Hamskea Epsilon Arrow Rest Review w/ Dan from Elkshape
Тәжірибелік нұсқаулар және стиль
Dan Staton has been using Hamskea archery rests for years, and has put their limb driven launchers to the test. We sat down with Dan to discuss his thoughts on the new Epsilon. Lighter, tougher, and even more dependable, the Hamskea has quickly become his favorite rest to date.
Available at BlackOvis.com with fast and free shipping!
Hamskea Epsilon - www.blackovis.com/hamskea-eps...
Shop All Hamskea - www.blackovis.com/brands/hams... Shop at BlackOvis.com
Follow BlackOvis on Instagram / blackovis
Follow BlackOvis on Facebook / blackovis
Subscribe to BlackOvis on KZread / blackovis
Пікірлер: 16
The one important shot you are referring to happened to me. Ripcord drop away rest the internals failed and it did not drop. The fletching impacted the rest forks sending the arrow sideways wounding a 160 class Buck. The rest would drop but in slow motion. Now I’m trying the Hamskea.
@BlackOvis
Жыл бұрын
Sorry to hear that! We hope you enjoy your Hamskea!
Indeed! Had QAD Ultra on my Mathews V3X, breaking wanes! Couldn’t get fixed, replaced to Ham. Boom all ✅
@BlackOvis
2 жыл бұрын
👊👊👊
I love my hamskea epsilon rest, the only issue ive had is there is a sharp corner on the bottom of the mounting bracket where there are 2 screws. it cut the crap out of my 2nd thumb knuckle. I took a piece of 1000 grit sand paper, rounded it off and no issues since. not sure if mine was a one off, or if how i hold my bow was the issue. other than that one minor issue, its been a rock solid rest!
@BlackOvis
2 жыл бұрын
Thanks for the feedback! We haven't heard that from anyone else, but we're glad you got it figured out!
Not sure why everyone gets a stiffy talking about the preset 13/16 centershot.... Bro it takes like 10 seconds to set, and you're probably going to move it during a tune anyways lol That being said, i just ordered and epsilon after my QAD ultrarest started failing. should be here by the weekend, cant wait
Which is exactly why I ordered a hamskea last night! I can’t trust cable driven. Had it shift the other day and snap the launcher. Hella sketch
@BlackOvis
Жыл бұрын
Good luck! Hope you love it!
I’ve heard it’s louder, and the rubber thing on the cable sags down at full draw and will get snagged if your in brush.
@MatthewC137
2 жыл бұрын
Mine has been perfect so far, no trouble at all. It's mounted on my V3X 33 and I switched the actuation arm 180 degrees to use the top limb. By attaching it that way, that rubber thing you mentioned and the string it's on hangs much better and is out of the way of everything. I used the Hamskea piece that provides a better attachment point on the limb (for an extra $20) but it's not necessary.
@BlackOvis
2 жыл бұрын
We haven't noticed it being louder, but we will continue to field test it.
😆 you never had anything in your bow limbs and cams while hunting in the woods? Ripcord micro all the way. Works well with the cable attachment. Lmfao!
@BlackOvis
Жыл бұрын
Good and bad to every product!