Fantastic. The time and effort you have put into this build has definitely paid off. That is one sweet looking Bandit. Might even have a go at that myself with mine👌👈

@Timdb1999

2 жыл бұрын

Thanks a lot! If you have any questions feel free to ask me!

@Bluuzilla

2 жыл бұрын

@@Timdb1999 Hey i am probably gonna buy one of those. it has been sitting for some years and some stuff needs to be changed. The front fork is leaking, can i just replace the seals or do i have to buy new forks ? And are the parts expensive for this bike ? Its a bit rusty and i dont know if it runs but i can have it for like 500 bucks. First owned and only 20k kilometers run? What you think ?

@Timdb1999

2 жыл бұрын

@@Bluuzilla bike parts in general are expensive, but the prices of parts for the bandit are on the lower side of the spectrum. If the forks are in good condition you can just replace the seals, they don’t cost a lot and it is a pretty straight forward job. There are lots of tutorials on youtube on how to do it. Over all it is a very reliable bike so I think it is worth it😁

Well done. Thanks for sharing your journey.

Absolute work of art, good job man

@Timdb1999

Жыл бұрын

Thanks!!

Wow, 😮 great job !!! She looks so beautiful

@Timdb1999

Жыл бұрын

Thanks a lot!

This looks beautiful buddy

Beautiful, just beautiful...looks slick

@Timdb1999

Жыл бұрын

Thanks!

Great build. 👍. I did a bandit 600 build about the same time. I went the scrambler route but did similar frame mods with pod filters. I love the bandit!

@Timdb1999

Жыл бұрын

Awesome, sounds like a cool project as well!

Very cool transformation!

@Timdb1999

9 ай бұрын

Thanks!!

Great work

It was such a great bike...

Leuk filmpje Tim! Mooi geworden

Ziet er goed uit! Heel gaaf

@Timdb1999

Жыл бұрын

Thanks!

Nice job! 👍

@Timdb1999

2 жыл бұрын

Thanks!

Awesome, i had one bandit 600 in indonesia

Art ❤

Lekker bezig Tim. Die Bondt bike is erg gaaf geworden. Een hoop " veilige " kilometers toegewenst.

Bravo!!

Great job. I think they are nice looking bikes to start with though. If it would have been me, I would have tried to find one a little more ragged out.

Awesome work! I have the same bike but not that pretty. Really good job!

@Timdb1999

Жыл бұрын

Thanks!

WOW!!! Nice build! Congratulations on a wonderful project

@Timdb1999

2 жыл бұрын

Thanks!

@Para-ni5lx

2 жыл бұрын

@@Timdb1999 how many days or weeks may i ask ? 🙏🏼

@Timdb1999

2 жыл бұрын

It became a long term project since I also had drivinglessons simultaneously. In total I worked on it for 1,5 year of which like half a year almost every evening.

Nice....

Mooi

mooi

🤟🏻🤟🏻🤟🏻🤟🏻🤟🏻

Thanks for this video it’s helped me immeasurably. Just about to cut the frame and add the loop. Can I ask did you upgrade the electric system or stick with the factory

@Timdb1999

Жыл бұрын

Very glad to hear! I kept the electrical system factory😄

​@Tim de Bondt Nice project, I alsow have ccusto! how did you set the carburettors under the cone filters? What nozzles did you install?

Wonderfull bike! Coupoe quick questions, i have a 2000 bandit 600 that i want to do a similar seat style with. Where did you hide the battery?!?! Also how did you get the pods to run(they ran terrible on mine even with 105mains)

Where did you buy all the new stuff for on you’re bike? Want to do the same project 👊🏻

Super Video!! Woher hast du die Luftfilter? gibt es einen LINK oder Beschreibung dazu? muss dann noch was am Vergaser eingestellt werden. Danke

Did you fabricate the seat rail or buy it? Looks amazing!

Looks amazing! Is that a custom wiring loom? Or an old one with led adaptors?

@Timdb1999

10 ай бұрын

This is just the old one with led adaptors

Hi what back end did u use

Ich hab eine Frage wie hast du Luftfilter Verkleidungen ausgebaut ohne Vergaser?

Heel erg dik geworden man. Wil zelf denk ik ook een bandit kopen en hem op dezelfde manier ombouwen als jij hebt gedaan. Denk je dat het te doen is voor iemand die nooit aan een motor gesleuteld heeft? En hoeveel tijd was je ongeveer kwijt aan het ombouwen?

Dude! Im really hoping you can help because ive just bought a 600 and yours has inspired me to go cafe racer, how did you set up the clipons / drop the top yoke?

@Timdb1999

10 ай бұрын

If you add me on insta (@timdbondt) I can send you some pics

what are u using to clean the exhaust/cylinder ?

@Timdb1999

Жыл бұрын

I just used regular stainless steel polish

What exhaust did you use?

Great build, where is the seat from? I’ve got a 1200 I’m after doing something similar to

@Timdb1999

Жыл бұрын

Thanks! The seat is custom, I created the base using glassfiber and epoxy and glued and formed the foam my self. The upholstery was done by a professional.

Bonjour comment acroche vous votre garde de boue avant svpl merci

Mooie uitgebalanceerde Cafe Racer Tim, kun je me vertellen welke sproeierbezetting je hebt gebruikt?

@Timdb1999

2 жыл бұрын

Dankjewel! Momenteel is de carburateur nog helemaal standaard, op de terugvoerset naar 25kw na. Wanneer ik op een A motor mag rijden wil ik deze laten tunen, daar zal ik mij ook nog over moeten laten informeren.

S U P E R . . .

Hi looks great , what size did you get for the round loop at the back , also does the mushroom heads effect now it runs ?

@Timdb1999

2 жыл бұрын

Hi thanks! The hoop is 210mm on the inside. I had some trouble synchronizing the carbs but other than that I haven’t had trouble with the mushroom heads.

@Dylan_Walsh

2 жыл бұрын

Great, thanks , do you definitely need to tune the carbs before you put the mushroom heads on ?

@Timdb1999

2 жыл бұрын

Yeah I think that would make it a lot easier. Hard to say cuz I had to limit it to 35kw. But it does run very nice.

@Dylan_Walsh

2 жыл бұрын

Great thanks, I’ll try it & see how I get on , any other tips ?

@Timdb1999

2 жыл бұрын

@@Dylan_Walsh If you’re looking into changing the seat for something different, keep in mind that the alignment with the tank is a bit odd. This made making a custom seat somewhat hard. But other than that it was a pretty straightforward build!

Hi thank you for this video. The bike is beautiful. I have the same project with a bandit 1200. I want to do a back hoop like you. Can you give me more detail on your job please. Thank you

@Timdb1999

2 жыл бұрын

Thanks! I used a hoop that is 210 mm on the inside. I bought the hoop with the cut for the rear lighting already made. This is the kit I used: www.caferacerwebshop.com/nl/1-led-verlichting-hoop-kit-od-210mm.html

What kind of seat is this

Can you tell me where you got your handle bars please ?

@Timdb1999

Жыл бұрын

Yeah this is the link www.caferacerwebshop.com/nl/22mm-verstelbare-clipons-cnc-zwart.html

Hi tell me how long it took you to do everything?

@Timdb1999

2 жыл бұрын

In total I worked on it for about 1,5 years. The first half year I worked on it daily, after that I only worked on it every now and then since I still had to get my licence.

What front end did you use ?

@Timdb1999

2 жыл бұрын

Just the stock bandit front end

how muche it cost ?

Where do you put the battery ?

@Timdb1999

Жыл бұрын

I have put two 6v batteries in series underneith the seat.

Hey! Where did you buy the speedometer and headlight?

@Timdb1999

2 жыл бұрын

Hi! These are the links to the webshop I got them from www.caferacerwebshop.com/nl/velona-200-km-h-rpm-teller-zwart-80mm.html www.caferacerwebshop.com/nl/77-multi-led-koplamp-met-knipperlichten-zwart-type.html

@a.germane2114

2 жыл бұрын

@@Timdb1999 Thank you! Possibly using them for my own build.

@Timdb1999

2 жыл бұрын

Nice! What bike are you working on?

@a.germane2114

2 жыл бұрын

@@Timdb1999 I'm looking to buy a 2002 GSF600. Not making a cafe racer, but just some minor modding.

@Timdb1999

2 жыл бұрын

@@a.germane2114 awesome! Good luck😄

Very, very nice bike. Bro, where is the battery?

@Timdb1999

2 жыл бұрын

Thanks!, the batteries are underneath the seat. I used two 6 volt 12 Ah batteries in series to get a thinner package. They are about 55mm high so they fit easily under the seat.

@andreiangelescu7431

2 жыл бұрын

@@Timdb1999 can you send me more pictures and vids with the bike on facebook or whats'app, please?

@Timdb1999

2 жыл бұрын

Yeah if you hit me up on facebook i can send you some more details

@andreiangelescu7431

2 жыл бұрын

@@Timdb1999 what's you name on facebook acount? I don't find you. What profile picture have? Thank you!

@Timdb1999

2 жыл бұрын

@@andreiangelescu7431 m.facebook.com/tim.debondt.7

Whad a fudge

What clocks did you put on it? Looking to swap mine for something like that

@Timdb1999

Жыл бұрын

I used a Daytona Velona 80mm daytona-europe.com/en/velona-speedometerstachometers/4-velona80-electrical-speedometer-200-kmh-mph-white-led-black-87790-87790.html

Pues en España despues la puedes tiras al chatarrero no te oasan i t v

legal in germany

After to see all this destroyed bike and the original keep looking the best. The people and the trends... 🤦🏻‍♂️

So called "cafe racers" should go the same way as hipsters, Male top knots and pumpkin spice latte.

Too bad, wue don't see it very well

My opinion original look is best

@Timdb1999

2 жыл бұрын

There’s ofcourse no accounting for taste, I’m glad with how mine turned out😁

@robsonlansone

Жыл бұрын

Ok, buy a original

@tocilbucin9894

Жыл бұрын

open expose frame was better

@justinridley2414

Жыл бұрын

@@tocilbucin9894 l

@Mauricio_EPM

Жыл бұрын

Absolutely.

That thing will never run right because pod filters on the 600s are impossible to time correctly.

Шляпу сделал… был нормальный мотоцикл

how is this even allowed xDDDD

You turned a great motorcycle into a piece of hipster junk. 😂

またセパハン付けてシートちょん切ったカスタムか。 バカの一つ覚えなありきたり。 そもそも、こんなのカフェレーサーって呼ばねえし。

Уродство 🤷‍♂️😥🤔

Good job!!!! do you have Instagram or Facebook for see another photo of your cafe racer please. I have the same project and in this vidéo we dont see thé details and a view from afar of the motorcycle

@Timdb1999

Жыл бұрын

Thanks! If you dm me on @timdbondt on instagram I can send you some more detailed pictures of the build!