Watch the timecode-show: • Dillon Francis - Need ... Instagram: @marcokampf_lighting
Жүктеу.....
Пікірлер: 49
@bentoylight19503 жыл бұрын
Hi. I already knew all this stuff, but your explanations are so clear that i just want to support you. Thanks.
@MarcoKampfLighting
3 жыл бұрын
thanks mate! =)
@samjimenez8713 Жыл бұрын
Love the macro! Delay times always interrupt the flow of my programming. Glad there’s a way to expedite the process a bit
@LD_ROBE4 ай бұрын
Nice macros! Do you actually know that 0 thru .3 thru 0 will also work for delay and make two wings? Same result as you do with first two wings without selecting it separately. Just select whole rig and then 0t.3t0 will work as "side to center" or .3t0t.3 in opposite direction :)
@someisaneperson3 жыл бұрын
Really appreciate the videos. Thanks!
@michaelkrugex67113 жыл бұрын
Good tutorial, keep it comming! 🙌🏻
@aaronhiebdiscgolf9571 Жыл бұрын
Thank you for reminding me to enable tracking. I forget this ALOT making these types of cues
@dukemoita3 жыл бұрын
This is the way..Thanks!
@johannesbiegl3 жыл бұрын
Well explained bro !
@joepvanberkel3333 жыл бұрын
Please keep on making video’s like these, i’d like to see a video about how you set up your workflow and what you put on your executors/faders.!
@penatacahaya7134
10 ай бұрын
fkk
@Bingbanglightingdesinger3 жыл бұрын
Super brother ❤❤❤
@aslaniomextiev4912 жыл бұрын
Thank bro !
@louischoisy5111 Жыл бұрын
thank you so muchhhhhhh
@tzachis Жыл бұрын
this awesome thanks
@charlyzultan53023 ай бұрын
wow thanks marko
@burakdemirel39029 ай бұрын
Ohh thank you so muchh broo yore best
@J-Gx3 жыл бұрын
THANKS!
@ibarylsky2 жыл бұрын
Amazing that only 2 cues are enough to create something nice!
@manuelrodriguez-oe7cv3 жыл бұрын
nice
@rimolighting9516 күн бұрын
Nice
@pradeepgupta41652 жыл бұрын
Good
@lightdesignerharrysingh36762 жыл бұрын
Very nice information 🙂 thanks bro I have a small question, which 3d do you do that?
@MarcoKampfLighting
2 жыл бұрын
It's Capture =)
@anandhuam7256 Жыл бұрын
We were trying to do the same , but it's not working
@Music43810 ай бұрын
I want to ask you that’s right when I write this SetVar $delaytime= («set DelayTime »)
@kanidie444Ай бұрын
Grande rei pelas macros
@dennisfeichtner80022 жыл бұрын
saugut!
@MarcoKampfLighting
2 жыл бұрын
Danke dir! 🙌
@Valenz68Boy29 күн бұрын
Hey nice tutorial but I have a small issue : when I play my firt sequence (left top wing) in my visualizer (ma3d) it's playing the dimmer first and once all lamps are on it moves them. I don't understand why in your video the dimmer and position presets are played at the same time and by me it's first dimmer then position....
@DmxHubManojKumarАй бұрын
Hi sir thanx for making this video Please make video how to record macro
@felixaudinos39542 жыл бұрын
tanks for the fadetime you make mew macro ?
@lobito23455 ай бұрын
what kind of lights are those?
@FilippoTeani Жыл бұрын
Do you share your macros?
@AerialDP2 жыл бұрын
Great Macros , I have them working with 0 thru 3 but not 3 thru 6 , so a delay that starts above zero does not work, it just starts at zero . Why might this be ?
@MarcoKampfLighting
2 жыл бұрын
Hei Niall, double check your quotation marks...
@MarcoKampfLighting
2 жыл бұрын
+ Double check the values in a fixture sheet...it might be correct but just being displayed wrong in the encoderbar
@AerialDP
2 жыл бұрын
Yes , when is a problem not a problem! When it does what you want but the display in the encoder bar displays 0>5 instead of 2>5 Happy days 🙂 Thx for replies. I did correct the quotation marks ✅
@daianadetzel
2 жыл бұрын
@@MarcoKampfLighting hello, I have the same problem, what is the solution? I don't understand the quotes
@pixlvfx29642 жыл бұрын
Could You show how to make the delay macros in MA3?
@MarcoKampfLighting
2 жыл бұрын
I'll put it on my list! =)
@giodoeze81863 жыл бұрын
Why it dont work they all go on the same moment. In the delay window i cant see the 0 thru .3
@MarcoKampfLighting
3 жыл бұрын
Just a guess: Make sure to use this: " for setting up the uservariable instead of ' twice.
Пікірлер: 49
Hi. I already knew all this stuff, but your explanations are so clear that i just want to support you. Thanks.
@MarcoKampfLighting
3 жыл бұрын
thanks mate! =)
Love the macro! Delay times always interrupt the flow of my programming. Glad there’s a way to expedite the process a bit
Nice macros! Do you actually know that 0 thru .3 thru 0 will also work for delay and make two wings? Same result as you do with first two wings without selecting it separately. Just select whole rig and then 0t.3t0 will work as "side to center" or .3t0t.3 in opposite direction :)
Really appreciate the videos. Thanks!
Good tutorial, keep it comming! 🙌🏻
Thank you for reminding me to enable tracking. I forget this ALOT making these types of cues
This is the way..Thanks!
Well explained bro !
Please keep on making video’s like these, i’d like to see a video about how you set up your workflow and what you put on your executors/faders.!
@penatacahaya7134
10 ай бұрын
fkk
Super brother ❤❤❤
Thank bro !
thank you so muchhhhhhh
this awesome thanks
wow thanks marko
Ohh thank you so muchh broo yore best
THANKS!
Amazing that only 2 cues are enough to create something nice!
nice
Nice
Good
Very nice information 🙂 thanks bro I have a small question, which 3d do you do that?
@MarcoKampfLighting
2 жыл бұрын
It's Capture =)
We were trying to do the same , but it's not working
I want to ask you that’s right when I write this SetVar $delaytime= («set DelayTime »)
Grande rei pelas macros
saugut!
@MarcoKampfLighting
2 жыл бұрын
Danke dir! 🙌
Hey nice tutorial but I have a small issue : when I play my firt sequence (left top wing) in my visualizer (ma3d) it's playing the dimmer first and once all lamps are on it moves them. I don't understand why in your video the dimmer and position presets are played at the same time and by me it's first dimmer then position....
Hi sir thanx for making this video Please make video how to record macro
tanks for the fadetime you make mew macro ?
what kind of lights are those?
Do you share your macros?
Great Macros , I have them working with 0 thru 3 but not 3 thru 6 , so a delay that starts above zero does not work, it just starts at zero . Why might this be ?
@MarcoKampfLighting
2 жыл бұрын
Hei Niall, double check your quotation marks...
@MarcoKampfLighting
2 жыл бұрын
+ Double check the values in a fixture sheet...it might be correct but just being displayed wrong in the encoderbar
@AerialDP
2 жыл бұрын
Yes , when is a problem not a problem! When it does what you want but the display in the encoder bar displays 0>5 instead of 2>5 Happy days 🙂 Thx for replies. I did correct the quotation marks ✅
@daianadetzel
2 жыл бұрын
@@MarcoKampfLighting hello, I have the same problem, what is the solution? I don't understand the quotes
Could You show how to make the delay macros in MA3?
@MarcoKampfLighting
2 жыл бұрын
I'll put it on my list! =)
Why it dont work they all go on the same moment. In the delay window i cant see the 0 thru .3
@MarcoKampfLighting
3 жыл бұрын
Just a guess: Make sure to use this: " for setting up the uservariable instead of ' twice.
@MarcoKampfLighting
3 жыл бұрын
Let me know if it works out for you ;)
Can you share macro
Where are the macros?
@MarcoKampfLighting
2 жыл бұрын
You can easily built them your own ;)
Nice
@MarcoKampfLighting
2 жыл бұрын
Thanks Buddy!