Thank you for upgrading our cameras.

Sweet camera hack! I have the gx85 as well, sounds like you got a better deal on it then I did!

This is so easy, but freaking awesome! Thank you so much for making my gx80 even better 🎉

This is my favorite underrated channel these days. Always with good things and high production standards. I hope it will not be underrated for long though. ( ->like)

Unfortunately does not work with my European GX80. After handshake it says "ok,GX80-99A429,remote,encrypted"

Hy, Do you know if this model got HDMI LIVE mode and keep sending video signal trough the HDMI out put during filming ? ( My DMC-FZ300 LUMIX shutdown the monitor and give me a nice black window !!! ) PS : Same limitation on GH7 !! Thanks...

I just realized you have six monitors. Respect.

so what parameters can you change/set with using the Cinelike D? Are they all set by this profile? Not sure what it is.

Thank you, great upload quality.

How do I restore the standard picture profile? For some reason when I installed Cinelike D, it removed the other default profiles.

@Kyugunsou

4 жыл бұрын

Nico Perez Once you saved the CineD under C, then you need to choose "restore" while sill connected to the wifi, Or another workaround is to reset setting under camera menu, but make sure to choose DO NOT reset custom settings. Once you done this you should get all your default properties back and still retain CineD under C mode.

Thank You so much, it worked!!! but I couldn't set the three different options, only cine D

hello does it work on the lx100? is it safe for me to test it??

Was going to ask if this works on GX8, but then found that cined and cinev colour profiles are on there already in movie mode. Which is good.

What a monitor setup!

Just done this on my GX80, which annoyingly made me realise that this camera only has 3 user profiles C1-C3 which much share video and stills. So putting Cine V and D on C1 and C2 only leaves me with 1 free for stills. Not great. I'd have liked more tbh or at least C1-3 for stills and C1-3 for video.

Thanks a lot. It worked for me.

how you can set up shutter speed? shoud be double of fps...

hi, I already deployed both of the cinelike , now how to switch it?

Thanks a lot for a great video, just subscribed. :)

is it posible to disable automatic monitor off during wifi recording with same method?

Hello, is it better to avoid cinelike d when shooting a considerably desaturated scene? Imagine late, late autumn. GX85 Is my only camera at the moment.

dude, can i connect my gx85 by the data cable? or it must be by the wifi?

Fantastic tip! Thank you for sharing, will be trying this when I order my GX85. Does it work over Mac OS as well or only on a Windows system?

@TommyCallaway

6 жыл бұрын

I did this on my Mac.

Hello! Thanks for this! Do you know if there is a way to remove time recording limit (29;59) with a gx80? I'im in France, and this limitation is bad for me (concerts videos). And happy New Year!

PLEASE HELP. i downloaded the link and it showed google page with just a bunch of texts. i couldn't click on anything.

Great video! Does this hack still work? I dont have windows 10 pro so I don't think I can connect my cam. When I click on the connect/handshake links I get a message that it can't find the web page

Camera wouldn't sync to computer any ideas? Windows 10

This works on the ZS110/ZS100/TZ100/TZ110 too. I have 5k LED lights in my garage/office and there 2 shades of red, blue, green, yellow, black, gray, wood, and concrete from my chair. I think that Cinelike-V with -3,-3,-3,-5 and -2/3EV looks the most accurate, colors and the luminance. I'm using an LG 4k monitor in Cinema mode for comparison.

Do you know of a hack to remove the time limits for video recording? Thanks!

@TommyCallaway

6 жыл бұрын

+OrigMedia unfortunately not yet. I’ll keep an eye out!

Any one else come across the problem of losing the standard/ vivid etc settings? I ahve saved the Cinelike D to C3, but when I go to Shooting Modes, its just a yellow box, unable to change it to any of the standard modes. Does that make sense? Any ideas?

@TommyCallaway

6 жыл бұрын

+Ben Andrews use the hack file to restore the mode to standard or save a different profile over C3?

Does it work with the Lumix LX10 or LX15?

okay so I got it, but I can only use it in Custom mode and I can't manually expose. Is there a way to fix this?

@benjibenj7

9 ай бұрын

I have the same problem. I'm trying to find a resolution for this. Strange no one else is mentioning this issue

What the lumix gx850 can doit???

Is can it work on gx8 ? Please sir answer!

Any ideas on if this voids the warranty?

Building more weird things and doing more science is good - keep it up. I'd be worried about electric shocks though :-/

I love my GX85 as a vlogging camera.....my "studio" camera is a Canon so having this flat log will make it easier to match footage with the Canon.

Hi there, excellent video. Quick question is there a way to add he sequence composition feature from the gx9 to the gx85?

@reeshmalms6686

3 ай бұрын

Panasonic has added that feature to gx85 through version 1.3 firmware update.

Hello just finish doing this but have 1 problem Mu shutter speed is always on auto when I change to C (either 1,2 or 3) Is there a way to manually change the shutter speed ?

@edtechgrandouest

Жыл бұрын

did you find a solution ?

would this work with the gx800/gx850?

Ok I may be dumb...but when I try to connect on my MacBook pro...since i am connecting to my camera, it tells me I am not connected to the internet anymore because it doesn't have an internet connection. Also, what Wi-fi setting are you using? I see remote shooting and view, Playback on TV, Send Images While Recording and Send Images Stored in the Camera. Help!

@TommyCallaway

6 жыл бұрын

+DavidsAddictions download the file and open it with chrome. Then connect to the Camera WiFi. Remote shooting.

@dawhitecastle

6 жыл бұрын

Hmm...that is what I did , but it wouldn't connect to the internet, since the computer was trying to connect to the camera wi-fi, which doesn't have it's own internet connection.

No handshake button on my Windows 10 pc. Does not work, unfortunately.

I use a desktop without a Wifi interface. Is it possible to connect the GX85 to my Wifi router, and then connect to the camera from the desktop via wired LAN ?

@TommyCallaway

6 жыл бұрын

I don’t think so, but if you figure that out let me know!

@madbrainDotCom

6 жыл бұрын

Never mind, I was able to do it from my smartphone. I had read about a 200 Mbps bit rate 4K mode on this camera - is it a real possibility or not ?

yo Tommy, Im using a MacBook Pro and the link to download the file doesn't open! is it only doable on Windows platform?

@TommyCallaway

6 жыл бұрын

No I used a Mac. Download the file to your computer and then open it with chrome

Is there a way to undo this hack and restore the original firmware or whatever ?

Hey man, have you updated your G85 to the newest firmware, 1.3? Does it still work?

@FrancisAndRo

4 жыл бұрын

yes

thanks a lot

i have a question about the 4k output to a field monitor, do you have any issue with the signal

@TommyCallaway

6 жыл бұрын

I haven’t recorded to a field monitor yet, so no idea. (I don’t have one to test with)

@CARTEBLANCHE_MV

6 жыл бұрын

oh oke i"ll try asking some one else

can we hacked tha gh5 for vlog ? :P

big thank

Hey Tommy, many thanks for the thorough explanation. I have the Cinelike D/V profile installed in my GX85 in C mode, when I switch to Manual Movie mode i found the cinelike profile is not available in this mode, which means, i can't use cinelike profile in manual movie mode. Did I miss anything or is it simply not possible to use Cinelike profile in Manual Movie mode? Thanks!

@smalltalk.productions9977

5 жыл бұрын

i THINK you have to have manual movie mode set up BEFORE you do the change. at least that is my understanding from reading and watching other vids. good luck. thumbs up.

@benjibenj7

9 ай бұрын

I can confirm this is correct

I think I saved them but how can I switch between the different C profiles saved?

@TommyCallaway

5 жыл бұрын

Within the menu, you can set and save 3 custom profiles

Thank you!

hack it to record at 1080p 120fps please.... the only deal breaker for me the gx85 can't record 1080p 120fps.

Hacking is fun. I hack things and programs. If this video isn't relevant to you, that's okay, I'm going to building more weird things and doing more science soon.

@sameldin2022

7 жыл бұрын

Tommy Callaway Thanks a lot, keep the good work 👍👍👍

@olivierproduction

6 жыл бұрын

THANKS A MILLION!!!!!! Can you do a V-Log profile please ? ;-)

@TommyCallaway

6 жыл бұрын

+olivierproduction haha I don’t think you can unlock v-log in this way.. I’ll take a look though.

@jmcdarland

6 жыл бұрын

Quick question, i noticed after i did this i am not able to enable 4K live cropping on C1/C2...it is grayed out. Is this expected?

@TommyCallaway

6 жыл бұрын

I haven’t tried, or ever really used live cropping.. so no idea. This hack really should only change the picture profile though, so that’s pretty interesting.

Thanks :)

V-Log would be super dope

Tommy; could this be done with the new Lumix GX9 as well?

@TommyCallaway

6 жыл бұрын

I don’t know, but probably. If I get my hands on one I will definitely try.

is can it work on gx7 ? please sir answer.. like this information heck. thank you sir

@TommyCallaway

6 жыл бұрын

I don't have a gx7, so I can't tell you. Sorry man

For this hack, how do you get the manual video mode? I can't control the aperture. Everything is in mode P!

@TommyCallaway

6 жыл бұрын

Set your camera to Manual. Then enable the hack. Then save it as one of your custom profiles. Then when you open C and load the custom profile, it will be all manual. The C modes are a little weird.

@oskvisuals

6 жыл бұрын

Tommy Callaway Thank you for the reply

@kevindavidestigoy5245

6 жыл бұрын

Tommy Callaway I tried installing this, I followed every step. It works fine for me however I can't control my ISO, I think it's set to auto? How can I maually change my ISO in C mode using this hack? TIA

@gregbutler7172

3 жыл бұрын

@@kevindavidestigoy5245 I heard another tuber say it's stuck in auto. Can be altered in post apparently

would this work on a GX800(850 in USA)?I read it should..anyone tried this?thanks

@KuijperRob

6 жыл бұрын

not working bcoz no Custom Mem Set C1,C2 options!..unfortunately

Hi Tommy can I check if you did this after the 1.2 firmware update? Afraid that if I update this 'hack' will be disabled

@TommyCallaway

6 жыл бұрын

I haven't updated yet, still running 1.0. I really doubt the hack will be disabled if you do update, though. I'll update soon and report back.

@aiebokn

6 жыл бұрын

Thanks will wait on the update!

@oskvisuals

6 жыл бұрын

aiebokn I have got 1.2 running and it seems to run fine.

Maybe they fixed it but it doesn't work at the moment for me, the handshake can't give me the acces to my GX80 via computer or smartphone...i'm so sad !

@TommyCallaway

6 жыл бұрын

Make sure you're on the correct wifi? It still works for me.

@nlsd.9616

6 жыл бұрын

I dont know what I did wrong but it works this morning, thanks a lot for your answer ! :-)

Download the link and i get a html file....? and what do i do with it

@TommyCallaway

6 жыл бұрын

Follow along the video. Connect to your camera, click the links.

@Petrolhead66

5 жыл бұрын

@@TommyCallaway However as Robert said, its just some HTML text. You need to copy and past this into a Text Document and then save it as a HTML file. When you then double coick on the file you just saves, you will get what Tom is talking about. This, TOM, is not covered in your vid

Can I use it for my GH5?

Cool. With Ninja V it also records with 10 bit, according to what I can see in Resolve file metadata.

@therrera117

8 ай бұрын

Please show me this I’m interested in knowing more

hi there. the IP address in the hack file should be changed according to my network? camera doesn't seem to be able to connect to my computer with the .54.1 address I don't know if this should be changed.

@guyrab

6 жыл бұрын

the computer see and connects to the wifi network of the camera but the camera is always on "please connect to the following..." even though I connected via the computer - this is probably due to the fact it's via the computer as if I connect via smartphone it gets out of this mode.... anyway, I cannot do handshake or connect via the html file as it doesn't finish the first step.... it doesn't do anything. help will be appreciated.

@guyrab

6 жыл бұрын

so I don't get to see "establish connecting with ...." on the camera

Hi Tommy, Nice video. Can you still keep the Standard mode on the camera, you set to C3?

@TommyCallaway

7 жыл бұрын

+Tom Smith yes.

@epsonc882009

7 жыл бұрын

Thank you Tommy. Please bear with me as I'm new to these Custom Mode. So when you shoot video and want to use Cinelike D, V or Standard you turn the top dial to "C" then pick C1, C2 or C3? Or you turn the dial to"Movie" mode then pick C1,2 or3.

@TommyCallaway

7 жыл бұрын

+Tom Smith the C dial.

@epsonc882009

7 жыл бұрын

Thanks.

Cinema Like D works to photography...I new in photography so i try to understand if this hack helps in some way your RAW photos...

@tibigravel

3 жыл бұрын

RAW photos called raw for a good reason, because it is literally raw, a big pile of information intead of something final like JPG, with raw you can do whatever you want in post process. The videos in GX85 are technically a fast series of JPG files that's why you need Cine profiles, but high-end cameras these days are already having RAW video option too.

I wonder if it is compatible with GX850?

@MrNate727

6 жыл бұрын

wondering that too

@mikepeoro952

5 жыл бұрын

i tried it it did not

Crazy, but your hack works on TZ80 :) Thanks

@TommyCallaway

6 жыл бұрын

Awesome! Thanks for sharing

Will it apply to g7 too?

@TommyCallaway

6 жыл бұрын

+marvskie/marvin sandigan If I get my hands on a g7 I would be happy to test.

Woah, could you tell me what is your opinion on V-LOG on Panasonic G85, could it be added? Is panasonic not adding it so they can sell GH5? Could it be created or copied from GH4 and 5 ones? Thanks

@TommyCallaway

6 жыл бұрын

+Stay Close I don't think the g85 has the firmware for v log but if I had one I would try to hack it and see.

@stayclose37

6 жыл бұрын

Yeah, in GH4 was added later right? I want V-LOG on G85 really badly. I hope panasonic is not delivering because of profit. This kind of policy made me turn my back on Sony.

Hey what is the specs of your pc

@TommyCallaway

7 жыл бұрын

+Kritagya Soni late 2013 Mac Pro with 64gb ram, 6 cores, and two and FirePro d700's, 1tb ssd

@kritagyasoni9777

7 жыл бұрын

Tommy Callaway cool

hey man i really lie your video's, is it also possible to unlock v-log on the gh5 with your method

@TommyCallaway

6 жыл бұрын

+CFiSkillz I haven't tried. I'm a little more worried about publishing that though if I found out... gotta check out the legal stuff.

@CFiSkillz

6 жыл бұрын

Ok i understand, it is because i bought v-log for my gh5 but it was a bad unit so i recieved a new one but without v-log so i asked panasonic for it and they told me they can't help me. anyways keep up the good work :)

theat improve video quality? someone try this update?

@TommyCallaway

6 жыл бұрын

+adir abelhack it’s improved it for me. :-D

@adir5337737

6 жыл бұрын

thank you! you have video to compare (that you shooting)

This works on a G85 ???

@TommyCallaway

6 жыл бұрын

yeah, it should.

doesnt work for me ,(

@froznfire9531

6 жыл бұрын

now i have no profiles at all

@amer4967

6 жыл бұрын

i've the same problem... But you can restore But, yes if i deploy cinelikeD or V, nothing appears

I only got message OK, remote, encrypted.

@martinaleksandrov7080

Жыл бұрын

me too! the first time i tried it said the connection failed (on the camera) and after that that same message "ok, remote, encrypted" on the PC screen. Did you find a solution?

@NowyKurs

Жыл бұрын

@@martinaleksandrov7080 yes. Seams it's working but I can't remember now how it was done to be honest. I followed all the steps.

@martinaleksandrov7080

Жыл бұрын

@@NowyKurs managed! I though it doesnt work because it says excrypted, but thats what it is supposed to show. :D thanks for your reply!!

@NowyKurs

Жыл бұрын

@@martinaleksandrov7080 No worries. Good luck.

@lucianocardenas8176

Жыл бұрын

@@martinaleksandrov7080 hey, how did you get it working? I already tried many times and cant seem to get it to connect

Hello Tommy. nIce hack ;). Its permanent or will disappear after a firmware update?. It will void warranty?. Cheers :)

@TommyCallaway

6 жыл бұрын

It shouldn’t void your warranty and will remain as long as your custom profiles don’t reset

@Arestas25

6 жыл бұрын

Tommy Callaway thanks for your help 👍

@Arestas25

6 жыл бұрын

Nice. Thanks!!

Do I lose the warranty with this hack?

@TommyCallaway

6 жыл бұрын

I don’t think so, but don’t quote me on that. My best guess is you shouldn’t - you’re not touching the hardware.

Tommy: Following these steps could the GX850 model crash this Pana party too?

@TommyCallaway

7 жыл бұрын

+vinnie victory it should work, give her a try!

@vinnievictory1186

7 жыл бұрын

Thx... well i had planned on buying the GX850 for crazy cheap, hence my asking today. Don't wanna get stuck down the road ya know. Found very little info about GX850 mods despite it being so close to its cousin the GX85.

@amirulhakim3783

2 жыл бұрын

Have you tried it?

doesn't work

@TommyCallaway

6 жыл бұрын

+ivan krilatkov yeah it does. I’d be happy to walk you through it over discord Chat or something next week.

*HACKER-MAN*

Would this work with the gx850?

@TommyCallaway

6 жыл бұрын

I think it would, but I can't confirm... I don't have access to one. :(