The amount of guns that you guys are able to fish out of that river is starting to be suspicious 😂😂

@TheKinzlerBros

3 жыл бұрын

We we have found them in three different rivers but, I'm sure something shady has happened with a couple of them. thanks for watching

@argiewithagun1286

3 жыл бұрын

It's free

@SpringDavid

2 жыл бұрын

@@argiewithagun1286 i agree.

@bradley698

2 жыл бұрын

this one seems like somebody had accidentally dropped it in there and it was probably just one of those guns that most gun owners have that they used to test new ammo in in case it breaks a gun they don't want broken due to the duct tape the poor condition of it and the fact that they didn't care enough to fish it out

@JohnJones-sg6hu

2 жыл бұрын

Suspicious. Sounds like you have found somebody's dumping ground. They steal it; use it in a crime and dump it in a river where they think nobody will find it. Keep up the good work guys.

Amazing job, guys! I really appreciate the fact that you are so thorough and your eye for detail. Looking forward to your next video 👍🏻

@TheKinzlerBros

3 жыл бұрын

thank you Christian for being so nice with your comment!

Can't really call it a restoration when you have permanently decommissioned it when y'all chopped the firing pin....

@TheKinzlerBros

3 жыл бұрын

That's what was required by the sheriffs department. thanks for watching

@rustyshackleford8637

3 жыл бұрын

@@TheKinzlerBros I get that, but it's not as difficult as you think to get a form 1 to register an SBS. I would have loved to see that functional. In the future, if you run into a firearm like that, before you restore it Form 1 it. Cuz that shorty is gorgeous. Seeing it permanently disabled is so sad

@number3665

2 жыл бұрын

@@rustyshackleford8637 It has so much rust damage it's probably too weakened to be fired anyway. I know I wouldn't feel safe firing it.

@YoutubeIsRetarded689

2 жыл бұрын

Oh no... that part could never be fabricated.

@karvast5726

2 жыл бұрын

@@rustyshackleford8637 it's so rusty the barrel is quite ruined,i would buy a brand new single shot shotgun and chop it up if you want a short barrel shotgun

I love these videos, I'm doing restorations on guns myself and it's addictive

@TheKinzlerBros

Жыл бұрын

I'm glad you like them and yes it is very addictive and thanks for watching

Nice !!! Thanks for sharing the restoration. I appreciate being able to see what happens to your finds

@TheKinzlerBros

3 жыл бұрын

thanks for watching the restoration.

beautiful work. you did an alsome job. it well make a great wall hanger.

@TheKinzlerBros

3 жыл бұрын

yes it is a pretty cool piece to have

Cool wall hanger.

@TheKinzlerBros

2 жыл бұрын

Yeah it’s a very cool wall hanger and for it to be that old is just really cool to me thank you for watching

Great restoration! Learned ALOT watching you guys clean it up.

@TheKinzlerBros

3 жыл бұрын

Thanks we appreciate it, its definitely a process

nice job again guys!! Time and patience a understatement for what you guys just did!

@TheKinzlerBros

3 жыл бұрын

Thanks buddy! Ya it was a process, thanks for watching and commenting!

Next time try soaking all rusty metal parts in Brake Fluid. Let it soak for 10days to 2 weeks and all rust will be gone. Works great.

@TheKinzlerBros

3 жыл бұрын

sounds like a good idea thank you

Well done.

@TheKinzlerBros

2 жыл бұрын

Thank you very much Tyler

Amazing job guys, looks great!!!👏🏼👏🏼

@TheKinzlerBros

3 жыл бұрын

Thanks Ron cannot wait to restore the handgun!

Nicely done. I'm working on a few restoration videos of some of my own magnet fishing finds as well!

@TheKinzlerBros

3 жыл бұрын

yea its fun do to and see them become almost new!

I've made firing pins identical to that one, to fit various other shotguns. It's a cinch. Give me a couple of files, hacksaw, and an electric drill for a lathe, vice, and an old bolt. Also, a propane torch for heat treating. Takes maybe 45 minutes, if that.

@TheKinzlerBros

2 жыл бұрын

I know I agree with you but if I have it welded closed it makes it a little harder to swap out the pins.

@TheKinzlerBros

2 жыл бұрын

Sounds like you would need quite a few things and significant time with it alone to get it working again. thanks for watching

I am just now completing a restoration on an old H&R 20 ga. single shot. Mine wasn't as rusty as yours but it did have some serious rust scabs on it along with some sort of glue that once held some plastic front and rear sights. The stock and forearm had several dents and scratches as it was used for hunting for many years. People usually don't take care of a single shot, they use and abuse them. I used a orbital sander on the barrel to remove the rust, then a buffing wheel and a polishing wheel. I blued the barrel which turned out very nice. and I sanded the stock and forearm until they were baby butt smooth. Re-stained (red mahogany) them and finished them with a satin finish. I must say, it turned out very nice and I'm going to keep it. I love single shot shotguns. The simplicity of them make them a cheap gun to purchase and usually there is never any thing wrong with the works of the gun, just have to make them look like new.

@TheKinzlerBros

2 жыл бұрын

That is awesome and it sounds like you did a great job restoring it the right way,, we appreciate the comment and feedback. thanks for watching Gene

Congrats on the cool gun guys. Glad you got to keep it. Then restore it to that wow it’s awesome.

@TheKinzlerBros

3 жыл бұрын

thank you hannah it was a fun process!

I need to do this now. Free guns! Well done! >:0

@TheKinzlerBros

2 жыл бұрын

Thanks so much

Good job.

@TheKinzlerBros

3 жыл бұрын

Thanks!

Great restoration guys. I really like it. Cannot wait to see the next one.

@TheKinzlerBros

3 жыл бұрын

the next one will be awesome because we should be able to fire that one.

Awesome job guys!...and I hope you patriots are prepped as well!

@TheKinzlerBros

3 жыл бұрын

yes of course we are thanks for watching Mark

Great jobs guys. You do great restoration work!

@TheKinzlerBros

3 жыл бұрын

well thanks, i dont know if it is great work but its good. Thanks for watching

Wow lots of work, but what a great magnet fishing trophy. Great job guys. Very interesting to watch.

@TheKinzlerBros

3 жыл бұрын

i am glad you enjoyed it Janette it took us awhile to do this one

Nice. I'd weld over the firing pin hole on the breech face too, just so a new firing pin couldn't be installed.

@TheKinzlerBros

2 жыл бұрын

Yes exactly great idea and I welded the barrel to the receiver but still could do that well not really because I can’t get in there

You guys need to invest in some evaporust. Awesome stuff.

@TheKinzlerBros

2 жыл бұрын

I have actually used of apple rust numerous times I actually just got done trying to use it on a handgun that I found but it’s not cutting it so I am going to be doing electrolysis on this one

Great restoration, must feel good to restore a magnet fishing treasure. Super eye for assembly details and ya don't have to "fight the law" cause ya asked the Sheriff - get the pun? 😁😁

@TheKinzlerBros

3 жыл бұрын

thanks for watching very much!

Unbelievable job. Love it

@TheKinzlerBros

3 жыл бұрын

thanks so much Melissa thanks for watching!

Great Video guys, you take so muh care and detail in you're restorations well done 👍👍. Be safe guys keep doing wht you do.... 👍❄️👍

@TheKinzlerBros

3 жыл бұрын

thank you Sharon! We like doing it just would like to see more views on these videos we put alot of effort and time into!

Great work guys, I hope it comes more from you

@TheKinzlerBros

3 жыл бұрын

Yes we have another restorations going on right now. A 100 year old shotgun we found

Great job!! Looks fantastic!!! 😃

@TheKinzlerBros

3 жыл бұрын

Thank you!! 😊

Looks great. Love that you restore history.

@TheKinzlerBros

3 жыл бұрын

we love doing stuff like this we have one more gun to restore!

@kimberlyoertel4943

3 жыл бұрын

I'll look forward to watching that one as well. My husband and me restore metal lathes ans stationary gas engines. Most people just sell ruted up stuff for scrap. I bought a 1200 lb single sided Brute magnet for myself for Christmas. Waiting for water to unfreeze so we can begin a new hobby. Keep up the good work.

Holy cow this was a great video I enjoyed it. Thanks bro’s n

@TheKinzlerBros

3 жыл бұрын

yea it was a cool video but not many views its weird i guess.

Wire brush? I’m glad your time is spent on junk. What your doing won’t kill rust.

@TheKinzlerBros

3 жыл бұрын

Thanks for the tip and for watching!

Yay! You know these are my favorite!!! 😁😁😁😁

@TheKinzlerBros

3 жыл бұрын

We are happy to hear it, thanks for watching Debbie!

THAT shotgun looks like from team fortess 2 omg

@TheKinzlerBros

3 жыл бұрын

I do not know if that’s a game or or what but thank you for watching much appreciated Mikail yeah

Hi guys....great restoration, I enjoyed watching that....looking forward to more videos...Take care...stay safe...

@TheKinzlerBros

3 жыл бұрын

thanks for watching Martine

Wow your patience and eye for details !! .!

@TheKinzlerBros

3 жыл бұрын

Well thank you Judy we appreciate that!

Looks like y'all did another great job 👍👍

@TheKinzlerBros

3 жыл бұрын

Thanks 👍 Pap

Pretty cool! First time of the two times we ever went magnet fishing my son pulled a sawed off gun out of the river. It was in pretty bad shape.

@TheKinzlerBros

3 жыл бұрын

oh really did you just throw it away?

@doreencrespo7133

3 жыл бұрын

@@TheKinzlerBros No. He took it home with him.

As long as the length of the smooth bore barrel is at least 16" long from the edge of the chamber to the end of the muzzle, it is totally legal to not only own, but fire as well. And I have to say it looks at least that long. And if there is actual rifling inside the barrel, than any length of barrel is legal. Those are the ATF rules and laws. JMHO

@TheKinzlerBros

2 жыл бұрын

Thanks for the info, much appreciated and thanks for watching

@b237940b

2 жыл бұрын

That’s not right. 18.5” barrel for smooth bore over all 26”

@jgunpilot1

2 жыл бұрын

Nope, for shotguns according to NFA 18”. Most bright people cut them 1/2” long to prevent any borderline disputes.

@oreo28_51

2 жыл бұрын

Doesn't it have to be like that from the factory? (ex. Mossberg shockwave), and if you cut it yourself it turns into an sbs? I could be wrong

@jackmoorehead2036

2 жыл бұрын

For a shotgun the barrel has to be 18 inches and if not it is an NFA violation and considered a short barreled shotgun and a Felony to possess.

Looks really good nice job restoring it.

@TheKinzlerBros

3 жыл бұрын

Thank you! Cheers!

Beautiful work great piece of gun history in my opinion because if that gun could tell a story who knows what it would say and yeah that is a legal way of keeping the gun is taking the firing pin out or cutting it great work it's going to look awesome in display if I ever find something like that I would definitely do stuff similar to what y'all did keep up the good work

@TheKinzlerBros

3 жыл бұрын

thank you very much Tristan

@tristanbarnett6271

3 жыл бұрын

@@TheKinzlerBros no problem and I love the new foregrip I think it makes it look even more badass you should really make some dummy shells to fit into it to see if it still ejects

Really nice job, bros! Looks mint!

@TheKinzlerBros

3 жыл бұрын

Thanks P.K. we appreciate that! thanks for watching!

I need to go magnet fishing right now

@TheKinzlerBros

2 жыл бұрын

Yes you do it is a blast

Saw a video where the restorer made a diy sand blaster with 20 0unce soda bottle and air compressor. It would save u tons of time. Great videos. Td

Another great vid! Although it was pretty beat up, it breathes again! Great job on this one!

@TheKinzlerBros

Жыл бұрын

Thank you very much I appreciate it!

Oh wow this looks amazing very nice work guys. 🔫

@TheKinzlerBros

3 жыл бұрын

we appreciate you commenting and watching

Good job gentleman.

@TheKinzlerBros

3 жыл бұрын

thanks Don the next restoration is the Ruger!

If you can find a replacement forend you can find a replacement fireing pin. This is not demilled per ATF spec and is still a illegal sbs. Will ever be an issue. Probably not. Just a cool old wall hanger.

@TheKinzlerBros

2 ай бұрын

It got welded but, I hear you. Thanks for watching!

Great job guys!!! Pretty amazing to see it basically transformed back to what it looked like before thrown into river. Thanks for sharing. Looking forward to the next video. Stay safe!!!

@TheKinzlerBros

3 жыл бұрын

Thanks so much Diana, yea it looks pretty good, would have been better if it was blued but i did not want to learn how to do that on this gun. the next one we will re blue!

Great work 🥰👍👏

@TheKinzlerBros

Жыл бұрын

Thank you very much!

You did an amazing job!

@TheKinzlerBros

3 жыл бұрын

Thanks Dawn, cant wait to do the next one

Shotgun found in river within throwing distance from the road… you just found evidence my friend 🤣

@TheKinzlerBros

2 жыл бұрын

Possibly but no way to run ballistics sense shotguns do not have rifling also I did run the serial number through the police database came up with nothing and what else can you do unless there was first hand account of a crime being committed that has a description of the firearm to be specific enough to identify as the shotgun thanks for watching

The evaporust works really well I use it for everything that might be a little rusty or horrible

@TheKinzlerBros

3 жыл бұрын

Ya we have used it before, thanks for watching

Dismantling the gun like a gunsmith, there is more to you guys than you let on! Amazing job, look forward to the next one. Stay safe boys.

@TheKinzlerBros

3 жыл бұрын

yea well we try but we are not gunsmiths by a longshot. But thank you for saying that.

@gcart5619

3 жыл бұрын

thats one of the simplest gun types to take apart and stuff like that its just a break action shotgun

Restoration 7/10

@TheKinzlerBros

2 жыл бұрын

Thank You Seba me

looking at the before pic's, who knew there was a diamond under all that muck, great vid .

@TheKinzlerBros

3 жыл бұрын

Thank you for watching and bonus points for commenting!

Awesome video great job guy's Amazing restoration process very fun to watch! Thanks for sharing 👍 🧲🧲

@TheKinzlerBros

3 жыл бұрын

well thank Brockton for watching i hope you did enjoy it!

@BrocktonMagnetFisher

3 жыл бұрын

@@TheKinzlerBros I absolutely did! Awesome job!

Honestly I don’t understand why you don’t have more subs...common people!!!!

@TheKinzlerBros

3 жыл бұрын

yea i know it is very frustrating sometimes like now, we just put this video out and it has hardly and views. but thanks for watching. maybe share it to your friends and family might help idk, thanks Al

@goofusmaximusII

3 жыл бұрын

@@TheKinzlerBros I think its cause your not fakers but you guys will get it....yeet.

@TheKinzlerBros

3 жыл бұрын

@@goofusmaximusII thank you Fred and no we are genuine as they come! So yea i guess if we were freaking out more maybe we would have more subs

Nice job. Looks great.

@TheKinzlerBros

3 жыл бұрын

well thanks for watching Steven.

Very ice job 👌 👏 👍

@TheKinzlerBros

3 жыл бұрын

Thank you very much

Me encanta tu trabajo saludos desde colombia 👍en mi país lo llamamos changon buen trabajo .

@TheKinzlerBros

3 жыл бұрын

I do not speak this language but thanks for watching

Good job

@TheKinzlerBros

3 жыл бұрын

Thanks so much Roberta!

Realwatching so good

@TheKinzlerBros

3 жыл бұрын

Thank you

Nice job guys!😊

@TheKinzlerBros

3 жыл бұрын

thanks Hubert we enjoyed cleaning it up!

WONDERFUL WOW!

@TheKinzlerBros

3 жыл бұрын

thanks Robin

Amazing. The Forearm stock could have been shaved down a bit but incredible work nonetheless

@TheKinzlerBros

3 жыл бұрын

Yes it could have been but I liked putting a bigger one on as well

Super!!! 👍👍👍

@TheKinzlerBros

2 жыл бұрын

Thank you! Thanks for watching

Отличная работа. Удачи!

@TheKinzlerBros

2 жыл бұрын

Thank you for watching we appreciate it

Sooner or later, you might want to get a couple of bench blocks and a bench grinder with a carding wheel for cleaning. Also some Evaporust. Great job.

@TheKinzlerBros

2 жыл бұрын

Ya for sure, we are accumulating tools everyday its seems,, thanks for watching

Nice job with the clean up.

@TheKinzlerBros

3 жыл бұрын

well thanks so much Kathy we have one more restoration to do still coming up and that is the really nice gun!

Greetings from Arlington Texas. GUYS that was impressive. Wow didn't know you could do that to that gun. Great job. Great video too. Can't wait to see more of your work.

@TheKinzlerBros

3 жыл бұрын

Wow thanks so much for the flattering comment, also thanks for watching. I do no know if you have commented before but on this channel everyone that comments gets a response back. That is our philosophy

@cindyandrewsthompson

3 жыл бұрын

@@TheKinzlerBros I watch everything. I always start with greetings from Arlington Texas. You'll know me now. Thanks for the great videos.

Good job on the gun guy's

@TheKinzlerBros

3 жыл бұрын

thanks Curt for watching!

Good job boys!😊

@TheKinzlerBros

3 жыл бұрын

thanks Mar-bee

Looks awesome!! Awesome restoration 😎 You need a bench grinder with a wire wheel 💪🏼

@TheKinzlerBros

3 жыл бұрын

yes we are working on building a work table in our garage, we just moved into this house and need to build one so we can do this outside. Thanks for watching!

Great job,looks good

@TheKinzlerBros

3 жыл бұрын

Well we appreciate you watching Frankie!

Awesome job

@TheKinzlerBros

3 жыл бұрын

Thanks!

Cool sheriff tbh

@TheKinzlerBros

3 жыл бұрын

Oh yea for sure he was really nice.

I've use The Works for rust removal inside motorcycle gas tanks. It works really well.

@TheKinzlerBros

2 жыл бұрын

Ya it will eat a lot of gunk off of anything, thanks for watching

Great job really interesting

@TheKinzlerBros

3 жыл бұрын

thank you Julie very much!

All good thing takes time

@TheKinzlerBros

3 жыл бұрын

i know right it looked great we are working on the ruger now.

Great Work

@TheKinzlerBros

3 жыл бұрын

Thanks

The restoration picture looks amazing! I imagine the barrel lining is shot though. Good job bros~!~

@TheKinzlerBros

3 жыл бұрын

well you will have to wait and see, thanks for commenting already!

@chkohl1919

3 жыл бұрын

@@TheKinzlerBros I would strongly suggest you read ATF Rule 2011-4. Note, "Held,a firearm, as defined by the National Firearms Act (NFA), 26 U.S.C. 5845(a)(3), is made when unassembled parts are placed in close proximity in such a way that they: (a)Serve no useful purpose other than to make a rifle having a barrel or barrels of less than 16 inches in length(e.g., a receiver, an attachable shoulder stock, and barrel of less than 16 inches in length);" Just having the unassembled parts in close proximity is defined as a firearm. Cutting the firing pin off does not make this exempt from this rule, because it can be replaced in a mere 2 minutes. Why on earth would you risk a felony for a stupid KZread video? Throw that piece of crap back into the river like the idiot who made it.

@lev_iothon

3 жыл бұрын

@@chkohl1919 the ATF is a joke. they shoots dogs and sell weapons to drug cartels

@lev_iothon

3 жыл бұрын

@@chkohl1919 you can have a shotgun with a barrel under 18 inches as long as its "not intended to be fired from the shoulder" as is the case with the Mossberg 590 shockwave. it came from the factory without a butt stock and with a 14 inch barrel making it not a shot gun or rifle. legally its a non NFA item and unregulated.

@chkohl1919

3 жыл бұрын

@@lev_iothon The shockwave is manufactured that way and the overall length is over 26". There's also a number of pistols that shoot 410 rounds. The difference with this firearm is that it was clearly modified. There's a big difference between a large manufacturer producing barely legal guns that push the letter of the law, and a gun that literally had a hacksaw taken to it. It's a dumb law, but it's still a felony.

Great restoration however the destruction of the firing pin was painful to watch

@TheKinzlerBros

Жыл бұрын

Thank you very much, I know but I had to do it , thanks for watching

Amazing restoration work!! Very impressed !!! Stay warm and safe. ❤

@TheKinzlerBros

3 жыл бұрын

that dang kitty on your profile pic always gets me!

Pretty cool to watch you guy's way of doing this stuff. Try Winks maybe, or of course electro-whatever.

@TheKinzlerBros

3 жыл бұрын

yea Electrolysis is the way to go i hear but we have not tried it at all much!

Its not illegal as old as it is... but yeah great work on making a nice tube.

@TheKinzlerBros

2 жыл бұрын

Thank you that is nice of you to say. Thank you again

@raptorman6589

2 жыл бұрын

Oh yes it is

Its a shame it couldn't be fired. Looks excellent!

@TheKinzlerBros

2 жыл бұрын

Thanks, ya we didn't want to risk it, thanks for watching

Great job!!

@TheKinzlerBros

3 жыл бұрын

well thank you very much Marilyn we spent a lot of time on this one!

Nice job!

@TheKinzlerBros

3 жыл бұрын

Thanks Myssi!

Can I just say that you've got beautifully manicured nails/hands, especially considering all the work you do!! I enjoy your videos and like it when we get to see your face and hear you explaining the process (as opposed to just a silent, text filled video). Keep up the great work!! 👍♥️

@TheKinzlerBros

2 жыл бұрын

Well most of the restoration videos are just hands no talking text and that’s it I don’t like doing videos that way I like to talk some and be a little bit in front of the camera but they don’t tend to do very well for views so I’ve done some both ways and thank you for the compliment

“Today, on another Discarded Murder Weapon Restoration…”

@TheKinzlerBros

Жыл бұрын

Thanks for watching

Great video!

@TheKinzlerBros

3 жыл бұрын

thank you Becca for commenting!

I'm new to your site. I love this video. Thank you

@TheKinzlerBros

3 жыл бұрын

Well that is just AWESOME thanks Melissa i hope you watch more of our videos. Welcome to our channel

Nicest

@TheKinzlerBros

3 жыл бұрын

yea it does look pretty nice now but it cant fire!

Shelf leveling primer and flat black

@TheKinzlerBros

3 жыл бұрын

Thanks for the suggestions and for watching

Good job 👍

@TheKinzlerBros

3 жыл бұрын

thank you Nick hope so see your comments again.

This would be great to take to a gun buy back

@TheKinzlerBros

3 жыл бұрын

well idk it is not legal but i do not remember how those worked

Could have saved a lot of the wire brush by either using electrons or soaking in vinegar. It needs to be blued or it will rust.

@TheKinzlerBros

2 жыл бұрын

Yes very true I was new to restorations I have tried electrolysis now but it has not rusted I still have it I didn’t rust because I wiped it with Remi oil. I have done three other restoration since this shotgun and my newest one is not even live on the channel yet I almost made it live today but decided to wait until after the holiday weekend it is a 1917 Remington pump shotgun thank you for watching

High crime traffic? I like the videos tho seriously

@TheKinzlerBros

Жыл бұрын

No very low crime it was found on an abandoned bridge in the country in ND, thanks for watching!

Cool video!

@TheKinzlerBros

3 жыл бұрын

thanks Pete that is nice to hear from you!