Hakko FR-410 Desoldering Station is a Perfect 10/10 -JBC & Metcal need to take Notes!
Комедия
the Hakko FR410-52 in my opinion is the best desoldering station out in the market right now.
I got 2 stations mainly for convenience, that way I don't have to change out different size nozzles that often. And also because I like it so much and to me, it is worthy of having another one. Compare to the JBC DR560 the Hakko is much more superior to the JBC in my opinion because of the smart suction pump and the advanced heating element. The vacuum pump has a 0.2-second delay after you press the trigger and that delay will generate a massive burst of suction that is very effective in sucking out all the solder consistently without clogging it. And since the heating element heats up from the tip all the way down then the solder will not be solidified until it reaches the reservoir. So, therefore, will not easily clog the desoldering gun. Hakko got this desoldering station down to a science. Although I prefer Hakko's desoldering station, I do like JBC's Soldering and Hot air station a bit better than Hakko's.
I am not a fan of any company. I simply buy into whichever companies make better products regardless of price. The retail for the FR410-52 is $975.00 but keep in mind that the price doesn't include extra nozzles or filters. Also added there is another older version the FR410-02 that is obsoleted by the manufacture. So if you see it below retail price, especially by a couple of hundred dollars then make sure to ask if that is the current version and not the obsoleted one. Because the difference is quite big. It has 50 watts more of sheer power (190w-140w). That extra 50watts does indeed made a big difference in performance. And also it's now equipped with the new quick-change nozzle that is very convenient.
With any desoldering station, you have to add an additional $50 - $200 on top of the price for extra nozzles and all the filters needed. Any desoldering stations require constant maintenance. However, some desoldering stations required more or less.
Пікірлер: 42
I love this setup❤ i’m super jealous of those JBC stations and tip cleaners, my setup looks like crap compared…
I agree 100% !!! I am using 2 years JBC DR560, 1 year with electric pump, and second year with air pump. Air pump works much better, but today get Hakko FR-301 pistol- Amazing !!! JBC DR560 - all time cleaning and not enough power, always helping with hot air. Now plan to buy FR-410, before many Years was using Hakko FR-808. And FR-301 has 500 celcius range, FR-410 only 450, but on FR-301 450 is enough !!! At work Ihave weller WXR 3, much better desoldering , 120watt, cheap tips, but motor pump was damaged, and it costs in Germany like new FR-301. And Hakko USA makes very strange videos, thanks in color, not in black and white :) Thanks for video !!!
I need this!!!!!! Now I have ordered the Newest Model Hakko FR410-70, hope that is also great
I can hear the coqui ❤
Nice tools I like how you arange the lab
@forthosewhodare7325
3 жыл бұрын
Thank you! it's not really a lab, this is actually in my bedroom
@andreiciora2765
3 жыл бұрын
@@forthosewhodare7325 nice
@andreiciora2765
3 жыл бұрын
@@forthosewhodare7325 but in the future you will try the jbc desoldering station .
@forthosewhodare7325
3 жыл бұрын
@@andreiciora2765 I have lots of experience with the JBC and in my opinion, Hakko is the better product. It is also more rounded and well thought out than JBC.
@andreiciora2765
3 жыл бұрын
@@forthosewhodare7325 but can you say wath station is more better fx 951 or jbc cd- 2bqe
Thank you for this review. Do you have any experience with the FR-400 model? Apart from the additional cost, would you know if there is any downside to using the FR-400 over the FR-410? As well as being for general use, the 300 watts of power seems like it would be great for boards with massive ground planes.
@forthosewhodare7325
2 жыл бұрын
I've used the fr 400 in the past. It's a beefed up fr 410 and with a huge power PSU reserve for the heating core. I might be wrong but last I checked the fr 400 has the highest heating core wattage for consumers grade. If you doing lots of huge ground plane on a daily basis then for sure this is the station to consider. The only downside to the fr 410 would be the nozzle selection. The 410 has a lot more different style to choose from than the fr 400. Other than that, it is definitely superior. It also Hakko flagship
My fr301 heating element died. Do I get a fr301,410 or something else?
That looks great for bigger components but how does it do with much smaller size through holes. Like ones used for capacitors?
@ericschulze5641
11 ай бұрын
It's a year since your question, & I'm a novice but he's doing something wrong or has the wrong heat or the wrong tip, I have the 301 NEVER used a desoldering tool & it goes way quicker than that . recapping old recievers and it literally takes 1 second per lead
They say goot TP-280AS is way better than Hakko, JBC, Metcal or any other name brand on the market. I haven't tried it myself but I'm thinking of getting one soon. Another notable desoldering station is Exso Ledsol-350.
@Rhine_Labs
2 жыл бұрын
@@forthosewhodare7325 TP-280AS is garbage.. spend more time unclogging it then using it.
Is this better than the JBC DR560? i work on large thermal mass Boards and most of the times the JBC doesnt extract all the soldering and the JBC needs constant declogging.
@forthosewhodare7325
Жыл бұрын
Yes. In my opinion.
Who si better Jbc dr560 or hakko fr 410
What country you from? Because if you in the uk I just wondered where you buy your equipment?
@forthosewhodare7325
3 жыл бұрын
from US. I buy from where is the cheapest. Sometimes it could be on their own websites or from third parties like amazon.com, gokimgo.com, teequipment.com etc
@SURGE101
3 жыл бұрын
@@forthosewhodare7325 thanks I have to check them out because hakko quite hard to get hold of in the uk. Love the new fr410 they look brilliant.
@forthosewhodare7325
3 жыл бұрын
@@SURGE101 www.hakko.co.uk/hakko-fr301-de-soldering-gun.html
What can you say about PACE SX100? Have you tried it?
@forthosewhodare7325
3 жыл бұрын
PACE ST-115 Digital Desoldering Station with SX-100 Sodr-X-Tractor is second to none. Their quality has really improved since the last generation. The ease of use is just simply can't be denied. It is really that good. The heat transfer is very consistent from tip to end. I only wish that it would come with a different style handpiece than just the pencil type. Because not everyone prefers that style, especially if you have to desolder all day every day with it. The PACE ST-115 is def my second choice, but it is NOT Anti-Clog as they claim. I would say 9/10 when all the nozzles and filters are brand new and clean, but once it gets a little dirty, it will clog. I say 7/10 when it's been in use for an hr or so. The pump is quite strong but not as strong and sophisticated as HAKKO'S. I wish that they would make it optional for you to set the vacuum pump like how Hakko had theirs. It does have a lot of features but most are just not very useful. Also, I wish they would add a clogging indicator built into the LED Display, so that way you can see just how clogged it really is. It's not needed but it will be nice to have. Also, the Miniature hot air pencil that's built-in is pretty useless most of the time. I just hope they spent more time designing solely on the desoldering stations instead and increase the wattage on it a bit more because 120 watts is just not cutting it anymore. It's the reason why Hakko increase their older gen from 140 watts-190 watts and made a huge difference in the performance and very noticeable. And also, make a gun-type handle than their solely pencil-type. Because not everyone enjoys that style handle, esp if you do desolder all day every day and for the price of around $1000 after-tax, you would think that you will have a choice of what style of handpiece you want to use. If you prefer it then it is a great investment, and if not then it is a deal-breaker for some, especially with that asking price and many more reputable companies to choose from.
@vyacheslavbolotov1402
3 жыл бұрын
@@forthosewhodare7325 Thank you so much for such a detailed answer.
@greg_f298
2 жыл бұрын
I have a Pace St 115 station with the sx-100, its the best desoldering tool I have used-though I prefer the pencil style.
Hi, do you think FR-410 is sufficient for the work on large ground plane? I need to choose between FR-410 (150W) and FR-400 (300W), thanks.
@Rhine_Labs
2 жыл бұрын
Yea, will be like a hot knife thru butter.
@phuang3
2 жыл бұрын
@@Rhine_Labs I got the FR-410 already. Much better than my previous 472D. However, I need to increase its temperature to 450C to work on ATX power supply due to large ground/power planes.
hi! can i have model your jbc soldering
@forthosewhodare7325
3 жыл бұрын
JBC CD-E