GS300 Turbo Install

Автокөліктер мен көлік құралдары

Just a quick video of my turbo installation on my 2001 Lexus GS300. It’s completely stock. I’m running the stock ECU, 6PSI high, and 4PSI low (wastegate spring) This is a kit I pieced together myself, a nice very mild stage one setup.
Beat made by: CMagikbeats cmagikbeats?igs...
Shout out to my sponsors
Modded World
/ modded.world
Vvash Auto Care
/ vvashautocare
ALL RIGHTS TO AND USE OF VIDEO IS RESERVED FOR NOSTALGIC RECORDINGS LLC AND DHATLEX LLC

Пікірлер: 235

  • @DhatLex
    @DhatLex3 жыл бұрын

    I’ve been getting a lot of questions, just so you guys know, everything is stock minus the exhaust and turbo setup. Stock fuel system, stock internals, and stock ECU. I do have a GReddy Ultimate, and a boomslang plug and play harness, just not installed. JUST SO YOU GUYS KNOW, THIS IS A VERY MILD STAGE 1 SETUP. You will not make 300+whp on this setup as is, safely and reliably. Again this is a MILD STAGE 1 SETUP.

  • @dt1productions918

    @dt1productions918

    3 жыл бұрын

    Props man, I got a 99 I’m wanting to do... so nervous my first time but good seeing yours. Sick ride man 💪💯

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    @@dt1productions918 thanks! It was my first time boosting too! Best advice I can give is to not be afraid, make sure you got another ride, and be prepared to spend money as you tweak your setup. My Lex has been down a few times, but that’s all things I’ll discuss in my follow video, currently shooting scenes still.

  • @calebwinters3733

    @calebwinters3733

    3 жыл бұрын

    what turbo do you have on it and where can i buy it?

  • @gillmccuddy

    @gillmccuddy

    3 жыл бұрын

    Sold my gs a while ago. I plan to import an aristo in a couple years. This here is a good start. If u can do a fuel upgrade and a tune next i think ull be really happy with the results. This is a great car to have and build on. One of my all time favorites.

  • @saintrikko7760

    @saintrikko7760

    2 жыл бұрын

    Whats the name for the turbo

  • @RudebwoyRacing
    @RudebwoyRacing3 жыл бұрын

    Great build, Love to see brothers perfect their craft. 🤘🏿💯

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    Thank you brother ✊🏾

  • @Mizt_Sim
    @Mizt_SimАй бұрын

    Sick build, nice work doing your own turbo setup!

  • @DhatLex

    @DhatLex

    Ай бұрын

    🙏🏾

  • @yuno3364
    @yuno33643 жыл бұрын

    looks slick my dude!!!

  • @NavaroSmith
    @NavaroSmith3 жыл бұрын

    Good job bro, liked the content

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    Thank you, appreciate the support!!! More content coming soon

  • @evanbastian2584
    @evanbastian25842 жыл бұрын

    So sick dude

  • @victorjordan8438
    @victorjordan84383 жыл бұрын

    The dog in the window at 3:33💀💀

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    Yeah my guy Caine wanted in on some of the action. I was waiting for someone to notice it!!!

  • @bluffgawd
    @bluffgawd Жыл бұрын

    Dope. Getting my gs together now

  • @frankieb2220
    @frankieb22203 жыл бұрын

    😎 Long Live Tha GS Baby.👌

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    🤘🏾

  • @IsolatedLLC
    @IsolatedLLC2 ай бұрын

    hell yeah🔥🔥🔥

  • @Risk0s
    @Risk0s3 жыл бұрын

    slick car man.

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    🤘🏾

  • @d4vincii_projects70
    @d4vincii_projects702 жыл бұрын

    Just finished this up on my lex on a 3.5 psi spring and when she hit boost she feels like a whole different car!

  • @DhatLex

    @DhatLex

    2 жыл бұрын

    Ayyy good shit bro

  • @anthonychao7033

    @anthonychao7033

    5 ай бұрын

    What manifold are you running ?

  • @anthonychao7033

    @anthonychao7033

    5 ай бұрын

    Or were

  • @ssjdavid
    @ssjdavid2 жыл бұрын

    Damn bro that’s fucking Awesome

  • @FiveMissiles
    @FiveMissiles2 жыл бұрын

    amazing i have the same color and year as well as gray interior. i also plan to do this

  • @carloscastellon7606
    @carloscastellon76062 жыл бұрын

    Good job my brother nice Ride God bless you

  • @DhatLex

    @DhatLex

    2 жыл бұрын

    Thank you 🙏🏽

  • @remellostarke7887
    @remellostarke78873 жыл бұрын

    Yeah... .nice work bro. I wanna instal on my mark2 grande

  • @igoatedyurrd4609
    @igoatedyurrd4609 Жыл бұрын

    Where’d u get the turbo kit from?

  • @hussamalrashidy4657
    @hussamalrashidy46573 жыл бұрын

    Nice broo great ✌️

  • @fettichasin1879
    @fettichasin1879 Жыл бұрын

    Where can I find all the part I need to do this setup and how much will it cost me?

  • @mathewsmith579
    @mathewsmith5792 жыл бұрын

    i just got a gs300 with 174XXX miles, i wanna get a turbo but idk if it can handle it, what should i do?

  • @apexvisiontv
    @apexvisiontv4 жыл бұрын

    I see you G. Handle you!

  • @DhatLex

    @DhatLex

    4 жыл бұрын

    Apex VisionTV You already know bro! Thank you for the support!!!

  • @dariuswilson9596
    @dariuswilson95967 ай бұрын

    I just wanna know when you bought the turbo from and how much did it run you?

  • @Vkandypaint
    @Vkandypaint3 жыл бұрын

    👌👌👌👌👌

  • @kkellerk23
    @kkellerk23 Жыл бұрын

    you should check Power Dynamix, they (back early 2000's) are the ones that made their money on making big power out of the gs platform. They use to sell trans upgraded sprockets for the trans to make some good power on. You've got a sick build.

  • @DhatLex

    @DhatLex

    Жыл бұрын

    Yeah I very familiar with them, thanks 🙏🏽

  • @M3Sin
    @M3Sin3 жыл бұрын

    Dope work man🔥id be down for a stage 1 for my gs3. A lil kick Is all you need sometimes.

  • @tonytran4857
    @tonytran48572 жыл бұрын

    can you please tell me where did you buy this complete turbo kit

  • @shayanshahid3563
    @shayanshahid35633 жыл бұрын

    You on stock ecu?

  • @jamalk8168
    @jamalk81683 жыл бұрын

    Damn! I've been looking for one of these vids for a long time. awesome work bro. Have you ever ended up tuning the car? or just kept it as it sits? Lastly, do you have instagram? Would love to keep in touch and see how the build goes. Subscribed.

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    Jamal Knapp my IG is dhatlex

  • @Pallidus_Rider
    @Pallidus_Rider6 ай бұрын

    This is exactly the type of setup I want for my 2000 300GS. Links to gear in description would be appreciated 👍

  • @DhatLex

    @DhatLex

    6 ай бұрын

    I got links in my newer video. Ppl just come to this one only. Guess KZread only push this video.

  • @carlosrivera5357
    @carlosrivera5357 Жыл бұрын

    How much would the parts cost to do this to my 06 gs 300 awd?

  • @Jdmjas
    @Jdmjas3 жыл бұрын

    can't go wrong with a smoke break

  • @jeffersonbagain8358
    @jeffersonbagain83583 жыл бұрын

    whered you get that intake

  • @Mattscalf
    @Mattscalf2 жыл бұрын

    What turbo kit is that?

  • @airmaxplz
    @airmaxplz4 жыл бұрын

    Props bro. Excited to see you add fuel mods to this 👍🏼

  • @DhatLex

    @DhatLex

    4 жыл бұрын

    You and me both!

  • @dreadsmitdrift1738
    @dreadsmitdrift17384 жыл бұрын

    Love the build. Are you runnig gte piston and rod or just the stock ge pistions and rods?

  • @DhatLex

    @DhatLex

    4 жыл бұрын

    DreadsmitDrift Thanks!!! Stock GE VVTI. I’ll be upgrading internals next year, hopefully

  • @sho1337_
    @sho1337_3 жыл бұрын

    How many miles was on the gs300 when boosting it?? I have a 232k gs300 and idk if I should boost it. I know the motor is health but that’s a lot of miles

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    Kan 1337 235K

  • @MRMAN-wb1tv

    @MRMAN-wb1tv

    2 жыл бұрын

    @@DhatLex Damn! I have 3 gs300's 04 124k, '00 ( #10 built ) 170k, and '02 with 175k. Thinking of playing with the 02 since it's the one I don't really care about lol.

  • @boostedangel8780
    @boostedangel87803 жыл бұрын

    Nice man have a question what turbo manifold did you buy ?

  • @jason-le4ke

    @jason-le4ke

    3 жыл бұрын

    Cx racing

  • @aedangilman9329
    @aedangilman93293 жыл бұрын

    what kit is this im looking for a kit to do just this and still be reliable without dropping a brick to upgrade fueling and internals

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    It’s a kit I pieced together myself. I am going to do a follow up video, just wanted to test everything out, and give you guys a true review on my setup. Like, subscribe, and stay tune!

  • @d4vincii_projects70
    @d4vincii_projects702 жыл бұрын

    I am aware that in this video you are on stock fueling systems. May I ask if you are running an afr guage? If so what kind of ratios are you running? Idle, mid throttle/low boost, and WOT/full boost. I’m currently troubleshooting my build which is very similar so any feedback is awesome and very appreciated. I love your build and will continue to support

  • @d4vincii_projects70

    @d4vincii_projects70

    2 жыл бұрын

    And if possible what gate pressure are you running and what actual boost number are you hitting?

  • @mrwino9730
    @mrwino97303 жыл бұрын

    I have this same exact game and was wanting to start putting things into it, but I’m just not sure what parts to purchase. Any tips?

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    Do your research before you buy anything

  • @EliteWarriorRace
    @EliteWarriorRace Жыл бұрын

    Hey brother, quick question, I noticed you had the oil pan tapped with a fitting welded, so you never tapped the actual oil sump? Have you had any problems with that? I planned on doing the same for my IS, but my other turbo friends said that wouldn’t work.

  • @DhatLex

    @DhatLex

    Жыл бұрын

    Tap the oil sump.

  • @V7Cameron
    @V7Cameron3 жыл бұрын

    On a scale of 1-10 how easy was it to install? I plan on doing this to my SC

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    Honesty the install for me was easy, the R&D is what was hard, and costly. For you with the SC300, I believe they only came non Vvti if I’m not mistaken. The only thing I can think of is the distributor cap getting in the way, but I believe you can work around it, or do a distributor delete. I haven’t done this in a SC300 so I can’t really say much on that platform.

  • @SkrillaHandler
    @SkrillaHandler3 жыл бұрын

    did anyone notice the first whole minute was synced to the beat that shit had me trippin

  • @elfasboat3012
    @elfasboat30123 жыл бұрын

    Love the build but quick question how much psi are you running

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    🙏🏽 I’m running a 4PSI spring. I have a Greddy Boost controller wired up, it’s just not plumbed to the solenoid

  • @Jaykiller04171998
    @Jaykiller041719983 жыл бұрын

    what turbo kit did you use i just built my motor for a turbo and not sure which one to get

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    It’s a kit I pieced together. I’ll have a update video soon. To answer questions a lot of people have been asking.

  • @2GSVVS

    @2GSVVS

    3 жыл бұрын

    same cant wait for the vid i have no idea what turbo to get

  • @shnuzi9280
    @shnuzi92803 жыл бұрын

    Have you had any problems so far with stock internals?

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    No problems with the internals. Again It’s not like I’m running tons of boost either

  • @1028entllc
    @1028entllc3 жыл бұрын

    What kind of turbo

  • @MarkSmith-ot3ne
    @MarkSmith-ot3ne2 жыл бұрын

    0-60 now?

  • @Tech_Guy_87
    @Tech_Guy_873 жыл бұрын

    How much did you spend for the turbo kit?

  • @jason-le4ke

    @jason-le4ke

    3 жыл бұрын

    He said its a custome kit made by him so i guess it could be around 2k to 5k

  • @atombomb6207
    @atombomb620711 ай бұрын

    bro the dog in the window at 3:30 has me dead

  • @DhatLex

    @DhatLex

    11 ай бұрын

    😂

  • @ssjdavid
    @ssjdavid2 жыл бұрын

    Bro I have watched this video like 4x now I decided to order an XS turbo kit and run it on the stock ECU like you did with low boost, can’t believe these 4000 pound cars have 180WHP 😂 Feels like I’m about to die merging sometimes lol let’s fix that !

  • @DhatLex

    @DhatLex

    2 жыл бұрын

    @@ssjdavid appreciate it, just make sure you do the fuel return mod, with a rising rate fuel pressure regulator.

  • @ssjdavid

    @ssjdavid

    2 жыл бұрын

    @@DhatLex hey bro did you have any issues with misfiring? I’m getting them in Cylinders 1-3 and VSC is stuck on I already changed spark plugs

  • @DhatLex

    @DhatLex

    2 жыл бұрын

    @@ssjdavid did you check for any vacuum leaks, have you checked your O2 sensors? What fault code did you get?

  • @DhatLex

    @DhatLex

    2 жыл бұрын

    @@ssjdavid also check your coil packs and inspect the wiring

  • @ssjdavid

    @ssjdavid

    2 жыл бұрын

    @@DhatLex turns out my battery terminal had buildup on it and it wasn’t making a good connection. Misfiring is solved but still trying to get afrs right other then that the car is superb.

  • @GasBrakeSim
    @GasBrakeSim2 күн бұрын

    Nice build bro. Did you do the Alluminum piping work?

  • @DhatLex

    @DhatLex

    2 күн бұрын

    @@GasBrakeSim naw I had someone fab it up for me. Back then I didn’t know how to fab, now I do 😂

  • @fazjewls14
    @fazjewls143 жыл бұрын

    I have a 2001 gs300. I'm looking for the same thing a mild turbo kit . Here In Texas gets crazy hot so want my engine cool . Where can I find this turbo kit? Thanks bro and car looks awesome. 👍👊💪

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    Thanks bro 💯 I pieced everything together, and I had a shop fabricate my intercooler piping. This is a one off setup. You’re going to have to piece your own setup, or buy a kit. If you google GS300 turbo kit, they should pop up. Or you can look up 2JZGE Turbo Kit, but you might have to tweak it to get it to fit and work properly on your platform since it’d be a general 2JZGE Turbo kit. Hope this helped and good luck!!!

  • @chrisrey360
    @chrisrey3603 жыл бұрын

    How much horsepower do you think you're running? maybe something like 250rwhp?

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    Idk, I raced a WRX and beat it. I raced a V6 accord and beat it. I also raced a V8 Cherokee and won. I did think it made 250-265whp but I really don’t know. Hella factors come into play. Hopefully I can free up some extra funds to get some proper dyno runs, and tune in.

  • @MRMAN-wb1tv
    @MRMAN-wb1tv2 жыл бұрын

    *Dear GTE fan boys that have driven up the price of the 2jz, THIS IS THE SAME BLOCK MINUS THE OIL SQUIRTER. Everything else is fairly easy to upgrade*

  • @chaos_3380
    @chaos_33803 жыл бұрын

    Yerrr is this a Aristo swap? Or na-t? I can’t wait for the warmer weather I got so many parts just chillin waiting to be installed on my 03

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    Bro it’s NA-T you’d definitely know if I swapped a GTE in there. Good luck with the 03 and happy boosting!

  • @connordavid5088
    @connordavid50883 жыл бұрын

    Hey bro did u you upgrade your fuel system at all?

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    Nope completely stock. Saving money for fuel system now.

  • @DBolt-xb7sg
    @DBolt-xb7sg3 жыл бұрын

    Where did you run the oil lines for the turbo?

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    The feed is ran from a oil filter sandwich plate adapter, and tucked underneath the engine cover. The return is ran to the oil pan

  • @FKtooswavey
    @FKtooswavey3 жыл бұрын

    Dog in the back at 3:25 🤣🤣🤣

  • @alexhanda749
    @alexhanda7493 жыл бұрын

    Sounds very nice but just wandering if it was mapped already when you recorded it?

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    Naw it’s running on on the stock ecu. The piggyback isn’t installed yet.

  • @alvinheu

    @alvinheu

    3 жыл бұрын

    @@DhatLex how long have u had it on the stock ecu? any issues so far on low boost? how about the 02 sensors?

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    @@alvinheu I haven’t noticed any issues, and as far as O2 sensors you’re gonna wanna run them but use a O2 spacer on the monitor sensors. That would help with keeping the cel light off

  • @ciciflame
    @ciciflame Жыл бұрын

    how much did it cost i know nothing but i gave a 2001 gs300 and i wish it was faster 😢

  • @DhatLex

    @DhatLex

    Жыл бұрын

    At the time about $1800 give or take. Now, it’ll probably be closer to $2800 give or take, & that’s if you’re doing the work.

  • @UnrulyVlogzz
    @UnrulyVlogzz3 жыл бұрын

    What turbo kit are you running

  • @jxrioss21

    @jxrioss21

    3 жыл бұрын

    He mentioned it on the first comment

  • @UnrulyVlogzz

    @UnrulyVlogzz

    3 жыл бұрын

    @@jxrioss21 oh shit I’m blind thx bro😂

  • @projecttuning4453
    @projecttuning44533 жыл бұрын

    I seen yu got a rev 9 turbo I cant fit a v band on it. Was there a specific v band yu put ?

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    Paisa Style Nope, just a regular V band

  • @projecttuning4453

    @projecttuning4453

    3 жыл бұрын

    3 inch v band ?

  • @Tuforeal
    @Tuforeal Жыл бұрын

    Did you change the head gasket or head studs or just leave it be? How has it been with running around 5psi?

  • @DhatLex

    @DhatLex

    Жыл бұрын

    Nope left everything unopened. She’s been running fine. So Far put about 25k miles on her.

  • @Cplink420

    @Cplink420

    11 ай бұрын

    @@DhatLex Did you ever put fuelpressure regulator in it?

  • @Chijyd
    @Chijyd3 жыл бұрын

    Top speed now? 0-60 in how many seconds after the kit?

  • @raullorenzdalope5098
    @raullorenzdalope509810 ай бұрын

    Did u tune it after install the turbo

  • @DhatLex

    @DhatLex

    10 ай бұрын

    Nope, you can follow the build, still going strong ig is Dhatlex and car club is Lexus Legends

  • @PH020
    @PH0204 жыл бұрын

    hellyea stage 1 turbo setup! you just motivated me to boost my GS300, noticed we dont have to relocated ABS like the IS300 guys have to do to! im guessing your running stock ecu under 10psi? my question is do you still have all 4 o2 sensors hooked up? if so where do you have them located?

  • @DhatLex

    @DhatLex

    4 жыл бұрын

    I converted B2s1 into B1S1. So I only have one o2 hooked hooked up to the down pipe.

  • @musicindustrydrama838
    @musicindustrydrama8382 жыл бұрын

    Did you tune it on stock ecu?

  • @DhatLex

    @DhatLex

    2 жыл бұрын

    Nope, can’t tune Toyota ECU, they’re locked.

  • @sufyaanahmed6552
    @sufyaanahmed65523 жыл бұрын

    After 5 months how is it holding up?

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    She still running strong. Y’all can follow her progress on IG dhatlex

  • @Dzevita09
    @Dzevita094 жыл бұрын

    Stok ge pistons & rods?

  • @DhatLex

    @DhatLex

    4 жыл бұрын

    zura matiashvili yessir. Doing a rebuild next year!

  • @shadmanzaman1247
    @shadmanzaman12473 жыл бұрын

    This has the original 2JZ-GE right? Is this the VVTI or non-VVTI motor

  • @jason-le4ke

    @jason-le4ke

    3 жыл бұрын

    Vvti

  • @shadmanzaman1247

    @shadmanzaman1247

    3 жыл бұрын

    @@jason-le4ke are the vvti's better for turbo builds

  • @jason-le4ke

    @jason-le4ke

    3 жыл бұрын

    @@shadmanzaman1247 in my opinion yes

  • @thomasdavidson7367
    @thomasdavidson73672 жыл бұрын

    Straight pipe?

  • @DhatLex

    @DhatLex

    2 жыл бұрын

    Catless, with a GReddy Catback

  • @blistic3000
    @blistic30003 жыл бұрын

    What exhaust is that

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    Greddy Evo2 I believe

  • @okistash3075
    @okistash30752 жыл бұрын

    That section you put your maf in.... where did you get it??

  • @DhatLex

    @DhatLex

    2 жыл бұрын

    Part is off of my old HPS intake, just had my fabricator weld it in.

  • @okistash3075

    @okistash3075

    2 жыл бұрын

    @@DhatLex df and it didn’t throw off your fuel tables?

  • @DhatLex

    @DhatLex

    2 жыл бұрын

    @@okistash3075 naw it’s the same size as the stock housing.

  • @okistash3075

    @okistash3075

    2 жыл бұрын

    I found your amazon review on the turbo lol did the second one leak?

  • @tariqwalker81
    @tariqwalker813 жыл бұрын

    What turbo kit is this

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    Tariq Walker custom kit pieced together by myself

  • @BroShed69
    @BroShed693 жыл бұрын

    Is this trustworthy enough to do too a daily driven gs300?

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    I daily my car except for the winter. Most of the issues I had was because of trying to keep every “budget” friendly. Cheaping out on fittings and some parts. Honestly it’s really a question of whether or not you trust your skills and knowledge.

  • @BroShed69

    @BroShed69

    3 жыл бұрын

    @@DhatLexI live in Australia so I'm sure temp won't really be a problem, I guess it's just up to my wallet :(

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    @@BroShed69 yeah you’re going to want to run good oil cooler and transmission cooler. Run a new radiator, you know proper heat management. Just buy stuff bit by bit and install once you have everything. I was stacking up on parts for awhile before I actually did the install. Still a couple more things I want to install before I feel it’s perfect. But don’t give up and plan out everything you’re going to do.

  • @ryandabeast1
    @ryandabeast12 жыл бұрын

    This is exactly what I needed to see. Do you have a wideband hooked up? I picked up a kit for my is300 and was looking into a return setup but if your gs runs in the safe range with the factory fuel regulator I may skip that step for now. Not looking for a ton of boost just want to get the kit installed so its not collecting dust. I like the 4psi spring idea. I've never had a boosted car just been watching a pile of videos to see what im getting into

  • @DhatLex

    @DhatLex

    2 жыл бұрын

    I’d run the fuel return mod along with a RFPR. Better to get everything out of the way, so you don’t have to keep going back. Get a piggyback and a nice light tune so everything is good and you don’t really have to worry about anything.

  • @ryandabeast1

    @ryandabeast1

    2 жыл бұрын

    @@DhatLex what is an rfpr? sorry for my lack of knowledge. Is It technically safe to just run 4 psi without it and the return

  • @DhatLex

    @DhatLex

    2 жыл бұрын

    @@ryandabeast1 raising rate fuel pressure regulator, and you’ll want to run the fuel return mod with it.

  • @cop2506
    @cop2506 Жыл бұрын

    Wow I wish I was able to do this. Lol I’m too scared to blow shit ip

  • @la_siguaRd
    @la_siguaRd8 ай бұрын

    how many horsepower?

  • @DhatLex

    @DhatLex

    8 ай бұрын

    Idk, but I did race a stock GTE and won

  • @la_siguaRd

    @la_siguaRd

    8 ай бұрын

    @@DhatLex How much did you spend to make it turbo everything you put in it?

  • @DhatLex

    @DhatLex

    7 ай бұрын

    @@la_siguaRd I don’t remember, it’s somewhere in the comments.

  • @ao8271
    @ao82713 жыл бұрын

    Any problems with the car yet?

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    Nope. I daily to work everyday with her. Just planning The fuel setup, right now.

  • @ao8271

    @ao8271

    3 жыл бұрын

    @@DhatLex thats sick bro. 💯🤙🏾

  • @mrkouki180sx
    @mrkouki180sx2 жыл бұрын

    that was wrong place to tap into the pan you need to drill into the aluminum upper pan you need to be above the oil level otherwise the oil drain can back up and blow out the oil seal in your turbo

  • @DhatLex

    @DhatLex

    2 жыл бұрын

    I got it running into a scavenging pump. I do plan on tapping into the upper oil pan. Initially this was my first time and I was scared of drilling into my oil pan, but I’ve done it a couple times now 😂 appreciate the info tho

  • @mrkouki180sx

    @mrkouki180sx

    2 жыл бұрын

    @@DhatLex i can weld a fitting onto one of the many upper oil pans i have and sell it to you

  • @DhatLex

    @DhatLex

    2 жыл бұрын

    @@mrkouki180sx I’ll either do it myself or have my homie do it. Goodlooking out though

  • @nickvasquez7819
    @nickvasquez78193 жыл бұрын

    Hmm... The fuel system is even stock? I thought it needed a fuel return line

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    Jeremy Wu xi nope. Once you start to go above 8PSI then you’ll want to run a return

  • @yousufahmed4732
    @yousufahmed47323 жыл бұрын

    is it still an automatic? if so how much power do you think it could handle?

  • @ChefNorrawitJ

    @ChefNorrawitJ

    3 жыл бұрын

    350 is Max that the stock transmission can take

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    @@ChefNorrawitJ From what I heard and seen, they’re good for 400-450RWHP (Healthy transmission) but I don’t go by HP because torque and RPM is what destroys the A650E.

  • @ChefNorrawitJ

    @ChefNorrawitJ

    3 жыл бұрын

    @@DhatLex just gotta watch that 3rd gear

  • @jeffersonbagain8358
    @jeffersonbagain83583 жыл бұрын

    no mods on pump injectors?

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    Stock fuel system. I plan on upgrading the rail, FPR, & FPD. God willing this Spring

  • @motoengineer8671

    @motoengineer8671

    3 жыл бұрын

    Hey dhat lex, did you upgrade the ecu? I got the same engine and did a cxracing kit but haven’t run mine in the street yet.

  • @motoengineer8671

    @motoengineer8671

    3 жыл бұрын

    Everything is stock internals on mine also. Sweet pulls

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    @@motoengineer8671 I have a Greddy piggyback and a boomslang harness, just never installed it yet. I want to do my fuel upgrades first then get the tune, that’s why I’m running a 4PSI WG spring. It’s enough for you to notice but it’s not too much for the stock ecu to handle with a RFPR. Honestly before you run it on the street do the fuel line return mod and upgrade the fuel pressure regulator. Our stock fuel pressure regulator can’t really do much once you go pass 0PSI, it’s not designed to see boost.

  • @motoengineer8671

    @motoengineer8671

    3 жыл бұрын

    @@DhatLex thanks!

  • @ddosip-422
    @ddosip-4222 жыл бұрын

    Intercooler link ?

  • @DhatLex

    @DhatLex

    2 жыл бұрын

    TBH bro I’d recommend going with a Mishimoto 3in setup. That’s what I plan to upgrade to

  • @ddosip-422

    @ddosip-422

    2 жыл бұрын

    @@DhatLex any tunes ?

  • @matthewjohnson4328
    @matthewjohnson4328 Жыл бұрын

    careful with the piston rods . I know youre only making like 300whp but still. Just got a 2001 with 89k miles in mint condition, leather still smells new

  • @bluesky-ud9wg

    @bluesky-ud9wg

    Жыл бұрын

    All 2j's rods along with the crank are Forged, it's the pistons along with the 10.5 cr that are the concerns.

  • @matthewjohnson4328

    @matthewjohnson4328

    Жыл бұрын

    @@bluesky-ud9wg ah gotcha

  • @Asbo2JZ

    @Asbo2JZ

    12 күн бұрын

    @@bluesky-ud9wg So lower the compression and should be mint? I’m trying to save up and boost mine cuz it’s pretty down on power and I want it to be a bit of a sleeper just so it has some kinda purpose cuz atm it’s not really good at anything but I don’t wanna get rid of it cuz I think it’s kinda cool having something with a 2jz at 22 years old lol

  • @mikeymartins388
    @mikeymartins3884 жыл бұрын

    could you tell me the parts you used for all this? The intake, turbo, etc..? Thanks man, really appreciate you

  • @mikeymartins388

    @mikeymartins388

    4 жыл бұрын

    Dhat Lex just stock?! I’m confused lol... what turbo? And liked and subscribed too 👍🏼👍🏼 tryna turbo my Gs too

  • @DhatLex

    @DhatLex

    4 жыл бұрын

    Mikey Martins I’m sorry bro. I gotta Rev9 turbo. A PowerGo MotorSports schedule 40 2JZGE manifold. XS power down and mid pipe, custom intercooler setup, GReddy FV limited Version BOV, XS power 50mm wastegate, no intake but I do have an autozone spectre air filter, and a GReddy Revolution catback (already had that) as far as the internals, and fuel all that is stock.

  • @DhatLex

    @DhatLex

    4 жыл бұрын

    Also thank you for the support. I’ll try to make another video showing what I brought.

  • @HerbTheSneakerBear

    @HerbTheSneakerBear

    4 жыл бұрын

    Did you keep ac and ps?

  • @DhatLex

    @DhatLex

    4 жыл бұрын

    Herbert Barringer yep gotta have my AC and power steering!

  • @ssteam-lw5pi
    @ssteam-lw5pi2 жыл бұрын

    how much did it cost you to turbo it? i want to turbo my gs300

  • @DhatLex

    @DhatLex

    2 жыл бұрын

    Including my GReddy EBC, & Innovate Wideband, about $2-2500 and that’s on the low side. I also brought my stuff before the recent inflation, some items I had before Covid.

  • @DarienCharlton
    @DarienCharlton4 жыл бұрын

    How much boost?

  • @DhatLex

    @DhatLex

    4 жыл бұрын

    Wastegate is 4PSI high boost is 6PSI. The ecu can adjust up to 7 psi but I cap it at 6 until I can get a tune. Then I’ll turn up. Rather be safe then sorry 😂

  • @DarienCharlton

    @DarienCharlton

    4 жыл бұрын

    @@DhatLex Oh what ecu are you using bro?

  • @DhatLex

    @DhatLex

    4 жыл бұрын

    Minor stock 2JZGE VVTI ECU

  • @DhatLex

    @DhatLex

    4 жыл бұрын

    Minor I plan on running MAPECU3

  • @user-bv6qt1pl8g
    @user-bv6qt1pl8g7 ай бұрын

    Бро, напиши пожалуйста что нужно установить по подробней как у тебя

  • @DhatLex

    @DhatLex

    7 ай бұрын

    В моем новейшем видео есть список деталей в описании

  • @marioalvarez9143
    @marioalvarez91433 жыл бұрын

    Whats ur exhaust setup?

  • @DhatLex

    @DhatLex

    3 жыл бұрын

    GReddy Evo2

  • @totsamuy2693
    @totsamuy26933 жыл бұрын

    Еле еле тянет бедняга

Келесі