This is the best demonstration on KZread about fitting ovens into Ikea cabinets.

@PrideCZ

Жыл бұрын

Thank you 🙂

This is exactly what I needed to see. We are in the process of putting in exact same kitchen and helps to see how the oven shelves were placed. Thank you so much. 👍

@PrideCZ

2 жыл бұрын

Thank you for comment

@OnceIcaughtafiash

11 ай бұрын

How do you know how many rows up it is for each shelf?

Arrasou ! Também estou amando meu forno Gorenje e lava louças Gorenje SmartFlex. Felizmente , eles estão presentes aqui no Brasil 🇧🇷

@PrideCZ

2 жыл бұрын

Sim, o forno funciona bem

Thank you, it enabled to see that the IKEA kitchen guys "F-up" on mounting the specific shelves for both fridge and oven. Didn't take long to sort out. 👍

@PrideCZ

Жыл бұрын

glad you found this useful

Based on my understanding of the instruction booklet, IKEA's recommends the adjustable metal bracket should be at the bottom of the oven and the vented shelf should be above the oven (hot air goes up), if there is more than one appliance like in this case i think another urtusta oven bracket with adjustable bracket is required. Anyway as long as there is adequate support and ventilation I guess whichever way works.

@bastien4985

2 жыл бұрын

Yeah the metal bracket is definitely meant to be used with the much heavier appliances

@PetiteBluebirdgirl

Жыл бұрын

@@bastien4985 just fitted mine and got ikea to supply two more brackets has I am fitting two ovens. I fitted 1 pair of brackets at the bottom for the support of the 1st oven and then another pair of brackets on top of it with vent for my 2nd oven.

@bastien4985

Жыл бұрын

@@PetiteBluebirdgirl yeah it’s much safer that way. The standard prongs aren’t made to support an oven

@SirS001

Жыл бұрын

Hi, does the IKEA 'METOD / MAXIMERA' cupboards contents contain those steel oven supports? Or do they come with an oven? I hop e you can answer my question. Have a good day.

@DaveAndrewGoggins

9 ай бұрын

That’s what I thought 😅

ماشاء الله 👍👍👍👍

Paráda, děkuji. Až budeme instalovat troubu, Vaše video nám pomůže. Sláva Ukrajině! 💙💛

Hello, what is the strip you placed above the top oven? I need one of those in black.

Using a power drill for particle board furniture is just waiting for an accident to happen. Just just regular screwdrivers.

Question. Just installed oven and both left side plates on the ceramic field do not work. What could be the reason on the wiring?

Metal bracket should be at the bottom of the oven for support not at the top

El horno de gas no lleva huecos para ventilación????

ta kryci lista nad microvlnkou to je opravdu krasa, nakopat do zadnice za ni. to bych uz radeji koupil kryci panel a urizl tech 35mm z toho panelu

@PrideCZ

Жыл бұрын

Ikea už má stejné řešeni - FÖRBÄTTRA Krycí proužek a kování, barva nerezavějící oceli 002.533.99. uříznutý krycí panel vypadál ošklivě a navíc nasákavá vlhkost

this will not burn?

I have 200cm high oven cabinet, is this one same? how many screw holes up for first and second shelves??

@PrideCZ

Жыл бұрын

Yes_ kzread.info/dash/bejne/qYWOkrmldJjLY9I.html and kzread.info/dash/bejne/qYWOkrmldJjLY9I.html

Дякую!

добрый день как обстоят дела с отпечатками пальцев, сильно пачкаются фронты кухни?

Hi Gorenje, where did you buy the silver filler strips from please? Are those Ikea?

@PrideCZ

Жыл бұрын

You could use FÖRBÄTTRA - hhe stainless steel cover strip from IKEA 002.533.99. In my case i used floor cover strip from Hornbach shop Skandor 900 x 40 x 5

@PetiteBluebirdgirl

Жыл бұрын

@@PrideCZ thanks for that. I bought the Forbattra strip and it isn't good (they only have the one size and it looks like they hired an amateur to cut it). It is plastic and a grey colour.. Will do the same as you Gorenje. Thanks for the tip! 👍

Hi there. What is the exact internal measurement of the metod cabinet? On the website the only measurement for the width is 60cm and I imagine that's the outside width? Thanks

@PrideCZ

Жыл бұрын

IKEA використовує ДСП товщиною 18 мм, тобто 564 мм. З запасом краще розрахувати 560мм

Your kitchen looks great. Thanks for the tutorial and sharing your tricks 😀 It would be great if you can share the process of designing your ikea kitchen and a cost estimate or more details if you can. Subscribing for more helpful videos like these. Thanks again. 😊

@PrideCZ

2 жыл бұрын

I'll try to make that kind of video

Can you please tell me the dimensions of micro wave and oven boxes?

@PetiteBluebirdgirl

Жыл бұрын

Standard

@PrideCZ

Жыл бұрын

approximately: width 56 both, height for micro wave 46 cm (i had 47 + deco strip), height for oven 59 cm

@PetiteBluebirdgirl

Жыл бұрын

@@PrideCZ 😇👍

Do the appliances have to be from ikea

@PrideCZ

Жыл бұрын

No. I use compatible gorenje models

Thank you very much!

@PrideCZ

2 жыл бұрын

I'm happy

Nyatakan matlamat dan perlukan wang

The first oven is held by 6 screws and the second oven is held by a bracket and 18 screws? What is the point of putting two identical ovens on top of each other?

@MrMadChemist

3 ай бұрын

I wondered about the screws too... First oven is 60 cm in height, second 45 cm. Mostly this combination is a real oven (60cm) with all functionality, and a microwave/oven combination (45cm) next to it. For example there aren't any ovens that offer steam and microwave. so you'll need two. (and sometimes you could need two ovens at the same time right?)

@Saeglopur89

3 ай бұрын

He did shelves other way maybe because it's not IKEA devices but from Gorenje so maybe he needed adjusted one on top. Normally that one should be lower for owen which is heavier. Second device you are asking about is microwave

@michaelchannon2644

2 ай бұрын

@@Saeglopur89 Better to get a second oven shelf. The lower shelf isn't designed to carry an oven.

@Saeglopur89

2 ай бұрын

@@michaelchannon2644 Hmmm I guess you explained why IKEA gave me one or two more - I'm still putting all this together :O

@Saeglopur89

2 ай бұрын

@@michaelchannon2644 Ah no, that shelf is included already and it's bit different that shelf under and above microwave