Thank You for this simple but fully explained the gyroscope concept and how it works, No complicated narration, No astronomic physics equations and even no rolling war music! Simply Amazing!..Thank you again

@OkkiMoeljadi

6 жыл бұрын

You are welcome. Thank you for watching and commenting.

Why is this comment section filled with people who speak poor english and want you to share the exact building instruction via email? It's oddly specific and strange seeing how dead simple the construction is.

@Gunzee

2 жыл бұрын

What is that horrible noise?

@grandalost

2 жыл бұрын

@@Gunzee é o barulho dá água da torneira da cozinha 🙂

@Mahmud071

2 жыл бұрын

Ah, the gyrocar, now in toy versions

@RajeshKumar-ry4on

Жыл бұрын

Who is the culprit?

@chrissantos7865

Жыл бұрын

This design sucks if you ask me

you have put great effect for this model that no one shouldn't question you, GREAT JOB

@OkkiMoeljadi

6 жыл бұрын

Thameen Ansari, thanks for your comment. Some people just don't realize how difficult it is to build this toy. This simple look doesn't equal easy.

Because of some people like him my love towards physics is increasing day by day

this video cleared all my conpects..thank you

@OkkiMoeljadi

8 жыл бұрын

+abhijith alolickal You are welcome.

@qabrm5367

3 жыл бұрын

@@OkkiMoeljadi I think he is a great joker 😂😂

@WiKiTWoNKa

2 жыл бұрын

I would like to know your concepts so I can understand why you said what you said when you said it. I think a concept is pretty much what you think something would do or how you think something works etc that's your concept of what you see I think that's what it means so now I'm going to Google it 🤣🤜🏾🤛🏿🙏🏾

@WiKiTWoNKa

2 жыл бұрын

Yep I was right... con·cept /ˈkänˌsept/ Learn to pronounce See definitions in: All Motoring Philosophy noun an abstract idea; a general notion. "structuralism is a difficult concept" Similar: idea notion conception abstraction conceptualization theory hypothesis postulation belief conviction opinion view image impression picture

Fantastic video! This is really incredible!! I couldn't have spent 4 minutes better than watching this really unbelievable action! It triple worths Discovery!

Nice build. A super demonstration of Gyro Stability and precession.

@OkkiMoeljadi

5 жыл бұрын

Thanks!

Finally I see a homemade gyroscope that isnt a CD rom hotglued to a motor shaft. Nice job!

@mrmanusia

3 жыл бұрын

Haha,

if you want to slow it down even faster without having to use your fingers then take the clip leads after you've disconnected them from the motor and connect them together (essentially short the motor terminals together). This will in effect turn the motor into a dynamic brake.

@mehmetuguryldrm5865

6 жыл бұрын

regenerative brake

@AverageMinion98

6 жыл бұрын

Or reverse the terminals

@dynamicautotech90

6 жыл бұрын

Its too risky for the electro motor, it should to give a little driver circuit to avoid roasted motor.

HOW BEAUTIFUL IS PHYSICS!

@idk____idk6530

3 жыл бұрын

Untill and unless You won't know the mathematical equations and Proof of gyroscope 😂😂 . Then tell physic is beautiful 😔😕

@DanyalShabirr

3 жыл бұрын

@@idk____idk6530 You are right, but tbh I enjoy maths and physics equally. With maths you can make calculations and with physics you can get the intuitive feeling. With both you will become unstoppable.☺️

@idk____idk6530

3 жыл бұрын

@@DanyalShabirr math is not for everyone bro . I hate math .

Parabéns pela construção deste giroscópio. Obrigado pela postagem.

感謝你，讓我啓發了另外一種靈感的構想 。 ~非常的感謝~

Центр тяжести лучше опускать. Колесо соответственно не стоило поднимать вверх

I have a question, for a small car do it needs to be horizontal or vertical to keep it falling on its side?

@OkkiMoeljadi

4 жыл бұрын

You can mount it either way but the more important thing is to control it correctly.

now i got the logic behind self balanced bike....superb man

Wow, thanks for this demonstration. I had no idea the principle was so simple.

@OkkiMoeljadi

5 жыл бұрын

You're welcome. Yes, this looks so simple. But I prefer to call this "the simplicity of complexity".

I didn't know balance could be achieved without roll... I see you have yaw and pitch but no roll and it's still standing. Nice!

excellent , congratulations !

@OkkiMoeljadi

6 жыл бұрын

Thanks!

Can anyone explain why the gyro only pivots on one axis perpendicular to the stabilized axis? I've seen the same thing on boat gyros and curious.

Without uttering a single word a lot of explained. Thank you I will try to simulate it in Matlab

If I come back from the pub with this spinning on my head , will it help me make it in a straight line ? :p lol

I want to make a food van version of a gyro car and use it to sell gyros just to confuse people.

@AltamashMusaShaikh

Жыл бұрын

😅

@dullvoicereader

Жыл бұрын

@@AltamashMusaShaikh they can buy the gyros from a euro?

Could you tell me, what is the wait of gyroscopic disc? I'm doing a project so I need information.

Realy Nice build and demonstration !!!

@OkkiMoeljadi

5 жыл бұрын

Thanks!

Would have enjoyed seeing your gyro toy running down a long smooth road

Add another gyroscope, but turning in the opposite direction, and you will have much more balance.

Does it be even more effective and efficient if we replace the wheel with two weighted objects like how we can able to see in the helicopter’s propeller? I mean the flybar paddle.

The gymbal was moving slightly forward and backward slowly. -Is this a gravity wave effect?

I find it really disturbing that you did not push the cart with the battery placed on the chassis for the purpose of this demonstration.

@OkkiMoeljadi

2 жыл бұрын

I did. Have you checked my second gyro-video?

@Douglas_Hamilton

Жыл бұрын

Me too, but found this video: kzread.info/dash/bejne/dIt_paumg5vThqw.html&ab_channel=OkkiMoeljadi

Every tray of waiter should have one of those.

Very clear how gyro does.

Nice concept demo, thanks!

@OkkiMoeljadi

3 жыл бұрын

My pleasure!

Here is a link to a gyroscopically balanced train that had millions spent on it. Brilliant. I messed around trying to balance a scooter, but as my workshop was the spare bedroom I eventually chickened out because if the flywheel had come loose it would have crossed the room to the wall, and burnt it's way through the floor till it got to the kitchen, and my missus would have had a field day! Good fun though. I used steel as it is plenty strong enough. www.absoluteastronomy.com/topics/Gyro_Monorail

@OkkiMoeljadi

6 жыл бұрын

Hi Roger, thanks for the link. And how is your scooter going? Have you managed to stabilize it?

@santhoshbarathi2519

6 жыл бұрын

excuse me sir...can u please explain the dimensions of the flywheel and the precision providing clamp...what's the exact price of the flywheel sir??

Battery on the platform and push

Now, this is what science is all about.. cakep!

very nice demonstration. added to my playlist (scavourites) = science+favorites.

@OkkiMoeljadi

7 жыл бұрын

Thank you Ankit Arya.

How to calculate between: Body mass weight / weight of flying wheel, To gain equal / more inertia to balance the object.

@OkkiMoeljadi

Жыл бұрын

I did not do any calculation. I just use materials I already have.

@dish_care

Жыл бұрын

@@OkkiMoeljadi I will simulate this digitally and record the data.

@asep.acep..junaedi9005

Жыл бұрын

This is Earth Rotation Work With Amechanical UFO part Alien i guess Work Good Excellent is Precise Best Presition Calculation Flatness Two Wheel Front Back Vehicle i guessingg.

amazing good job

@OkkiMoeljadi

2 жыл бұрын

Thank you!

simply beautifull!! Thumbs UPPP!

@OkkiMoeljadi

6 жыл бұрын

Thanks!

I want a scooter with that system. The self balancing when parked would be really cool.

@user-zo9dc1lu3q

5 жыл бұрын

@Robert Green Cool !!

R.I.P motor windings :P, they looked glowing red, all tho that couldve just been the brushes.

*Gyro-X Car* Search for it here on KZread !

This is amazing!

Thanx...for such a wonderful demonstration.

@OkkiMoeljadi

7 жыл бұрын

You are welcome. Thanks for commenting.

This is the future tech..

@LevenLappi

4 жыл бұрын

There was a legit car made in like, the 60s or 70s, that used a gyroscope to do this (two wheel gyroscope stabilized car) the company went bankrupt before perfecting it and ever since then it's been in a retro car museum. It's old tech that could've revolutionized recent year car tech. edit: it's called the gyro-x and it uses 2 trainer wheels or something to keep the car balanced when the gyroscope is turned off and when it's on, the small wheels retract so it's only the two main wheels on the vehicle.

@yenilmezturk6483

4 жыл бұрын

kzread.info/dash/bejne/l6Sqp9uihsXfaaQ.html

Why you don't build a battery box and put it in and push the cart around ? Would have been a better video to watch how the x car work ?

@OkkiMoeljadi

4 жыл бұрын

Why don't you just watch my other gyro-videos? That would have been better for you to understand my work.

Amazing self balance

Fantástico! Amo o estudos da física.

Hmm, I wonder if you could make a bigger one for a boat and save the $100k you would have spent on a Seakeeper? 😁

Did it stabilize the planet or what

@Eisnschwein

6 жыл бұрын

Pavel Prokhanov ist called a gyroscope Look it up

amazing, thanks for this video!

I think you did what you want to do. I can imagine that this prototype can be used in two and even one wheeled vehicles in balance without any user help like motorcycles. Maybe this future cars will be smaller, low energy consuming, low friction coefficient, safe and high tech as if from a science fiction film. I support your work guys, congratulations!

@OkkiMoeljadi

5 жыл бұрын

Thanks!

@MrClassiccarenthusia

5 жыл бұрын

🤔 I think you'll find that back in the 1950s and 60s this was already tried - it didn't get very far commercially, but the basic principles are applied to balancing gyros for small yachts so they don't sway as much in turbulent seas.. Attitude control gyros are also used in satellites and on the ISS..

@MrClassiccarenthusia

5 жыл бұрын

kzread.info/dash/bejne/hWierqlxgZTQiqg.html

DISLIKE! BECAUSE YOU STOPPED THE GYRO BY FORCE AND DID NOT LET US SEE HOW THE TOY FALLS ON ITS OWN! >:)

@OkkiMoeljadi

6 жыл бұрын

:P

@skallauddin312

4 жыл бұрын

@@OkkiMoeljadi please could you tell me the weight and dia meter of flywheel

We are amazing creatures

@jeeedeee1138

6 жыл бұрын

Flying Solo thanks for Allah

@Eisnschwein

6 жыл бұрын

Jeee Deee 😒 im sorry but there is no god... Atleast not in the form you believe...

@jeeedeee1138

6 жыл бұрын

Das Sahnebrot There is no book with words and sentences that written and printed with itself

@Eisnschwein

6 жыл бұрын

Jeee Deee before the universe startet there was no time so it seems like it just appeared out of nowhere But I think there is still something we dont quite understand about other dimensions I mean its even difficult for many people to imagine the 4th dimension and there are probably even more than we can precive or even understand I am pretty sure that we still have a long way ahead of us till we understand the things we cant right now... I still dont belive in an eternal beeing that created us and everything I think "god" or "Allah" or whatever you want to call him is just phsyics we stil have to understand...

@jeeedeee1138

6 жыл бұрын

Das Sahnebrot there is nothing logical in what you believe the logic is there is nothing can be create without creater , written without writer i suppose you to search about islam and knowing about it from muslims themselves look in islam there is no god but Allah ( in fact there is non relegion belives in one god today like islam) and i think thats why Athiests running from other religions because of ‏contradictions in it and complicated things like multi gods or 3 gods in one that our mind cant belive it! but in islam there is one creater who create us and will brought us to life after death to punishment who dont belive and and rewards the beliver islamqa.info/en/45529

Cool demo! Thanks bruv

@OkkiMoeljadi

6 жыл бұрын

You are welcome.

If you touch both positive and negative wires together because it's a DC motor you can use the motor as a brake but if you want to sell them out again slowly you put a resistor in between the two Leads

Надо было поставить аккум на самокат и катнуть.

More like fingerbreaker 9000

Congratulations 🎈🎊🎉 you are open America!!!!

เยี่ยมเลย ...อนาคตก็ทำติดมอเตอร์ไซด์คงไม่มีวันล้มแน่ๆ

Nothing new....there exist a car from the 1960 who exactly use this technique...its running with 2 wheels 😎

the gyroscope would have worked just fine upside down...

@user-jt6nw6wm5q

6 жыл бұрын

Azmeri Liza yeah but the cables would touch the rotating part

I will try this, for sure!

Hi! Great video man! For scientific studies, I was interested to know how you managed to fix the wheel to the motor. In first place I was thinking about glue but it appeared to me that it was to weak. Then I thought about welding but the small size of the parts can be tricky to attach. Thx for your answer.

@OkkiMoeljadi

5 жыл бұрын

The wheel is attached directly to the motor shaft.

BLACK MAGIC BURN THE WITCH

@notanengineer

6 жыл бұрын

no, it is gyro!

You stil don't get it

Very Good vidéo Who explain simply the gyroscopic effect.

@OkkiMoeljadi

6 жыл бұрын

Thanks.

Thanks for sharing, uploading a video takes time and dedication, greetings.Gracias por compartir,subir un video lleva tiempo y dedicación,un saludo.

@OkkiMoeljadi

6 жыл бұрын

Thanks for watching and your kind comment.

@antonyza

6 жыл бұрын

see you!happy easter.

Grease the Metals a bit

make it levitate...

how did u determine the weight of the gyroscope disc, any calculations u did if any pls tell

if you mounted the gyro vertically it could be used as a reaction wheel. Right now it is basically a top.

Short the leads together for a regenerative brake

The simple minded people in the comments going off about the materials used have no clue why the wheel needs to have mass in the first place... "I pity your stupidity."

Eu continuo sem entender como funciona os Giróscopios e suas aplicações em veículos

Does it work if the gyroscope is fitted below the cart

Four minutes wasted looking at a "car" that doesn't move ...

May be it's called "Time Machine" Which is very useful to waste others time..

That was cool... Cheers from Outback Australia... Rolf

how working if have 2 gyro and motors and both run different rotation.

This is lame who even cares

Hey there, one question. if you would lock the rotation of the flywheel, would the bike fall like if there would be no flywheel, or would it do something strange like fall slowly???

@youteee

2 жыл бұрын

fall like there is no flywheel.. btw there actually was a car built on this concept wayyy back in 1967. linke belwo kzread.info/dash/bejne/lY6a0rl9YJOun8Y.html

Thats crazy how the gyro knows were to be to stay up

can you tell me the methodology and approximate cost of the project.

can u just explain how all the forces have been balanced . i am just trying to understand gyroscopic effect. I would be grateful if u could help. Thanks!

@OkkiMoeljadi

3 жыл бұрын

You can read tutorials and watch gyro-videos from Jimmy Demello. I built mine based on his model.

@emmanueltondikatti8754

3 жыл бұрын

@@OkkiMoeljadi massive thanks dude. I am looking forward ro it.

Incrivel como fica equelibrado!

Very good work!

@OkkiMoeljadi

5 жыл бұрын

Thanks!

You should have mounted the battery to it so you could roll it. I love the simplicity of this. Very cool!

@OkkiMoeljadi

5 жыл бұрын

I did that. Check out my other gyro videos.

Gyronya dipasang vertikal seperti ban depan om. Terus dikasi push rod buat counter roda duanya.

A qwality build ! Good job!

@OkkiMoeljadi

3 жыл бұрын

Thank you!

what should be the rpm of motor? and what are the calculations required

@OkkiMoeljadi

6 жыл бұрын

I think there is no fix RPM for this. The higher the RPM the better. You will get more stability if you use high RPM. I did not do any calculation for this, I did this by trial and error.

Why not start at the static position?

Are you used any software for this project like Auto-CAD,CATIA,Solid work.

@OkkiMoeljadi

5 жыл бұрын

No, I did not use any CAD-Software to build this.

A car with 2 wheels is not a car. Its a bike.

@amritlalsingh7780

7 жыл бұрын

any thin that is balanced is a car4

hi Okki Moeljadi, me I know how did you connect the flywheel and the motor? If it is ok, thank you

@OkkiMoeljadi

4 жыл бұрын

It is just press-fit. Drill a tight hole at the center of the wheel and press the rotor shaft in it.

But turning the vehicle while driving also will be a problem right?

Dirivative will continue in conjuction with both PID and for the same programmes (which stabalize drones) it should far easier to get resolve. The motor cant run full all the time. Its cool

How did u manged the flywheel fabrication

Vamos pra frente!

You should use a brushless motor to get higher RPM with a LiPo battery so you can mount it to the scooter thing