h0ffman DJ set with laser visuals by Polynomial - NOVA Demoparty 2020
Музыка
I put together some laser visuals for a DJ set by h0ffman, for NOVA Demoparty 2020 - novaparty.org/
This was a lot of fun to make. Everything you see here is custom content and was manually synced by hand. The timeline contained around 4150 events by the time I was done and it took around 20 hours of sync work in total - due to the music being having a lot of variation and small details there was almost no room for copying and pasting to speed up the process. I finished it at 10am on Friday after an all-nighter, got a little under four hours sleep, then got up to help run the party. Exhausting but worth every minute.
The software I used is Pangolin BEYOND Essentials. The lasers are a Kvant Clubmax 2000 and 520laser Club 2000, controlled by a pair of Pangolin FB3 ILDA controllers. The fogger was an Equinox Vapour 1000. The video was recorded using a slightly broken Logitech C920 webcam with a horizontal line of dead pixels, which I had to cut out of the footage, hence the little visual discontinuity.
The DJ set is by my good friend h0ffman! Check out his streams at / djh0ffman
---
This got a lot more attention than I expected, and a lot of people have asked questions about reusing this video for various things, so here are my general answers:
- NO DERIVATIVE WORKS. This means you can't just upload this video or parts of it to KZread with your own music over the top. KZread will copyright-strike you for it if you try. I used to be more relaxed on this but after more than a hundred people ripped the content (almost always without credit) I'm fed up of dealing with it. Don't become the next channel to get banned for ripping off other people's work.
- No commercial or promotional use. If you're getting paid, or you're acting on behalf of a for-profit organisation, that's commercial.
- If you're live-streaming an amateur DJ set on Twitch or a similar service, you can play this video in the background (e.g. via greenscreen or on a monitor/projector) as long as you provide explicit credit within the video itself (e.g. an overlay) and include a link to this video in the stream description. It should go without saying, but "credit to their respective owners" or similar does not count as giving credit. Please note that VODs or recordings consisting solely of this video content with music on top would be considered a derivative work, which is not allowed.
- For commercial enquiries regarding custom laser shows please email gsuberland [at] gmail.com
- For anything else, ask in the comments!
Пікірлер: 144
No one has made club dance music like this on KZread. Truly original!
Love these!!
That was lasertainly incredible!
Tysm😭✨💖 perfectly syncs with the music ❤️👍
amazing! absolutely cool!
12 beers deep this is perfect :)
great color and pattern choices.
This makes my TV smart af
@woffe5799
4 ай бұрын
I love you
This is unbelievable!
Wooow so coool Man! U are a true artist!
Just blasted on the couch, in front of the big screen!!Buuuumpin!! So sick!!
Muy bueno, sirvió para la fiesta de mi hijito de 32 años ♥
@DJBiokinetix
3 жыл бұрын
XD
@yvngbryxn
2 жыл бұрын
hijito no es wey, esa madre ya pistea
@fabianemacieldarocha1213
2 жыл бұрын
kzread.info/dash/bejne/qKiYxtyOf8yxdJc.html
Wow very nice disco light with music.Thank you for sharing God bless
Excelente enganchado para empezar el verano bien arriba😊😊
Need More videos like this❤
So fucking cool!!!! This makes ambient so incredible :DDD Wonderful work!!!!!
Imagine showing this to a farmer from the 1600th century
@gsuberland
6 ай бұрын
The 1600th century would be the year 159900AD, so to them this would be ancient archaeology! :D
@4g6_miragecolorado00
5 ай бұрын
I imagine a witch hunt shortly after😂
@woffe5799
4 ай бұрын
I LOVE YOU ❤❤❤
@LockWithNoKeys
4 ай бұрын
@@gsuberlandyou mean ancient raveology!!
@unlokia
2 ай бұрын
Why a farmer, and why would he be “impressed”? He has better things to do
Well worth casting to the big screen. 😅 I think I even drooled a bit .... 🎉❤
This is so epic!! It must have taken you ages to make this laser show. It's spectacular!! Good set from hoffman too.
@geizabegot8395
3 жыл бұрын
E a coisa mais horrível do mundo
@thedoors-ofperceptions8330
2 жыл бұрын
@@geizabegot8395 N’importe quoi, les shows lasers sont extrêmement appréciés partout autour du monde ! Vous êtes de surcroît l’exception qui confirme la règle, puisque de là à trouver cela horrible c’est largement abusé & comique à la fois ^^
@fabianemacieldarocha1213
2 жыл бұрын
kzread.info/dash/bejne/qKiYxtyOf8yxdJc.html
Please make more videos of your laserwork. There's literally nothing like this on KZread it's amazing
@fabianemacieldarocha1213
2 жыл бұрын
kzread.info/dash/bejne/qKiYxtyOf8yxdJc.html
@spookyghost1688
8 ай бұрын
check out beat saber lightshows, they are similar. e.g. kzread.info/dash/bejne/e2SYr8Nxg8icZ7A.htmlfeature=shared
Проецирую световое шоу с проектора на стену, добавляю немного дыма и эфект потрясающий, спасибо
This shit busssin Sheeeeesh
cool beat
Mantap bro.....
10 hours visual like this please
sHEEEEESH MAN
fun party
@gsuberland
2 жыл бұрын
Thanks! If you ever want me to show off one of your projectors, I'm open to sponsorship ;)
Holy cow, awesome! Thanks for the hard work !! Is there anyway to make this sound reactive to a live beat with the program?
@gsuberland
Жыл бұрын
The full show, no. Individual cues can be set up to have certain parameters driven by external inputs like live FFT bands, but it's tricky to set up. The reason the show matches the music so well is that I spent hours doing all the cue design and sync by hand.
Goes Great with Swedish House Mafia Greyhound extended mix!~
🔥💎
🔥
Can i use your video ( no music) for my dj mix set , that i make, so your lasers will be @ background? i will set your name in description. Thanks, Niekos
@gsuberland
2 жыл бұрын
No, sorry. I do custom laser work if you want to commission something for your own use. You can contact me at gsuberland@gmail.com
Wow fantastic! What kind of lasers are they?
@gsuberland
Жыл бұрын
Full details are in the video description :)
Hey, I REALLY like the laser visuals. Is there a way I could get you to do something similar for a track I produced? We can work out some sort of payment for it, but I would really love to see this come through. Please let me know. Thank you!
@gsuberland
3 жыл бұрын
You can contact me at gsuberland@gmail.com to get quotes on custom laser work.
@fabianemacieldarocha1213
2 жыл бұрын
kzread.info/dash/bejne/qKiYxtyOf8yxdJc.html
My 65’ Sony OLED loves you 😂
very nice. what software u use to develop?
@gsuberland
Жыл бұрын
Pangolin BEYOND Esssentials.
Hey, just wondering if you used timecode for this? Cheers
@gsuberland
3 жыл бұрын
Didn't need a timecode. Hoffman pre-recorded the set and sent it over to me. After that it was just a case of loading the audio file into the timeline in Beyond and spending lots of hours on the design.
What are these lightings used for??
Como puedo comprar una de estas .?
That 0:06 tho
Which Laserlights do you use here? Thanks for answer - I wanna buy them. :)
@gsuberland
2 жыл бұрын
Check the video description, it's in there.
@thedoors-ofperceptions8330
2 жыл бұрын
@@gsuberland Les KVANT ClubMax sont de bonne qualité mais manquent trop de rouge sur des modèles tél que celui-ci (R637nm /340mW pour 700mW de vert qui plus est en 520nm), difficile d’obtenir du beau jaune sachant qu’il faut au minimum 20% de rouge en plus rapport au vert DPSS (532nm), et dans l’idéal jusqu’à 50% en supplément pour du 520nm diode, mais comme le rouge monomode est de loin la couleur la plus chère ils en mettent le moins possible, contrairement aux marques allemandes (tarm, RTI, etc…) qui n’hésitent pas à en ajouter 20% et plus ! J’ai 2 tarm seven avec chacun 2.5W de rouge pour 2W de vert, c’est en comparaison (R/2.5W) ce que KVANT met dans ses ClubMax de 10W et pour un prix bien supérieur (env 10k€) sans compter l’excellente divergence qui place les modèles Made in Germany dans de bien meilleurs rapports qualité / prix
@thedoors-ofperceptions8330
2 жыл бұрын
@@gsuberland En revanche le rouge en 637nm KVANT est un peu plus vif et lumineux que le 638 des tarm / RTI
Hi there ..i really want lasers for parties with 200 up to 300 people ..but irk really know how it works ..do u just plug in the cable from the musik box and the lasers sync with the music or how does this work ? Pls help thx
@gsuberland
3 жыл бұрын
Take a look at the video description for more info on how I made this. The short answer is that it's not automatic and it took about 20 hours of hard work just in sync alone. It's possible to manually sync lasers live (known as "busking") but it's never quite this tight and it's a full-time job for someone during the event. There's no automatic sync solution that looks anything like this.
@lunar_dimension
3 жыл бұрын
Don't... in a pandemic...
@quincydread5204
2 жыл бұрын
@@lunar_dimension MYOB and dont be a karen
Please make more!!! Also can you make these type visuals but without music playing during but instead edit in white or brown noise or brainwave frequencies at theta or delta hertz ( preferably 4, or 5,6 preferably 6.3 hertz or 7 hertz theta waves? Isochronic frequencies are much better than binaural simply because listeners do not require headphone use. Please consider. Also consider use of binaural recording equipment where u can record binaural sounds into each “ virtual ear “ and can make awesome sounds and direct them into the “ virtual headspace” listener will sense feel hear and actually be entrained to sense as if sounds are physically present. For example. Sounds made from blowing gently air , near the microphone, which is very sensitive- one will feel physical sense of air actually being blown. Not just will they hear the sound. But they will feel it and it feel real. One can really really blow minds with these images and the appeal in terms of psychedelic. And to have asmr like sensation of binaural effect PLUS ALSO brainwave stimulation and entrainment using sound waves frequencies all in one video? Too many good things can be found in that hahaha. One def needs to make that kind of video.
16:15 🔥
Yo im curious if this is a spectral analysis of the electrical signal of the audio file or if this was something that was made manually?
@gsuberland
9 ай бұрын
Fully manual.
@Lefachie
9 ай бұрын
@gsuberland Oh nice. Did you use actual lasers and record it with a camera, or is this generated with a computer?
@gsuberland
9 ай бұрын
@@Lefachie actual lasers. equipment list in the video description.
Are you still responding to comments? Got a few questions, thank you.
@gsuberland
Жыл бұрын
If it's something that isn't already answered by reading the video description, sure.
😘😘😘
be cool if this was embeddable
How about, I ask you, the owner of these videos, to be able to make use of them, leaving as a reference that the visual content is yours. I hope a nice answer as soon as possible 😊 I am a DJ and I want to publish music with your videos.
@gsuberland
3 жыл бұрын
No, sorry. The content here is not available for licencing. You can commission custom laser content for your sets if you want the equivalent of this, but if you're generally working with free stuff you solicited on KZread then I suspect the cost will be prohibitive.
Lmaooo i pranked my bf i was at a rave with this😂😂😂
Hello can I please use 30 second clip of this video for a class project of mine for school?
@alinaroxTV
Жыл бұрын
I already plan on giving you a credit in the end credits
@gsuberland
Жыл бұрын
If it's not being publicly broadcast that's generally fine, as long as credit is given.
Is there any specific name of these lasers? Actually i wanna buy.
@gsuberland
9 ай бұрын
Equipment list is in the video description. Be prepared to pay several grand though, this stuff doesn't come cheap!
May I use your product please?
@gsuberland
2 жыл бұрын
No. The content here is not for reuse. If you want your own laser show, you can hire me to create a custom one for you. If you're interested, you can email me at gsuberland [at] gmail for a quote.
Magkano po
48:30 what track is that?
@gsuberland
2 жыл бұрын
Not sure. I'll ask Hoffman when I next get a chance.
@gsuberland
9 ай бұрын
Possessions ft. MRo by Kiddah. Sorry for the long wait!
@iwjki1089
9 ай бұрын
@@gsuberland aahah oh my literally God! That's why I love internet. Thanks a lot, man. Appreciate that
where they sell that laser and what is it called
@gsuberland
3 жыл бұрын
The lasers are a Kvant Clubmax 2000 and a 520laser Club 2000. 520laser are now Lightspace, and they've changed their product lineup a bit. Controllers are a pair of Pangolin FB3 ILDA interfaces. The software is Pangolin Beyond Essentials.
If you start this video at 9 seconds it goes great with Sam smith unholy 😄
What was the power of the lasers
@gsuberland
3 жыл бұрын
2W each.
@TheMessenger212
3 жыл бұрын
@@gsuberland as the laser strength = nm and prices
@gsuberland
3 жыл бұрын
@@TheMessenger212 You can just google Kvant Clubmax 2000.
permissiin to let me use ur video for background ill give credits to you thank you so much
@gsuberland
Жыл бұрын
It can be used in the background of non-commercial live events, but not on anything recorded and not for other KZread videos.
@IANSKIE11
Жыл бұрын
@@gsuberland thank you sir
Price of each?
@gsuberland
3 жыл бұрын
A little under two grand for the cheaper, about three for the Kvant, plus the cost of the controllers.
@LV-bf5dx
3 жыл бұрын
@@gsuberland solid investment. Is there some type of license needed to operate these for events ?
@LV-bf5dx
3 жыл бұрын
@@gsuberland thanks for the reply btw 💪🏻🤝
@gsuberland
3 жыл бұрын
@@LV-bf5dx this was filmed in my house, but in the UK you can operate with no license for the most part. In Germany, Austria, and some other countries you need a licensed individual to run a laser show.
Wie heißt das Gerät
@gsuberland
3 жыл бұрын
Mein Deutsch ist schlecht, aber... Kvant Clubmax 2000 und 520laser Club 2000. Die controller sind Pangolin FB3.
@privateperson4499
3 жыл бұрын
@@gsuberland Danke. Du hattest Recht....
What is the name of this laser machine?
@gsuberland
23 күн бұрын
It's in the video description.
Its free can I us this video in my remix
@gsuberland
Жыл бұрын
No, sorry, this isn't free for reuse. If you're looking for custom laser visuals for your music, business enquiries can be sent to gsuberland@gmail.com
K67y😮
C'est combien
😂😂😂😂😂
play Tiesto's Adagio for Strings, turn off the sound for this and put it in fullscreen....thank me later
Cuantos buscaron este video drogados?
2
21:40
Goodshit🦠
This is Yuki from Shenzhen Optlaser happy to contact you, hope all the best! We are a China company specializing in the production of lasers. We sell everything from parts to complete laser systems. We hope to cooperate with you if we have the opportunity🙂
@gsuberland
Жыл бұрын
Hi! Good to hear from you - I'm a big fan of OptLaser. Send me an email at gsuberland@gmail.com :)
A
وتي
Ygu6r
^was soll das denn sein
This causes epilpsy take it down
email?
21:40