I hope I did'nt miss the walk through of your bay boat ? Thanks for the walk through of the Grady White ( Dream Boat ). Wow, what a boat. Great history and sea worthiness and hundreds of accolades !

@forgottencoastfishing

6 ай бұрын

Thanks! Yes I love this boat! My dad had a sailfish and then a marlin so a lot of my younger days of fishing were on Grady’s. So when i found this one I jumped on it! No I haven’t done a walkthrough of the bay boat. I had another subscriber ask about that as well, so look for that at some point! Thanks for watching!

The Grady-White boats are amazing fishing boats. I used to have the 22' but moved up to a 30' CC to fish further offshore. Thanks for great tour.

@forgottencoastfishing

6 ай бұрын

Thanks. I bet that 30’ boat is nice to take offshore! Thanks for watching!

@chasingmyasianqueen

6 ай бұрын

@@forgottencoastfishing yes we feel safer but the twin 300's burn the fuel.

@forgottencoastfishing

6 ай бұрын

I’ll bet!

Great walk through, please do your bay boat, very interested in seeing it

@forgottencoastfishing

6 ай бұрын

Will do! I’ve had several guys request that! Got to clean it up a bit but look for it! Thanks for watching!

Thank you for a great video. I have been waiting for this awesome Boat man. Congratulations…💪 It actually looks bigger than it really is

@forgottencoastfishing

6 ай бұрын

Thanks glad you enjoyed it! And thanks for watching! It is surprising how much bigger it feels being listed as a 23’5” boat. That 9’3” beam makes a huge difference.

Nice review, thank you. One aspect worthy of note--the width. A friend ended up with the 25 foot model--not because he needed two more feet, because the 25 was not as wide; on the road, the 23 is TOO WIDE in some states. Recommend anyone who wants to buy this great boat determine if you will be LEGAL towing the darn thing. My friend found out he could not tow it--New Jersey I think it was, so ended up with a longer, but narrower boat.

@forgottencoastfishing

4 ай бұрын

Exactly right. Here in Florida we need to apply for a special yearly permit. But fortunately I only have to tow a couple miles to the boat ramp. But still a pain to get a permit each year. Thanks for watching!

@jimquantic

4 ай бұрын

@@forgottencoastfishing Your point, is the key point. I am seven miles from my ramp--and though "technically" I am over, as long as I am careful (and I am), it is probably a mute point. Of course, I would NEVER--nor would you--try to squeeze her into too small a space between cars. I would literally stop and put on emergency blinkers before I did that. By the way, a great aftermarket thing I have (can't recall the maker) is a plug in light bar for the cavitation plate AND the guide rails, so I have super bright LED's way up high AND on the plate. I always say if anyone hits me, THEY have a lot of explaining to do--they sure beat a red flag.

@forgottencoastfishing

4 ай бұрын

@@jimquantic Good idea about the aftermarket light and all great points! Good advice for all viewers with oversized boats. Thanks for watching!

Just got into boating currently have a Trophy 1703cc. I plan on going bigger reference having more space for the family and doing over night trips. After watching your review really considering this specific make and model boat. Looking forward to future reviews and videos.

@forgottencoastfishing

Ай бұрын

It’s a good boat for the family as well as fishing. I got this boat for the same reasons you mentioned. I considered a Parker but it only has the V berth and could only really sleep two. Having the 3rd bunk in the Grady is nice. If you haven’t already check out the video where we spend the night on the Grady. It shows a bit more of the boat and how we use it to spend the night on it. Thanks for watching !

Nice boat!! Thanks for sharing!!!

@forgottencoastfishing

6 ай бұрын

Thanks!

I like your Grady White. One necessity for me is a trolling motor. I'm approaching seventy years old, and not able to fool with anchoring. IMO...Yamaha F-150 is the best engine ever made. Just think, you have a Ford F150, and two Yamaha F-150s. Win, win. I'll be staying in Apalach come June for the RS opening.

@forgottencoastfishing

6 ай бұрын

Yeah I think about that trolling motor often! Although I’ve gotten decent at getting pretty close to the reef but surely couldn’t do it without that windlass! Thanks for watching!

Great video Keep it up!

@forgottencoastfishing

6 ай бұрын

Thanks! And thanks for watching!

great video !!! How about a walk through on your other boat ..... Thanks !!!

@forgottencoastfishing

6 ай бұрын

Thought about that. It’s actually got sort of a good story behind it. Maybe I’ll put something together. Thanks for watching!

nice boat

@forgottencoastfishing

6 ай бұрын

Thanks! And thanks for watching!

You happen to know if your model year has a wooden transom? Awesome review btw

@forgottencoastfishing

3 ай бұрын

Thanks! Im not sure, I know the deck is 3/4 inch marine plywood encapsulated with resin. So it could be, but the transom is as solid as the day we got it. The only issue I ever have had, is it sat for about 5 years when my son was born prematurely and I had some wood rot around the front floor hatch. It looks like water got in where the wood was cut for that hatch. I had to have a section cut out and replaced. That’s when I replaced all the hatches, took the carpet up and painted. But when I replaced the hatches I coated the edges of the plywood with resin so hopefully won’t have that issue again! Thanks for watching!

Thats great info. I am looking for a boat just like that. I want it for scuba diving as well. And crossing to the Bahamas. Thanks.

@forgottencoastfishing

3 ай бұрын

Should work great for that. I love it since it’s big enough for offshore but small enough to handle by myself and not too expensive on gas consumption. Thanks for watching!

Great video, thanks for showing her off. I have owned a 1993 Gulfstream for 2 years and enjoy it off shore in Treasue Coast Florida. Looking to possibly repower at this time. You have twin 150's. Do you have all the power you need ? And what are you're estimated gallons per hour for a day of, " run out to fish, troll around a few hours, hopefully catch, catch, catch, and run back to the ramp" ? Maybe six or seven hours ? Thanks for your help!!! Boat,Boat,Boat

@forgottencoastfishing

6 ай бұрын

Thanks! Glad you liked the video. Yes those 150’s power the boat just fine, I’ve never had it wide open so it goes as fast as I need it. I’ll check on some more details on fuel consumption the next time I’m out and get back to you, but when running out to a spot if it’s calm I can go about 35 mph and get about 1.8 mpg and if it’s rough I can go about 25 mph and get about 1.4 mpg. I’ll check on what it looks like at trolling speed. But I usually burn 40-60 gallons per trip which is typically 20-30 miles offshore mainly anchoring on reefs going to 3-5 reefs and turning the engines off when anchoring. About a 7 hour trip. But I’ll get a little more details next time I’m out and let you know! Are you considering the Helm Master system? I would love to get that if budget allows when I have to repower. If it’s as good as advertised it seems very helpful to stay on a reef without having to deal with the anchor. Thanks for watching!

Where did you get the console cover for flush mount fishfinders? The 2006 232 came with that electronics compartment.

@forgottencoastfishing

Ай бұрын

It was all set up like that when I bought it so I am not sure. So somebody along the way configured it like that. Thanks for watching!

Curious if you have a thru hull transducer. I am getting ready to install one on 232 and am curious on where’s yours may be positioned and how it performs ? Thanks -Jared

@forgottencoastfishing

3 ай бұрын

No it’s the typical mount. It’s mounted just to the right of the drain hole. There is a good bit of interference when I’m running. I don’t get a very clear picture when I’m running. I would think the through hull would solve that. So that’s probably the way to go! Thanks for watching!

Ever thought about putting a trolling motor on her? If that's even possible with the bow rail.

@forgottencoastfishing

6 ай бұрын

Definitely thought about it. I talked with my mechanic and it can be done, although he said it’s tougher on Grady’s due to running the wiring etc. The other thought I had was when I repower is to get the Yamaha Helm Master system. But my mechanic says my engines have a lot of life in them so right now, at least, I’m using the anchor which is not too bad with the windlass. Thanks for watching!

WHAT ABOUT THE PERFORMANCE ON THE ROUGH SEAS, AND THE STABILITY WHEN ANCHORING

@forgottencoastfishing

6 ай бұрын

I’ve been out in some pretty rough seas and I’ve never felt unsafe. Even in 2-4 seas with the trim tabs I can still go 25 or so mph. I don’t like to bang the boat so I tend to take it easy, but definitely for a mid 20 foot boat it feels and handles the chop very well. At anchor in rough seas it does roll a bit, but I think most boats would do the same. Due to the hull shape it feels quite stable. It really is a good mix of size and weight to handle rough seas but small enough to trailer, and not spend a fortune on fuel.

I have a 2008 very similar. What grill do you use for family time?

@forgottencoastfishing

2 ай бұрын

It’s by Magma. It’s stainless steel. Been very pleased with it. And when we bought it we also got the tray that hooks on the front which gives you a place to set plates, utensils etc. We store it in a plastic tote bin which we also use as the table when we eat. It’s that reddish bin you see in the video. Hope that helps!

@ericpuente

2 ай бұрын

@@forgottencoastfishing Thank you!

Can you share the brand and if possible the model of the mirror mounted to the windshield?

@forgottencoastfishing

2 ай бұрын

It’s made by CIPA. I don’t see a model number on it, it was on the boat when I got it. But just google cipa rearview mirror and you’ll see them. Thanks for watching!

@Grady252

2 ай бұрын

@@forgottencoastfishing Thanks! I was able to find it but curious as to how yours is mounted. Looks like it might be screwed in through the aluminum channel? The bracket on this mirror normally would go over the top edge and screw in, but the canvas is in the way which is my issue. If yours is screwed in through the aluminum channel, then perhaps I can do the same on mine.

@forgottencoastfishing

2 ай бұрын

Yes it’s screwed in. There is a bolt that goes through a rounded bar that runs lengthwise vertically right where the two window panels meet. It looks like the rounded bar is part of the port side window panel. There is a hole drilled through that rounded bar. And the head of the bolt is outside towards the front of the boat and the nut is on the inside of the mirror bracket. Hope that helps. Friend me on Facebook and I can send a pic if you want. facebook.com/profile.php?id=100090280696991&mibextid=LQQJ4d

Is it still available

@forgottencoastfishing

28 күн бұрын

This was just a walkthrough to show everyone a little more about my boat, it’s not for sale.

What year is your grady?

@forgottencoastfishing

6 ай бұрын

2006. Same with the engines. The previous owner gave me a notebook with all the service records etc. I got lucky, it was well taken care of. My mechanic says the engines have a lot of life left in them. They had about 700 hours on them when I got it. Thanks for watching!

Need to stretch her legs and hit the Middlegrounds. I would for sure. Plenty capable for it. But invest in that 2 speed reel first or you may be too tired to drive back

@forgottencoastfishing

6 ай бұрын

I am itching to go further! But I did get a Shimano speedmaster 16 for Christmas. So finally good there! Thanks for watching!