Plans are now available: bit.ly/3DlnU2h 👍

PVC trim don't rot and does not need to be repainted every 2 years, worth every penny! Good on you!

I love your problem solving the best. Overcoming challenges of trying to do it alone. This gives me *more* respect for the Essential Craftsman for doing what he does at his age. Mind boggling.

@ShopNation

Жыл бұрын

Oh I know that guy is legendary

@hansangb

Жыл бұрын

@@ShopNation Take some credit as well. Your content is TOP notch. Funny, informative, and genuine. All the ingredients needed to reach 1M subs and beyond.

Here’s a caulking tip. Before applying caulk, put painters tape on both sides. Caulk the joint and peel the tape. Nice clean lines

Love when difficult one man work can really pull our someone's engineering ingenuity

I like the Witt Works inspired title to this video. 😂 awesome job on the shed build

@wittworks

Жыл бұрын

thank you?

@corythomas909

Жыл бұрын

@@wittworks best compliment I can give haha

Wow! The more of these build videos I watch the more grateful I am for the builder of my 10x14 shed.

I spent a winter setting up Christmas decorations and we had a hook ladder like that for tall peaks, only it was made of metal and was extendable. As far as I am aware, something like that is the only way to climb high angle metal roofs safely. I remember the boss complaining about how expensive it was, I think you saved a lot making your own.

It's looking good.

Your struggle with Hardiplank is an easy solve. Clamp a 2x4 to the length of your skinny cut plank until you get it in place.😊

My brother has only been a carpenter for 7 years and he always says do best and caulk the rest hahaha. This shed is amazing bud.

Caulking tip: buying a battery-powered/cordless caulk gun not only saves you from hand cramps, but it also gives more consistent results. Most major tools brands offer them (Milwaukee, Dewalt, Makita, etc) but they can be expensive if you buy from one of the big brands. If caulking isn't your full-time job, the Ryobi One+ 18V model is cheap and seems to work well. It has a dial to set the rate at which caulk is delivered, then you pull the trigger and it delivers caulk at a nice even rate. All you have to do at that point is concentrate on moving the gun at a consistent pace. I thought the idea of a cordless caulk gun was ridiculous when my carpenter friend showed me his, but now that I've used one I can't argue with the results!

@thomasfouts2700

Жыл бұрын

Absolutely agree with you! I have to be one of the worst caulkers in the midwest, but now with my battery powered Ryobi caulk gun, I look almost like I know what I'm doing!

Your shed has more windows than my house

An old carpenter once told me “a little caulk, a lick of paint will make a carpenter what he ain’t” good job!

@jerryjenkins6071

Жыл бұрын

This reminds me of the old welding saying, “grinding and paint, makes me the welder I ain’t”

Oh sweet. I'm not the only one with a haunted building. 👻

Moderate tip, do the verticals first so you can get an exact width for the top boards with an even reveal to the window. 1/4" is typical. Pro tip, measure for your reveals, cut the boards, pocket hole jig together, then attach around the window. Keeps things flat, square, and even. No more crooked boards that moved due to attachment forces.

@rodbarron

Жыл бұрын

cool no one asked for your "tips"

Another great video.

It's a really nice shed. Proud of you

Man you should be a play by play man. I love description.

Look's pretty dang good! Rock on there, Mr. Greatness.

You know, painting that facia before the roof goes on is precisely what our builder had our painters do on our just completed new home. So, totally nailed it with an accidental “pro tip!”

Can't wait til part 8. I was on the verge of buying a 2 story shed from home depot but after watching these I'd love to give it a shot

Window trim will have gaps due to expansion and contraction. Best thing to do with those is construct them as one piece, joined together with pocket screws and pvc glue ... that way they can't separate with expansion and contraction.

One thing to consider if you are doing a good amount of caulking is the Ryobi Battery Powered Caulk Gun. I use mine all the time, and simply does a great job. Why keep pulling the trigger, when you can empty a whole tube with one easy trigger pull. That and the speed adjustment works awesome to set your pace.

Really enjoying this series. Amazing what you’ve done. Of course you are considerably more skilled than you give yourself credit. But laughing at your own learning is part of the fun of the videos. Congrats so far. Awesome looking structure.

Thanks for making me feel good. I too am half way into putting up a small shed and have have made some of the same mistakes. For the second half I can avoid some of your mistakes, and make some new ones. :) .

Sometimes I forget why I originally subbed years ago, of course there is the shop nation greatness, humor and of course the detailed excel tracking. Ditto on the excel tracking. Keep up the great job!

Fun series, partic for those of us who have shared your struggles in building sheds of our own. I see what you mean about your caulking skills…

I loved this series - very impressive.

This is the best channel for ever! I just love your passion, honesty and humbleness. Personally why you’re not at or above a 1,000,000 subscribers is beyond me. I know building what you’re building can be trial & error. Like everything else you do, it’s machine shop quality to me. Happy New Years Travis! See you in the next installment.

With the exception of the concrete, I built a 24x24 garage with a storage attic entirely by myself for our first house. It was one of the most enjoyable projects, but I hated doing the siding. Nice work and perseverance, looks amazing.

Loving the channel! I really like the one-of-a-kind built in sawdust clearer on your jigsaw at 8:00. 🤣 I have one a lot like it. The shed looks great!

I got cremasteric reflex when I first saw you on that roof Travis. You are braver, fitter and a lot more skilled than I am. Good job 🌞

I absaloutly love this shed build series. Please keep them coming.

Great work Travis. I miss that old Buc-ee's ball cap from your Texas days. Typically, the Z-flashing is used when joining two sheets of ply material such as T-1-11 siding vertically. But, I'm sure you know that already!

I cut a shallow dado in the back of my LP trim before installation, this allowed for a flat mounting over the nailing flange, and the small dado was filled before siding was applied.

Love watching this build. Just for others who may do something similar, you aren’t supposed to use caulking at the seams of hardie that butt together. Definitely when they meet a corner post, but not in the middle of the building. Hardie also says to prime/paint the edges when they butt together.

@ShopNation

Жыл бұрын

Well son of a gun 😂

@n2darkness

Жыл бұрын

And a piece of rectangular flashing goes behind each seam as well.

Next time, cut a rabbet in the back of the trim to allow for mounting screws and flanges. Then the trim will sit flush on the wall.

Installing the trim around windows that have the typical nailing fin, I do a relief cut using the table saw. The trim sits flat and tight to the sheathing. Siding looks better when the lines fit the building, not necessarily level. If "level" doesn't look level, it will always be seen. This is the time for the "fool the eye" application. You'll know. The roof ladder trick works on both sides ;-), build two. Rent or buy some scaffolding, cheap investment for preventing an event that could change your life. When caulking, keep a damp rag at hand for wipe down when you over do the bead, (cut a smaller piece off the tip= smaller, more control).

@ShopNation

Жыл бұрын

Great tips, thank you!

Looking good buddy , it’s a great series

So glad you figured out a safe way to roof it by yourself. I am thoroughly enjoying this series.

Loving ur channel mate u keep it funny without being too serious 👍

It’s funny seeing you deal with Ohio winters when you are used to Texas.

I feel your pain on the Hardie board front. LP siding is alot easier to work with!

The man cave is looking good.

Hey Big " T " great job so far calking is an art I do not have that at. If you get it on and it keeps out wind ,rain you have done a great job.

Looking great!!

Great look build. Looking forward to the next one

I have been enjoying this shed building series! definitely motivated me to just hire a company to do it.

@JohnnyG2573

Жыл бұрын

Ha! I have that’s that exact same thing

This is an amazing shed Travis. I'm thinking of doing this in my backyard as a home gym spot. Just have to see of my HOA will say anything. haha. Excellent work.

Looking good can’t wait to see it all finished

Dude, it looks awesome! I always look forward to your videos!

Here’s some fun facts, after the fact: Z-channel is customarily used between sheet siding, say on a gable end, where the 8’ sheet meets the angled cuts in the gable. Hardy siding should be pre-primed AND PAINTED WITH TWO COATS, before installation within 30” of grade. This includes the bottom edge AND the back. Because it will wick water and it WILL rot. Your warranty will be no good because you didn’t follow the manufacturer’s recommendations of installation. This includes siding edges up the wall. And no- nobody does this. Why no zip tape around the entry door opening? It was done around the other openings. 🤷🏼‍♂️

Great work so far. They make magnetic pads/shoes specifically for metal roofing.

I remember Kyle, over at RR Building, mentioning that he and Greg use special magnetic boots for getting around metal roofs a little easier. Probably not worth it for a small project like this, but something to consider.

@BillPairaktaridis

Жыл бұрын

Yeah, Eric Perkins also got a pair for a house they did. Plus they get harnessed in.

Are you going to do another end of year breakdown on the finances of the channel? I always look forward to those.

It’s starting to look like a thing! For your funky angle gap on the cedar soffit, I’d try a piece of cedar 1x2 or 1x4, with the angle notched out of the back. Make it like a flooring transition strip

Props for accomplishing this on your own it looks great.

Hey, I agree with you on getting that first coat of paint on now. That way you can get great coverage without anything attached to it

This is a great series. Great to see it coming together!

1:05 I see Mrs. Shop Nation was in charge of camera angles. ;)

I have been looking forward to this build. Keep it up brother and thank you for all the tips and advice.

I love the shed story already! I would prefer to work alone but sometimes it comes in handy to call a friend.

Your shed is really starting to come together. Great work!

Looking really good. I love the design.

Great job.!

Looking awesome!

Considering that 48 years ago my wife and I bought our first home. Three bedroom brick with central heat and air fully carpeted for $15,000. Makes this seems outrageously expensive in comparison.

Love the series!

Happy New Years to you and family, I wanted to say thank you for sharing your experiences. I can say I have definitely learned a lot from watching your channel. Look forward to what you have planned for next year.

Well job done. For your first time, good job.

Looks neat

The shed is looking great i really like the look of the front siding. Cedar also is a great choice i have used it on a few exterior projects as well.

Nice job but you have to wear a mask preferably a respirator when cutting hardiplank with a circular saw. It contains silica. What’s done is done though so this comment is more for people watching this thinking of working with it. If you are going to be cutting a lot, consider getting one of the drill attachments that snips the cement board and doesn’t create dust. Also, those screws you used aren’t made for hardiplank siding, they are made for cement backer board you put down under tile or on walls. Yes you can use them but Im sure they were a total pain to get started in those planks.

I admire your ambition in all of this!! I hope to do the same thing one day when we have some property with space. I built a small storage shed beside my house on my own, but it was much simpler than this!

Great work! Harbor Freight Hercules miter saw dust collection soon?

Another great episode. I was in Ohio once about this time of year.....froze my butt off. I don't know how you do it out there. Great job, way to be tough! Love the series BTW.

On the roofing shoe issue, take an old pair of shoes, clean the soles as best as you can and use skateboard grip tape or something similar for grip.

@ShopNation

Жыл бұрын

Grip tape will destroy the paint finish on the roof…

@DanielM-kz6gj

Жыл бұрын

A little let but Cougar Paws boots would be the way to go

Hopefully you made sure the feet on the ladder were dug into the ground with those low angles. Otherwise, the bottom can easily slip out on wet or soft ground.

Looks great! I’m about to lay down sub flooring on a 8x15 shed as well! Let the learning begin! Lol

@ShopNation

Жыл бұрын

Nice! Godspeed...lol

Great job 👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏 Blessings, Carlos ✝️🙏❤️😊❗️

Do you plan on putting finish on the cedar soffit? After seeing you do this, I am tearing out my old soffit and doing this. Such a cool look. Going to be pretty nice accent with the navy house and white deck. Great video again!

@ShopNation

Жыл бұрын

Yes, going to apply some clear deck sealer

11:20 I forgot to keep track of your feelings towards the foundation in the two previous videos.. I was thinking about it in this video, wondering if it'd come up. Was not disappointed.

Sweet!

"Construction Mediacracy" hahaha

Almost $15k in this shed. May God bless you with ad revenue my friend. Lol insane material prices these days

With another $1,000 or more in finishing stuff (paint, etc.), having a COMPLETE 'tiny house' (minus plumbing and electric) for around $16,000 is not bad.........

This series is so cool and has inspired me to do the same... in the spring LOL. Could the siding be nailed instead of screwed?

Hi! Great work. Enjoy the channel. Any possibility you will develop a dust collection adapter for either a single bevel or dual bevel Dewalt saw? You mentioned that in the Bosch or Ridgid video. Getting great ideas from your shed build.

I'm surprised you haven't added lights to the soffit on the porch roof / overhang . Maybe solar panel on the roof ?.

I watch for the ads, not the build.

You should have used the laser each time and then snap a line to avoid tolerance stack of being off on the previous course by a little here and there.

@rodbarron

Жыл бұрын

he should have? why? because you said so? get lost

Cyberspace paint? Love that color.

Just wondering. Hear a lot of the new direction and new workshop location but are the videos for this shed going to finish or is this all there is on the project? Like I said just wondering not complaining. Thanks for feed back if you can. Great job on all that you do. 👍🏻

@ShopNation

Жыл бұрын

Yes I will be finishing

Two things…. Schmoodging all that caulk is not the way to go. With a little time practicing (back wall) you would have learned to lay a nice bead of caulk. So much faster. Also there’s a company (cortex?) that makes a drill bit and plugs for pvc. Very nice.

This thing is a tint house man not a shed lol. Good work

awesome work, but that black paint on the PVC is going to crack and look like antiqued paint when the PVC expands in the summer. PVC is so dimensionally unstable ... if you butt it you'll have 1/4" gap in the winter when it contracts, and it expands like crazy in the summer months.

I know it's a little late now, but why not rent a bucket lift to do roof and high steep spots that are dangerous to do off ladders?

Yes!!!!👍👍👍👍

Happy to find the next chapter of your build in my feed! I have a question...what is the purpose of the small roof overhang on the side? Is that for private conversations with a friend? lol! Curious to know! Or was it just an afterthought? Love your vids and thank you for documenting the process. Cheers!

@wereno3769

Жыл бұрын

I believe he said in a previous video that area will be for storing firewood

@shmac96

Жыл бұрын

@@wereno3769 Thanks for the answer! I figured he might of said that in a previous video. Have a good day!