful!

How much time does it take to finish a guitar ?

@lesperanceguitars8381

Жыл бұрын

If you are asking how much time for the copy carver process, I never timed it but I think it would be about 30 minutes or so just to carve the top.

Look for Dupli Carver . X Y & Z action

@lesperanceguitars8381

2 ай бұрын

I've seen that carver. It's a nice piece. Do you have one of those?

This machine is prone to vibration! It is not rigid enough! Should have used larger dia heavy tubing instead for the cross guides.

@lesperanceguitars8381

Жыл бұрын

Nope...no vibe problems with this machine. Very sturdy. I'm in the process of improving on this one overall though in the near future. Thanks for watching!