A quick look at this lovely little kit kindly sent to me by Petr over at ASK.
Жүктеу.....
Пікірлер: 32
@johnrycroft39068 ай бұрын
XF 88. Dark Yellow 2. Nice looking kit there Nigel. I would love to see a ‘how to’ build video. You do such a great job.
@ronaldbyrne33208 ай бұрын
Very nice indeed. On my list for when I want to build these motorcycles. Thanks Nige.
@18thsquadlab4 ай бұрын
Nice kit but definitely difficult, not done for beginners. A lot of issue with anchor points and with the instruction manual. You can check the full build and painting guide on my channel if you want to know all about this kit 😊
@tonysurridge30338 ай бұрын
Excellent!, I thought you might go for that R75 kit after seeing that superb 3d set!,Ramcke brigade were paratroopers, & the sidecar was a shaft drive so BOTH rear wheels were powered!.
@NigelsModellingBench
8 ай бұрын
I had no choice!! I was given the R75.
@digbysirchickentf23158 ай бұрын
1/12 spoked wheels would be popular assuming they would fit onto most of the kits for each brand. like Aoshima naked bikes range for example.
@alexmoore28318 ай бұрын
Nice little kit but too small for me, but will watch your build
@JeffDonahueScaleModeling8 ай бұрын
Hi Nigel, These look like some really nice 3D printed parts. I'll be looking forward to seeing the build. Thanks for sharing. Have a great day. Jeff
@LarrysModelShop8 ай бұрын
Great review Nigel. There are so many different kits from manufacturers that I've never heard of before. That's why I enjoy watching different genres of model builders. It expands my knowledge as well as gives me a better look at this hobby. Thanks again!!
@NigelsModellingBench
8 ай бұрын
Glad you enjoyed it
@PhotoFlight8 ай бұрын
I'll second a vote for 1/24 wire spoke wheels!
@NigelsModellingBench
8 ай бұрын
Have you seen Motobitz?
@Zaplou428 ай бұрын
LP-55 Dark yellow 2 😀
@OzScalemodeling8 ай бұрын
Very nice bike :)
@NigelsModellingBench
8 ай бұрын
I think so too!
@tedr.8 ай бұрын
Very nice detail on those parts!
@gary63008 ай бұрын
Hi Nigel, great review. I've got this kit in the stash along with the zundapp; they are amazing kits for the detail. I just looked on the ask Website, and the update set is not showing up any idea when it it might be available at all. Also, I will be watching your build very closely. cheers Gary 🇬🇧
@tonysurridge3033
7 ай бұрын
Hannants are expecting delivery of the ASK 3d parts!
@johnkelly20988 ай бұрын
You read my mind, Nige. I have two 1/24 MG TCs which would love sets of wheels like those. Motobitz do some lovely ones for the E type and MGB so maybe before too long.........
@richardsiddon6108 ай бұрын
Interesting. Get it built.😂
@plasticmonkey55948 ай бұрын
That looks a nice kit ,Just built the italeri and yes wheels are a bit chunky
@stevengriffin78738 ай бұрын
Yes 3D printing is the way to go.
@Builtbyronny8 ай бұрын
Looks great 👍
@NigelsModellingBench
8 ай бұрын
Thanks 👍
@robertdundas45938 ай бұрын
build the darn thing!
@tonysurridge30337 ай бұрын
Received BOTH the bmw & zundapp kits from china(!) (10 days not bad) now awaiting HANNANTS to re-stock the ASK 3d parts-i did note that according to both the kit instructions there appears no means of attaching the 'jerry' cans to the bike/sidecar?.
@NigelsModellingBench
7 ай бұрын
Actually Tony, the BMW kit is awful!! Every hole is too small for the connecting pin and the use of PE is a little silly? I think the Miniart Harleys are better? The GWH is not unbuildable but it is tricky.
@tonysurridge3033
7 ай бұрын
Nothing that a TRUE modeller cant cope with though!, I have had FAR worse 'faults' on some kits that I have built over the years!.
@NigelsModellingBench
7 ай бұрын
Oh of course, but for a pretty modern kit.. its just a bit silly.
@toboldlygosmodelworks19738 ай бұрын
regarding the BMW R75 & Zundapp Ks750 weren't they more or less similar?
Пікірлер: 32
XF 88. Dark Yellow 2. Nice looking kit there Nigel. I would love to see a ‘how to’ build video. You do such a great job.
Very nice indeed. On my list for when I want to build these motorcycles. Thanks Nige.
Nice kit but definitely difficult, not done for beginners. A lot of issue with anchor points and with the instruction manual. You can check the full build and painting guide on my channel if you want to know all about this kit 😊
Excellent!, I thought you might go for that R75 kit after seeing that superb 3d set!,Ramcke brigade were paratroopers, & the sidecar was a shaft drive so BOTH rear wheels were powered!.
@NigelsModellingBench
8 ай бұрын
I had no choice!! I was given the R75.
1/12 spoked wheels would be popular assuming they would fit onto most of the kits for each brand. like Aoshima naked bikes range for example.
Nice little kit but too small for me, but will watch your build
Hi Nigel, These look like some really nice 3D printed parts. I'll be looking forward to seeing the build. Thanks for sharing. Have a great day. Jeff
Great review Nigel. There are so many different kits from manufacturers that I've never heard of before. That's why I enjoy watching different genres of model builders. It expands my knowledge as well as gives me a better look at this hobby. Thanks again!!
@NigelsModellingBench
8 ай бұрын
Glad you enjoyed it
I'll second a vote for 1/24 wire spoke wheels!
@NigelsModellingBench
8 ай бұрын
Have you seen Motobitz?
LP-55 Dark yellow 2 😀
Very nice bike :)
@NigelsModellingBench
8 ай бұрын
I think so too!
Very nice detail on those parts!
Hi Nigel, great review. I've got this kit in the stash along with the zundapp; they are amazing kits for the detail. I just looked on the ask Website, and the update set is not showing up any idea when it it might be available at all. Also, I will be watching your build very closely. cheers Gary 🇬🇧
@tonysurridge3033
7 ай бұрын
Hannants are expecting delivery of the ASK 3d parts!
You read my mind, Nige. I have two 1/24 MG TCs which would love sets of wheels like those. Motobitz do some lovely ones for the E type and MGB so maybe before too long.........
Interesting. Get it built.😂
That looks a nice kit ,Just built the italeri and yes wheels are a bit chunky
Yes 3D printing is the way to go.
Looks great 👍
@NigelsModellingBench
8 ай бұрын
Thanks 👍
build the darn thing!
Received BOTH the bmw & zundapp kits from china(!) (10 days not bad) now awaiting HANNANTS to re-stock the ASK 3d parts-i did note that according to both the kit instructions there appears no means of attaching the 'jerry' cans to the bike/sidecar?.
@NigelsModellingBench
7 ай бұрын
Actually Tony, the BMW kit is awful!! Every hole is too small for the connecting pin and the use of PE is a little silly? I think the Miniart Harleys are better? The GWH is not unbuildable but it is tricky.
@tonysurridge3033
7 ай бұрын
Nothing that a TRUE modeller cant cope with though!, I have had FAR worse 'faults' on some kits that I have built over the years!.
@NigelsModellingBench
7 ай бұрын
Oh of course, but for a pretty modern kit.. its just a bit silly.
regarding the BMW R75 & Zundapp Ks750 weren't they more or less similar?
@NigelsModellingBench
8 ай бұрын
Pretty much yes, different engines though.