Grundig TK149 Belt Replacement

Ғылым және технология

It's always annoying when a belt snaps on a reel-to-reel machine.
Some of them are surprisingly easy to replace, but many are a nightmare.
This one is somewhere in between. With a little patience, it can be done within maybe half an hour.
To save you some of the mistakes I made, I uploaded this video to show, what you'll have to expect on a TK149.

Пікірлер: 40

  • @user-wm5ic5le1t
    @user-wm5ic5le1t3 жыл бұрын

    It is wrong method to replace the belt and defecult.thr right method from the back (bottom cover) u will find entrance to the motor belt cover 15:48 under the speaker .remove the 2 screw and install the belts.thats all.

  • @AstraWerke

    @AstraWerke

    3 жыл бұрын

    You may be able to change the tape counter belt that way, but how would you get the drive belt around the flywheel without taking the axle out of at least one of the bearings?

  • @user-wm5ic5le1t

    @user-wm5ic5le1t

    3 жыл бұрын

    @@AstraWerke remove the 2 scre and u will find it is easy to install the belt aroun the weel.i do it evry time when the belt cut

  • @user-wm5ic5le1t

    @user-wm5ic5le1t

    3 жыл бұрын

    @@AstraWerke 15:48 u will find small iron cover with 2 screw blow the speaker directly.remove and install belts arround the axe

  • @AstraWerke

    @AstraWerke

    3 жыл бұрын

    @@user-wm5ic5le1t My god, I wish I had known that before... Well, when the belt rips again, I know what to do - thank you!

  • @AstraWerke

    @AstraWerke

    3 жыл бұрын

    @@user-wm5ic5le1t Well, the engineers back then were alot smarter than me xD Thanks alot for pointing it out!

  • @28gwdavies
    @28gwdavies3 жыл бұрын

    Brought back a lot of memories from the 70's when I was a TV Engineer, the City and Guilds Examination also covered Radio and Tape Recorders. Many a happy hour pulling these apart, repairing and then re-assembling. If memory serves me right, the PCF valve (tube) is for generating the high frequency for the erase head and carrier frequency when recording... good old days... now everything is done with one chip, bring back the seventies I say!

  • @user-ne2vy9if9x
    @user-ne2vy9if9x3 жыл бұрын

    You have a lot of patience dude !!!!!! very detailed work in a priceless audio machine. WELL DONE !

  • @AstraWerke

    @AstraWerke

    3 жыл бұрын

    Thanks :D

  • @jd3552
    @jd35523 жыл бұрын

    Excellent content, it's just like assembling a clock movement! Start from one end and proceed. Radio horology.

  • @alexbeaulieu9074
    @alexbeaulieu90743 жыл бұрын

    thank you for this i have a tk 146 which is similar this is a big help to me hello from Canada

  • @AstraWerke

    @AstraWerke

    3 жыл бұрын

    Well, I'm glad I could help! :D

  • @waltermelyon4300
    @waltermelyon43003 жыл бұрын

    Repair is a beautiful word.

  • @alexbeaulieu9074

    @alexbeaulieu9074

    3 жыл бұрын

    oh yes it is

  • @sheep1ewe
    @sheep1ewe3 жыл бұрын

    Awsome! Great instructions!

  • @AstraWerke

    @AstraWerke

    3 жыл бұрын

    Thanks :D

  • @jaykay67design
    @jaykay67design3 жыл бұрын

    Classic Grundig design and and tidy inside

  • @kalyankumarsen8604
    @kalyankumarsen860411 ай бұрын

    A nice and tidious job done sucessfully I have a Telefunken tape recorder model no Magenotphon 96 though electronics has somehow been done but I did'nt find the flat rubber belt for the motor and the fabric lined flat belt for the flywheel will you kindly give some information where from I may get the belts . Thank you for uploading the video waiting eagerly for your kind reply .

  • @timescoffery7662
    @timescoffery7662 Жыл бұрын

    Great video. Could you help me with instructions on how to replace the drive belt on a Grundig TK55 recorder.

  • @shakilrana2868
    @shakilrana2868 Жыл бұрын

    You are great

  • @hannah9418
    @hannah9418 Жыл бұрын

    Where do you suggest getting new belts for these old Grundigs? I have an SO 171 console unit i'm trying to get working just so I can get the tape to tape running and pull some old audio recordings of a late relative. I managed to get power to the tape unit and it's spinning up but i need 2 belts, not sure how to measure/spec (tightness level) or where to source these custom o-rings

  • @AstraWerke

    @AstraWerke

    Жыл бұрын

    Just type the make and model into ebay, you ought to find something.

  • @h.n.jahangiri
    @h.n.jahangiriАй бұрын

    Hallo How and where can I buy the belt of this model, please guide me, thanks

  • @AstraWerke

    @AstraWerke

    Ай бұрын

    They're sold via ebay :)

  • @frankmuller985
    @frankmuller9852 жыл бұрын

    völlig falsch!! Der Riemen wird von unten gewechselt. totally wrong!! The belt is changed from below.

  • @chrisbergner7077

    @chrisbergner7077

    Жыл бұрын

    You're absolutely right ! Never loosen the chassis for changing the belt !!!!!!!!!!!!

  • @jonvincentmusic
    @jonvincentmusic2 жыл бұрын

    Pretty sure you’re supposed to do it from underneath so the whole mechanism doesn’t fall apart like a clock movement.

  • @selmansenkalp

    @selmansenkalp

    Жыл бұрын

    There is no space underneath to operate.

  • @KresimirPrelec
    @KresimirPrelec6 ай бұрын

    super

  • @lizj4101
    @lizj41013 жыл бұрын

    Can you tell me how this TK149 records? I have one but can't get it to record!

  • @AstraWerke

    @AstraWerke

    3 жыл бұрын

    There is a knob on the left of the top face. Select between "Automatik Sprache/Automatik Musik/Manuell/Trick" what you want to record (Speech, Music, custom) by twisting, then press the knob down and switch the lever on the right to "Start" simultaneously.

  • @lizj4101

    @lizj4101

    3 жыл бұрын

    @@AstraWerke thank you I will try that! Amazing many thanks.

  • @sencer-sari
    @sencer-sari3 жыл бұрын

    2 other belts were existing but not shown how to change at this video

  • @shakilrana2868
    @shakilrana2868 Жыл бұрын

    I want belt

  • @barryaustin1544
    @barryaustin1544 Жыл бұрын

    Much easier from below… remove the plate holding the lower flywheel holding point

  • @PAL25FPS

    @PAL25FPS

    Жыл бұрын

    can you albert? explain? i have TK 145 i need to this on

  • @user-wm6kv5io6z
    @user-wm6kv5io6z Жыл бұрын

    ΕΧΩ ΕΝΑ ΤΚ146 ΤΟ ΕΔΩΣΑ ΓΙΑ ΔΙΟΡΘΩΜΑ ΚΑΙ ΜΟΥ ΤΟ ΕΦΕΡΑΝ ΜΕΤΑ ΑΠΟ ΚΑΙΡΟ ΔΙΑΛΥΜΕΝΟ ΜΠΟΡΕΙΤΕ ΝΑ ΜΟΥ ΠΕΙΤΕ ΠΟΣΟΥΣ ΙΜΑΝΤΕΣ ΕΧΕΙ ΝΑ ΨΑΞΩ ΝΑ ΒΡΩ

  • @manuelperezbarranco9354
    @manuelperezbarranco93543 жыл бұрын

    En español

  • @manuelperezbarranco9354

    @manuelperezbarranco9354

    3 жыл бұрын

    Qué hablen en español

Келесі