"They do say what doesn't kill you makes you stronger. But no one ever seems to mention how it chips away at your sanity." This is the real-world experience you don't get on other channels.

@Psikeomega

Жыл бұрын

I think you can recycle sanity chips. Not into more sanity, but like sell it for art glitter or something

@bdkj3e

Жыл бұрын

Step 1: break sanity into bite sized chips Step 2: ?????????? Step 3: profit!

@Psikeomega

Жыл бұрын

@@bdkj3e "eating sanity" starts getting into some lovecraftian or dungeons and dragons level stuff... Possibly both. Additional research is required

@deejayy2k

Жыл бұрын

what doesn't kill you... gives you unhealthy coping mechanisms.

@MumrikDK

Жыл бұрын

I usually say it leaves you scarred and diminished.

I know. I know. I am watching yet another chain saw video by ToT. What Tony doesn't realize is that I could care less about chain saws, but listening to Tony's hands tell us what is going on is what brings me here and gets me to stay, and even watch again.

@stupot_64

Жыл бұрын

@@Pauru74 Nope. He cares a lot, so could care less.

@guatf1

Жыл бұрын

Doesn't really matter what he talks about, just listening to his voice is a pleasure

@galaxybrian8039

Жыл бұрын

@@stupot_64 “could care less” means that you DO care somewhat. COULDNT care less means even if you tried, you would not be able to care less which means your level of care is zero. if you “care level” is ANYTHING above zero, then yes, you “could care less” i don’t understand what is so difficult about this very basic statement for so many people to understand.

@stupot_64

Жыл бұрын

@@galaxybrian8039 As I said "he cares a lot" so he could easily "care less"

@rickarderlandsson5906

Жыл бұрын

@All 4 Espi How much would you say you care about chainsaws on a scale from 0-100?

Loved the After-After comparison, really focuses the difference between after sharpening and before it gets dull again.

@JoriDiculous

7 ай бұрын

That is truly the only comparison that's important.

It’s ridiculous how long I’ve been watching Tony and how I still get excited like an 8 year old in a candy store whenever a new vidya pops ip

@prityboy69r

Жыл бұрын

i dont believe you have ever sharpened a chain. you just ruined that chain by sharpening it backward.

@kevinhanna9440

Жыл бұрын

Yeah me too. LOL, it has been about a year and I came across this by accident. I didn't even know what the subject was or that it was TOT. But when I saw the "HANDS".. I knew I was in it for a spell.... 🙂 Thanks as always Tony....

Before hand filing, mount an overhead green laser to the angle you want to file at. It won't help much, but will sure make filing more fun. 👍

@feynthefallen

Жыл бұрын

Lasers make everything better. And bacon. You can never go wrong adding lasers or bacon.

@unglud

Жыл бұрын

@@feynthefallen and magnets!

@rafavillasboas

Жыл бұрын

​@@unglud and Banana Boat song on the radio.

@dairiskuznecovs7233

Жыл бұрын

@@feynthefallen why not go a step further laser bacon

@davydmir6565

Жыл бұрын

​@Dairis Kuznecovs now we're cooking!

"whether is here in the garage or out at the club, i enjoy grinding" - This Old Tony 2023 - This guy is a f'in lyrical wordsmith

@jamespfp

Жыл бұрын

Srsly, needs a Superhero Franchise, right? "Bump and Grind"

@bobnoble6476

11 ай бұрын

This man is also using his chain saw to make a wood/metal hanger @27:30, so he's kinda a legend.

"Live, learn, forget, learn again. That's my way." As a cantankerous middle-aged (former) chainsaw user, I appreciate the truth in these words.

I worked for Oregon Tool in the Machine Design Dept, designing the chain assembly/grinding machines. I learned SO MUCH about chain cutter geometry in the short time I was there and it’s fun to see it talked about again :-)

@micahreid5553

11 ай бұрын

Hate to admit it but I have an irrational dislike for Oregon Tool only because when i worked at FedEx they were really heavy and awkward boxes to move around since they were so dense

@slurryz

5 ай бұрын

I used to service the little CNC machines they had retrofitted to perform the actual grinding. I was always fascinated by the automation y'all had designed to get the individual teeth loaded into that machine. Hopefully they're no longer using salt-water as a grinding medium...

I don't even own a chainsaw and I'm still here watching these. But boy am I prepared when I get one!

@mikedrop4421

Жыл бұрын

Ehhh, I don't own a welder or a mill but I've watched every welding video he's done. Nobody is judging you around here.

@robllewellyn

Жыл бұрын

I don’t own a mill a lathe a surface grinder or a welder. And I’m here anyway!!!

@FOG-321

Жыл бұрын

Every man should own a chainsaw. Even if it's a small one ya never use 😁

@jjock3239

Жыл бұрын

I guess what you are stating, because I own all those tools, and am wondering why in heaven did I watch this?

@csn583

Жыл бұрын

Move somewhere you actually need one and you'll learn right quick.

Could I confess something, Tony? I only get my chainsaw out every two or three years and I thought that when the blade went dull, you either bought a new one or found a professional to re-sharpen the old blade. Then, one day, I was buying a new saw chain and saw that the shop had a sharpening kit. IIRC it was less than £20 - essentially a file and a guide and a leaflet in a plastic wallet. Fortunately, I never throw anything out, so I have a dozen blunt blades and I can now re-use them all. For an occasional user, like me, I don't see the point of buying a grinder. The file and the guide let me bring the chain back to life in five minutes. I'll probably die before I use up my store of old blades. Possibly by bleeding out of my femoral artery.

@1pcfred

Жыл бұрын

A chainsaw grinder is not for the casual user. The one here is $500ish.

@nicholashacking381

Жыл бұрын

@@1pcfred Eek! That's more than I paid for my chainsaw!

@1pcfred

Жыл бұрын

@@nicholashacking381 there's cheaper brands out there. Some are very cheap. They may suffer from some of the problems that ToT was expecting though.

@boots7859

Жыл бұрын

You can get a cheap dremel attachment IIRC, that works pretty well. I think I saw someone using one of the grinding stones shaped like a dowel that worked like the round file except rotating vs back and forth.

@Ewr42

Жыл бұрын

​@@1pcfred why not machine a structure to strap in a normal grinder? Make it bulky and tight or even destroy the old grinder in the process to make it sturdier. either way seems cheaper(and cooler) than spending 500$ on a fancy(overpriced) mounting vice with a grinder attached to it

The "after" and "after" shots really showed the difference between the dull chain and the freshly sharpened one! I almost couldn't believe the difference!!! wow! 😍😍😍 I wonder what the "before" and "before" comparison would be....

@Fix_It_Again_Tony

Жыл бұрын

The after/after comparison: for when you don't think to take a before shot.

I have owned the more common “Little Brother” to your fancy version for about 25 years. There’s no going back once you figure them out and get good at using them. You’ll want to get yourself a chain breaker and rivet spinner and a 100 foot coil of chain. Then make up several chains , use each one until they’re dull and then you set up your grinder for one side of the chain and sharpen, for instance, all your left-side teeth. Then change your grinder to right-side teeth and sharpen all of those. Then if your rakers need attention set it up for raker grinding. Take small cuts on the teeth. It doesn’t take much. Once you get used to the machine the consistency will be there. You’re going to love this machine - I promise. I have several short vids on my channel. Check them out if you’re so inclined.

@gregorymacneil2836

10 ай бұрын

I agree on the chain breaker, rivet spinner and 100 foot roll of chain - huge cost and time saving. Baileys Online have a WoodlandPRO Chain Measuring Chart that is a great if you work from 100 foot rolls.

I didn't click on a chainsaw sharpening video, I clicked on a This Old Tony video.

@ryanh.8896

Жыл бұрын

This is exactly how I feel!!!

@Fix_It_Again_Tony

Жыл бұрын

Seriously, his videos could be about anything and I would always find myself better informed and well entertained afterwards.

Tony, it is actually us who enjoy your company and, in the recesses of our machine oil-stained souls, yearn for it. You've put a caption on the screen for people who want to skip ahead. May I just politely and with all respect laugh in your face? I guarantee you, there is no one who would do that! Yes, we learn about things from you and your videos are full of practical advice and machinist's wisdom, but there is a secret reason we all watch you. We love your company and we want to hear your voice and laugh and forget our worries for that short time we can spend with your virtual self. Thank you for all you bring to this world, Tony!

@captcarlos

Жыл бұрын

Oh how true. You hooked me with your statement. Wouldn't we all want a friend like TOT....

@bradyoung6663

Жыл бұрын

Amen to that, Dude.

@mtnvortex

Жыл бұрын

No. While your viewership and enthusiasm is very much appreciated, Tony already told you several times, sir! He will not send you a pair of his soiled gym socks. Also, your idea regarding the release of an annual calendar will be taken into consideration, though the pantsless w/toolbelt suggestion may not align with the usual message and aim of this channel. Thank you. :^)

@daniel635biturbo

Жыл бұрын

That's probably the nicest comment I've seen in 2023, and it's true !

@reddogknives

Жыл бұрын

Yes Tony makes us all believe that he is our friend, a virtual friend, but our friend. For all you losers that think you have a friend, try borrowing a tool from "your friend". He's here for entertainment, he is a master word-smith after all, just as is Ave. Don't get me wrong, I love Tot, but I don't think he's going to be a friend of mine anytime soon, and I wouldn't miss a video for anything. Like subscribe and share for my friend Tot.

Big fan, long time viewer, your channel got me through Covid! As a Finnish IT guy who grew up around chainsaws and has never used or sharpened one, this was a really nice and detailed explanation of how a chainsaw blade works and how to sharpen them. Looking forward for more videos!

@MumrikDK

Жыл бұрын

I seem to remember him gaining quite a lot of subs during Covid while taking a loooong break from posting. I wonder if that was a general KZread thing or mostly channels with binge worthy timeless content like TOT.

@Stubby0266

Жыл бұрын

You mean plandemic

@bikerfirefarter7280

Жыл бұрын

How are you Finnish, brought up around chainsaws, but NEVER used OR sharpened a chain?

@grosmorisse

Жыл бұрын

@@bikerfirefarter7280 plenty of canadians don't play hockey

@bikerfirefarter7280

Жыл бұрын

@@grosmorisse two fish in a tank, one says to the other, 'remind me, how do we drive this'? Finnish? Maybe he's a trout! I'm working on the chainsaw connection though.

It's the middle of the night, i don't own a chainsaw, nor have I operated one for years so i have absolutely no reason to wanna know how to sharpen them better but here I am and i am absolutely not regretting it❤

@1pcfred

Жыл бұрын

When you do have to operate a chainsaw a sharp chain is a definite plus.

@darkshadowsx5949

Жыл бұрын

you shouldnt operate youtube at night while wild chainsaws are outside.

@jodygarcia9892

Жыл бұрын

​@@1pcfred i prefer a very dim witted chainsaw. Cant be smarter then me

@TravisL.Desmadreson

Жыл бұрын

@@jodygarcia9892 Lmao! You Win! (fighting game voice)

@thesfreader3068

Жыл бұрын

Yup ! (And I didn't ever operate one)

On the question of “Will you go through chains faster?” one consideration would be that you’re more likely to sharpen before your chain is dull as a river rock, improving safety and cut quality.

This old Tony is my new favourite 3D printing channel. This has increased my engagement by at least 27%

Next project: Foot pedal clutch cylinder connected to vise piston. -4AN lines and fittings are used for race car brakes. Pretty common and relatively cheap for DIY projects. Thanks for another great video!

@TheMadJagger

Жыл бұрын

And an hour of chain sharpening with GAS GAS GAS song. With inserts of Tony pressing the pedal and SPEEED effects.

Two videos in less than a month, that's great 🎉 Loved to hear the comparison between after and after sharpening, the after definitely did better

@itsamindgame9198

Жыл бұрын

I don't know. I thought after was a bit quicker.

@Hoaxer51

Жыл бұрын

@@itsamindgame9198,Well, that depends, which after were you talking about?

@itsamindgame9198

Жыл бұрын

@@Hoaxer51 Yes

@nolansprojects2840

Жыл бұрын

@@itsamindgame9198it’s hard to say, on the one hand, after seemed to be pushed more and took more force, on the other hand, after took less force but required a little more wiggling and finesse.

@bikerfirefarter7280

Жыл бұрын

I suppose it depends what or which after you are after, after all; I'll have to think about after or after after watching after and after again.

Tony I'm always excited to see you work on something. The father figure I never had. Take it easy

@bat2293

Жыл бұрын

Hey, as long as he is keeping up on the child support payments, it's all good... right?

When the hardware store where I used to work invested in a set of diamond wheels for our chain saw sharpener, it was a godsend.

That was so much fun, Tony. I always love your videos, even though I'm not really a 'chain saw guy'.

That’s life, Tony. We don’t get to choose the tales Tony’s hands tell, we just have to strap in and stare into the gaping maw of chaos and accept our fate.

I can't believe This Old Tony is here 🎉 We missed you a lot.

@nline2blast722

Жыл бұрын

...we missed you a tot

@meetv7700

Жыл бұрын

@@nline2blast722 I see what you did there.. Pretty cool.

I have been doing a lot of cutting lately so looked at several videos. I think yours might be the best explanation I’ve seen. And Tony-ism are always great.

Watching that tap break really hurt, and sent chills down my spine thinking back to CNC holes drilled shallower then the tap was going….😢

What a great explanation of Chainsaw sharpening. When I was a kid my dad just told me "have you any idea how expensive that chain is? Sure when can get a new one, then you can come visit me in the poor house in between ruining chains"

I don't think I've ever winced so much during a youtube video, first when the tap broke and then in the sequence when you were sharpening the same tooth over and over and over again. I've missed ToT videos, I get invested!

Bought my Husqvarna sharpener at a yard sale for $10, including the 8x2 it was mounted on. Never have used it for sharpening a chain, but that grinding wheel comes in handy for lots of other things so I just mounted it on a floor stand in the shop.

I'm blown away by that After-After comparison. Such an improvement! 😮

This rounded out my knowledge about filing chainsaws that will come in hand if I ever own a chainsaw, fortunately for me the decision whether to grind or file is still undecided... I will consider the smaller, compact chainsaw for office use, that was good advice.

@Kineth1

Жыл бұрын

Yes, the office-sized model is excellent for cutting through red tape, or those who apply the red tape.

@raymitchell9736

Жыл бұрын

@@Kineth1 Ah... That makes the need for the chain sharpener more obvious! 🤣

Maybe you could build an override valve on the hydraulic clamping to allow you to adjust the position of the chain. Thanks for the video!

@darkshadowsx5949

Жыл бұрын

or have it clock the next tooth in like a revolver every time you fully lift the handle.

@bikerfirefarter7280

Жыл бұрын

That occurred to me too, seemed an obvious and simple fix. A tee and a toggle piston, bosh/done.

I would watch paint dry with your commentary. Always excited to see your name pop up when you release a new video.

@paulskaar8556

Жыл бұрын

Part of me says "don't encourage him", one of the other parts says " I'll bet he could still make it enthralling".

Finally, this video was all the justification I needed: I went and bought a new surface grinder. Thanks This Old Tony!

@ThisOldTony

Жыл бұрын

lol niiice!

As someone that can razor sharpen a chain by hand, I can't believe I just watched a 29 min video on it!! LOL great vid. When he mentioned the teeth not being hardened, you would never want super hard teeth on a saw chain because they could easily snap off and strike the operator or a bystander! the speed of a tooth flying off the chain with it wide open at 9000 rpm and getting hit could be pretty bad.

Great video Tony. Im a dremel chain saw sharpening guy. The battery operated dremel can also come out in the field with me, so its a lot more versatile. I thought you might take that sharpener and try to adapt it to sharpen your mills.

@jadenhowe908

Жыл бұрын

the dremel is the way to go

@markferch5494

Жыл бұрын

It becomes painfully obvious to me when I have to touch up a full toothed 36 inch bar and then a full 30, then a full 24. Under 15 minutes easy. This is the present and the future. Dont have to take the chain off. USe diamond barrel bits. Diamond doesn't get smaller like stone and stone is too aggressive.

@bigbadwolf1966

Жыл бұрын

30 or more years ago when I got my first chain saw I thought there had to be a better way than filing. I didn't know Dremel existed but I did own a pneumatic die grinder and assorted diamond burs and one round diamond file. Sharpening blades became a pleasure, as long as I was in reach of my airline.

I used to sell Chain Saws, and this video its a really good way to teach someone new to it for sure... Thanks Tony (please, next time you're on the market for one, check out the Echo brand... it is made in Japan) ;D

That’s what I love about your channel - learning about stuff that I didn’t even know existed. And of course expertly and expertly funny explained ❤

Im not a tree pro, but i do cut/split 15-20 cords of wood a year. Ive found that my dremel with a 7/16 stone bit is a nice in between. Having the dremel out anyway is nice for when i need to take down the rakers also (about every 5th sharpen or so). I have a cheap 400 watt inverter that plugs into my trucks cigarette lighter that easily runs the dremel, for when I need to touch up the saw on the go. You still need to hold your angles correctly, and be careful not to blue the teeth with heat, but I'd take it over a hand file anyday. Much less of a pain to bring back a trashed chain and touch ups are quick and painless. 3 bits for 6.99 at tractor supply, im sure you can get them much cheaper online. 3x common sizes, same as hand files. Its definitely worth a try. Teeth come out like new.

Having used a similar machine for about ten years now. I get about two to three extra grinds out of the chains, as long as I'm setting up properly. The chains are more consistent and seems to stay sharp longer. It's also faster than hand filing as long as you keep the machine ready on the bench. In the field I use a file guide.

@1pcfred

Жыл бұрын

In the field I just try to keep the chain out of the dirt and I run what I brung.

@GAIS414

Жыл бұрын

@@1pcfred Well so do any sawyer. But if you work enough hours, eventually you will have to switch chain or sharpen it.

@1pcfred

Жыл бұрын

@@GAIS414 I'm no sawyer. Generally I only tackle one tree a day. That's enough for me. That's usually how they come down too. One here, one there. Then the chainsaw comes out to chop it up so I can haul it away. The last one was an 82 foot tall pine that decided to fall down in the front yard.

God i always enjoy your content and delivery. Just wish you could do this more often.

Thank you for the education and humor you've brought into my life with your videos. So glad to see you back 🙂

Even more petrol beaver content? We might come to think you are lumberjack. Good to see you (or your hands)

Woohooo another chainsaw sharpening video I can't wait to share it with all my friends at the chainsaw sharpening society!

@LabGecko

Жыл бұрын

_"IIIIIII'm a Lumberjack and I'm okay...."_

I'm grateful that you showed us the after and after comparison. It really put it all into perspective.

Of all the Oregon grinder presentations out there, yours is my favorite!

I’ve been laid out in bed for the past week with a bad back, and this video is the best thing that has happened so far! Good to see you, TOT!

@richardj163

Жыл бұрын

Depending how back your back is, check out: Stuart McGill, Brian Carroll…

@markm0000

Жыл бұрын

I hope you recover soon

@fieromike1

Жыл бұрын

@@markm0000 thanks I’m definitely on the mend.

@fieromike1

Жыл бұрын

@@richardj163 thanks Rich. I’ll probably start sometime the end of next week. You’re the second person to suggest that. I appreciate it!

@milledel

Жыл бұрын

Hey fellow laid-out-in-bed-for-a-week person! No bad back here, just a broken ankle. I wish you a fast recovery, this "Stay off your feet" stuff sucks.

Those Oregon saw chain sharpeners are the bees knees! We used to sharpen our chains by hand and they'd be pretty sharp, but after getting the sharpener our saw chains are razor sharp. They do take some getting used to, and in my experience you do have to lightly "kiss" the chain. Once you get used to them though, they are a game changer. We have a tree farm and about 12 chain saws of various sizes, so we're sharpening a lot of chains. Probably not necessary for someone with 1 or 2 chain saws. Also the hydraulic clamp would probably be a bummer as you mentioned, ours has the manual one and it's not a problem to use that way. Great video as usual.

Finally a youtuber that recognizes the hardships of us metric forest lumberjacks. 😂

Your videos are a pleasure to watch. Thanks for the good content.

for as long as you have been posting chainsaw videos, I imagine a once dense forest standing tall and proud, now a desolate and stumpy landscape :)

@gorak9000

Жыл бұрын

Call in Andrew Camarata - he can take care of those stumps for you with his backhoe. Actually why even bother cutting the tree in the first place, just push the whole thing over, root ball and all in one go. Much efficiency

@DuffyHomoHabilis

Жыл бұрын

It used to be called the Sahara Forest, then ToT started having fun with chain saws.

@stevehall4548

Жыл бұрын

Pretty soon the Lorax may pay a visit!!

@Fix_It_Again_Tony

Жыл бұрын

I bet he's got a lot more wooden kitchen utensils now.

As someone who's been 3D printing, feels good to hear that it has it's pros over metal working. I eventually want to build up to metal working, but that is quite an expensive hobby.

@Spiker985Studios

Жыл бұрын

The main difference is the manufacturing process difference: Additive versus Subtractive manufacturing Metal working is mostly subtractive, and 3D printing is additive Since you only add material to the surfaces that you want to build up, rather than remove material from the places you DON'T want, you have finer grained control

@bobturnbull18

Жыл бұрын

@@Spiker985Studios Actually, forging of metal provides wonderful grain structure as long as you don't messs with it by machining in the critical locations.

@Epic501

Жыл бұрын

@@bobturnbull18 He meant you have finer granularity of the control itself, not finer grain in the material lol. But he's wrong, machining is orders of magnitude more precise than 3d printing, 3d printing is just far far easier to get complex curves quickly on, and to prototype and iterate designs.

@bobturnbull18

Жыл бұрын

@@Epic501 That was certainly an odd way of expressing the point. I am familiar with both machining and three d printing having both machine tools and a three d printer in my shop . I'll have to revise my opinion of the "granularity" of each.

As usual, killer indepth analysis that comes to a point. Thanks keff

Thank you Tony for this chain sharpening video! I've waited it for years!

I have probably sharpened hundreds of Chains over the last years. I have never seen those markings on the Teeth. I really like the "Stihl" combo files. They indicate the angle and take of the little depth thing just the right amount.

@TheStuartstardust

Жыл бұрын

Yes! That and the Stihl pocket chainsaw vice you can mount on a wood stump. Only thing I use on the go. It's fast, lightweight and simple, it just works. 👌💪

@MarkBeetham

Жыл бұрын

Yes! I used to hate sharpening. I would rather spend an extra 20 mins rubbing through branches with a blunt chain than get the hand file out. Now i have one of those stihl combo things i have found myself sharpening most times i get the saw out. i wouldnt exactly say that i enjoy sharpening but i enjoy using a sharp saw.

@Fix_It_Again_Tony

Жыл бұрын

Pferd makes those for Stihl. They are great!

@jonathanrichards593

Жыл бұрын

@@MarkBeetham Just for a moment I thought you wrote "...found myself sharpening /more/ times than I get the saw out." Glad to know that you haven't got the filing bug that badly.

Love this! I run a 72" chainsaw mill. I bought a similar model and loved hearing your thoughts on it. Ill have to try some finer wheels to help with chain life.

*By far the clearest Vid I've watched on Chain Sharpening. The 1st 15-20 minutes are an absolute Must See*

Not only did I watch this the first time, I watched it again. I cannot emphasize how much I love your videos.

Hey, Tony! Great vid, as usual! 2 tips from a long-time hand filer and 620 grinder user.... 1. Change the chain pawl to the tall one included. Works much better than the shallow one. No need to spring load... 2. Ditch the included pink wheels and replace them with CBN wheels. You will be thankful you did! All the best from South Africa Mike

@ChesterGingrich

Жыл бұрын

Was going to make the CBN wheel suggestion myself! Dressing and messing with those pink wheels lasted me through 2 1/2 pink wheels before I went the CBN route. Consistent and less "mess"!

Loved the metric tree joke 🙂 I've always understood the line on each tooth to be the maximum amount of metal you can file back before the chain is worn out. I'd not considered the angle check, nice idea. I tend to file when working in the field, then run the grinder on the chain before putting the tool away, so the teeth are uniform and sharp ready for next time. I agree that the grinder does take off more, I've found that you need to set the tooth position separately when switching between the lefts and the rights. I advance the tooth towards the wheel until its just cutting enough. The other handy one is to flip the chain bar regularly so that it wears uniformly on both sides and you get better life from it.

Thank you Tony. I do miss your videos, your dulcet tones, and your paws. I enjoy the fact that you create videos on loads of topics, and that all are excellent.

I have the Oregon 310 and had the same problem with my M12 Hatchet chains but hadn't figured out a solution yet so I'm glad you posted this!

Love your stuff. The fastest way to sharpen a chain is with a Dremel, or similar, tool with a new cylindrical diamond bit of the correct diameter. With a little practice it's more controllable and accurate than a file, and faster, and many times faster than any other sharpening device.

@LabGecko

Жыл бұрын

_watches a Dremel head yeet off the wall and outside the garage_

@ChimeraActual

Жыл бұрын

@@LabGecko well, you need to be competent.

I grew up in my dad's lawnmower shop. One of the jobs they would give me was sharpening chainsaw chains on a sharpening machine like this, but made in the 70's. It had the catch to push on the back of the cutting tooth. This catch was spring loaded, holding it down, had no side to side play, and the very tip turned up slightly. This upturn would push the tooth down against the guide rails at the cutting side, while the spring tension would hold down the non-cutting end. The guide rails were adjustable, but not a vice like feature. To set the guide rail opening width, you would insert the chain and then tighten down a thumb screw at either end of the guide and pinch down on the bottom of the chain teeth. You'd then back each thumb screw off 1/8 to 1/4 of a turn, giving just enough clearance to allow the chain to slide but not roll. You'd eyeball match the rotational angle. This got you close enough. Then, you'd pitch the head over to a default setting, which was not the right setting, but close enough to get started. The catch had an adjustment screw to move it along the guide rails. You'd bring the cutter head down, placing the cutting wheel against the lowest part of the original cutting edge. The catch would be adjusted to this point. The head would then be moved up and down, adjusting the pitch over of the head until the wheel contacted the original cutting face for about half of the edge. Now the cutting would start. The catch arm would be adjusted half a turn of the screw, and the whole chain would be run through on these settings. This would clean up about 3/4 of the vertical cutting face. The catch would be advanced another half turn, and the chain ran through again. This would repeat until it was close to grinding the cutting corner. At the back of the grinder was a flip down arm with an adjustment screw. This would limit the vertical limit of the grinding wheel. The wheel would be set against a tooth, at the corner, and the vertical limit adjusting screw would be gently snugged, then backed off half a turn. The vertical limit arm would then be put in a third position, where the adjustment screw on it was lined up with a spring loaded pin that had a big knob on it. Push the knob in, and the vertical travel is limited to what was set at the point. The last pass of sharpening, the full front cutting edge and corner were sharpened, you'd push in the knob, bring the head down to this stop, and then advance the chain to the next tooth. While advancing, the grinder would adjust the height of the depth gauge. Everything would be flipped to cut the other set of teeth. This sounds like a lot of work, but with setup and grind time, a single chain only took about 5 minutes. We also offered non-stock grind profiles that the professionals loved We would also do less aggressive profiles for customer machines which didn't have the power for their chain. We could even face the top face of the tooth for a more abrupt corner.. I think my favorite modification was a 3 face faceted corner which gave 3 points for cutting the fiber rather than just one or a wedge.

Happy Father’s Day, Tony! Thanks for your many fun, informative videos!

I light up every time a see a this old tony video, it makes my day. Post more often bud!!! Love the content!

A This old Tony video. My day can't be better. ❤ Wait, is it a chainsaw video?

Have the same one and use the heck out (side hustle) sharpened 80 plus changes last month. You might consider a CBN grinding wheel. That was a real game changer for me ... grinds lots cooler and profile seems to last forever (well almost forever LOL).

I had never saw a comparaison video of after and after anywhere. This is first class genius !!

Been watching for years, you're the best. This one had me literally laughing out loud.

The hand filer from Stihl is pretty damn good. Never been real good with a file but I get REALLY good results with it.

@SvWarfield

Жыл бұрын

I could never get the rakers to match up with the teeth height before, and I will ONLY use this tool now!

@JacobScherer

Жыл бұрын

Yeah buddy! Seems like a lot of people ignore the rakes no matter how they sharpen. I cut a lot of softer wood and even some blades right out of the package have an overly conservative rake height for how much bite I want to take. With a 2 in 1 file, they are always right!

I'm no arborist, so how can I tell if my trees are metric?

@spudpud-T67

Жыл бұрын

They look at you funny if you fractionalise them.

@spudpud-T67

Жыл бұрын

As crazy as saying 65 hundreds of a millimeter.

Tough day on this side of the pond. You are my prozac. Thank you.

I've got a few dull chainsaw saw chains, so I'm gonna watch as many of those videos as necessary until the chains somehow become sharp again without me actually touching them.

@wades623

Жыл бұрын

Just set the phone next to them while the videos play

@jonathanrichards593

Жыл бұрын

@@wades623 But be careful that the phone is at a 30° angle...

Awesome - a half hour **squee!** of new video from the single most personally consequential/my favorite individual on KZread!* *I own and use a metal lathe and a TIG welder, both (but especially the latter) because of time spent enjoying _This Old Tony's_ pleasantly excecuted audio (keeping loud, grating, or sudden & jarring metal-cutting noise to a minimum), wonderfully dad-joke-ish sense of humor, and the standout, absolutely _excellent,_ downright artistic production & camera work, that's always left me wondering if Tony was a film student in a past life. These attributes (primarily the production quality and camerawork) have long set Tony apart from almost all other welding and/or machining on the internet - and even inspired the flattery of a few imitators paying clear, if overenthusiastic, homage to their inspiration. We love our This Old Tony!

I liked the "after vs after" side by side clip to really give us a visual representation of just how much better it was after!

It's always a good day when I can watch a This Old Tony video before I go to sleep... Thank you Tony, Good Night. 😁😴

Thought this one was going to be a long grind But it turned out pretty sharp! Ps: No video of yours has ever bin a grind Love you ToTony

Awesome. I do make ripping chains and they need to be consistent. I usually hand file chains for crosscut a few times then stick them on a grinder to get everything back to matching. But when ripping I use the grinder every time. I also use the grinder to take down the rakers(depth guides). When crosscutting as long as a chain is halfway sharp it doesn't have to cut straight for more than 10-20 inches usually at most. But when ripping through 8 or 10 feet the chain has to cut perfectly straight all the way. I don't think perfect angles matter as much as consistency as you mentioned. Thanks Tony

You can turn a dull subject into comedy. Hats off, sir.

Even though I haven't touched a chainsaw in twenty years, I really enjoyed this video. And the after/after comparison convinced me that I need an EDC chainsaw.

YAAAAY!! 29mins 52second of ToT is JUST what I needed today! Thanks!!! EDIT: 18:18 isn't that another mark to show what the angle should look like? Your settings match it closer then the "by the book". Edit 2: Can't believe you didn't show us a dull saw chain cutting. (-_-) lol jkjk

Nothing better than coffee and a new TOT video Great way to start the day,

Oh, how I've missed TOT! I was just running out of knowledge juice only to find this convenient resupply! Thanks, Tony....

I’ve have a Oregon chain grinder and love it. Over the years I’ve settled on a favorite chain and the grinder now is set and I don’t have to change the angles very often. I have ended up the neighborhood chain sharpener so now all their chains are at my favorite angles.

I love "Old Tony's" channel -- always a great pleasure with each video. Greetings from Münster in Germany.

Best channel ever. I always learn a lot watching your videos! ❤

Thanks for another video!! I am always waiting with baited breath for the next TOT vid.

This is perfect timing Tony. Just setting up a chainsaw mill this week. This information will come in handy. Unless I get a little to handsy with the chain and lose a hand.

Loved the comparison. After versus after is very helpful.

The after and after image really sold me on this, now i really want one

I appreciate the after and after comparison. Really drives home the point

i can't believe i can't get enough of This Old Tanya

I don't have a chainsaw or have ever used one, for some reason this was mesmerising to watch.

That line on the top of the tooth at the correct cutting angle is also the maximum life of the tooth marker. Can't file or grind any further than that because the root of the tooth is too weak and it'll just snap off in the cut, which makes for a fun time trying to pick it out of the cut before you go at it again with a new chain.

Oh wow, that initial reverse grind looked clean, I’ll have to try that one.

27’22” gave me the giggles which turned into a belly laugh and hiccups. Hysterical! Thanks ToT.

It's amazing, I've never owned a chain saw, never used a chainsaw, and have no reason to either, yet I sat and watched the entire video engrossed the whole time. I now know exactly how to sharpen a saw chain.

I was told by a Oregon guy years ago that the burrs left by filling actually help ! I used to file from the outside in ( side with the edge I'm trying to sharpen) so there wouldn't be a burr ! Once I filed from the inside out and didn't worry about the burr it did cut better For What it's worth. Thanks 👍 enjoyed your video