Thanks you, sir. I will try this. I don't have a manual so if this doesn't work I will order one. The machine just won't open full throttle right now. Again, thank you.
@user-yy6oo7sj2l2 ай бұрын
Anybody asking how to access, hold the 2 bottom left buttons and the bottom right button on the monitor all at once for 5 seconds. Then enter... 0E 32 3A... then go to his 70 code he showed and go from there... Thanks for the video. Very helpful.
@user-yy6oo7sj2l
2 ай бұрын
Just had my governor feedback wire from the motor go bad. And after going through the troubleshooting process discovered I needed a new governor assembly. I will use this process after I've installed the new one. Thank you for the informative video.
@easternequipment59976 жыл бұрын
I put a new throttle actuator on a 312B. I was told it needs programed to the machine. Is this how to do it? Or are they something else that needs done?
@hydraulics
6 жыл бұрын
this should work. if you need mechanical adjustments, the manual will be needed too but you can try calibrating first
@mdfaisalkabir7581
9 ай бұрын
@@hydraulicshow to select p mode
@albertohernandezlopez15352 жыл бұрын
Buena esplicasion
@abdomkhatri94713 жыл бұрын
MERCI bezaf
@crunchybacon254 жыл бұрын
During calibration should my machine be idling up?
@hydraulics
4 жыл бұрын
Yep
@crunchybacon25
4 жыл бұрын
hystat I replaced just my throttle cables and believe when I reinstall my motor something is off a little
@jrabot20352 жыл бұрын
Hello sir i have a problem 312B im trying to calibrate the machine but nothing happen monitoring error not to calibrate We bought new ecm the rpm only 1200 i want to 1800 rpm but fail to high what would be cause of this system sir im Lionel from Philippines your subscriber thank you for the tips
@mdfaisalkabir75819 ай бұрын
Hi bro this option used but only 3 to 4 running step . Not veriable . What is the problem
@hendrik1636c4 жыл бұрын
Why not show us everything from the beginning? No one knows how to get to that 70 P mode
@hydraulics
4 жыл бұрын
I did here: kzread.info/dash/bejne/q4h_q6-MeMLReZs.html
@meilihuang-tb4st2 ай бұрын
Dear friend I would love to join your network to see if there's a way to collaborate. Looking forward to connecting with you. Sincerely!
Пікірлер: 18
Thanks you, sir. I will try this. I don't have a manual so if this doesn't work I will order one. The machine just won't open full throttle right now. Again, thank you.
Anybody asking how to access, hold the 2 bottom left buttons and the bottom right button on the monitor all at once for 5 seconds. Then enter... 0E 32 3A... then go to his 70 code he showed and go from there... Thanks for the video. Very helpful.
@user-yy6oo7sj2l
2 ай бұрын
Just had my governor feedback wire from the motor go bad. And after going through the troubleshooting process discovered I needed a new governor assembly. I will use this process after I've installed the new one. Thank you for the informative video.
I put a new throttle actuator on a 312B. I was told it needs programed to the machine. Is this how to do it? Or are they something else that needs done?
@hydraulics
6 жыл бұрын
this should work. if you need mechanical adjustments, the manual will be needed too but you can try calibrating first
@mdfaisalkabir7581
9 ай бұрын
@@hydraulicshow to select p mode
Buena esplicasion
MERCI bezaf
During calibration should my machine be idling up?
@hydraulics
4 жыл бұрын
Yep
@crunchybacon25
4 жыл бұрын
hystat I replaced just my throttle cables and believe when I reinstall my motor something is off a little
Hello sir i have a problem 312B im trying to calibrate the machine but nothing happen monitoring error not to calibrate We bought new ecm the rpm only 1200 i want to 1800 rpm but fail to high what would be cause of this system sir im Lionel from Philippines your subscriber thank you for the tips
Hi bro this option used but only 3 to 4 running step . Not veriable . What is the problem
Why not show us everything from the beginning? No one knows how to get to that 70 P mode
@hydraulics
4 жыл бұрын
I did here: kzread.info/dash/bejne/q4h_q6-MeMLReZs.html
Dear friend I would love to join your network to see if there's a way to collaborate. Looking forward to connecting with you. Sincerely!
i have machine cat 322 bln