Golf Shafts - WHICH ONE SHOULD YOU PLAY!?
Спорт
Golf shafts can certainly be an intimidating subject.
For this Friday onion drop I've visited the KBS Experience in Carlsbad and brought the resident club fitter David Anderson onboard to assist. Follow along as we reveal an easy to follow road map that will expand your knowledge on the key components when it comes to choosing the right shafts for your game.
There isn't a player type out there that Dave and myself haven't encountered and our wide scope means there's something in this content for all. We deep dive into feel and how that can impact players of certain ages V's time playing the game and when should you genuinely look to seek out a shaft fitting.
Be sure to dive in those comments and I'll do all I can to reply.
For more on KBS X and David Anderson's Golf Academy check out all the links below:
Book the KBS Experience in Carlsbad California:
kbsgolfx.com/
David Anderson Golf Academy:
dagolfacademy.com/
#subscribe to keep up with all things Trottie Golf:
KZread: / @trottiegolf
Instagram: / trottiegolf
Facebook: / trottiegolf
TikTok: / trottiegolf
X: / trottiegolf
Пікірлер: 116
Literally was googling shaft differences this morning. Perfect timing!
Great video with awesome content. Learned a lot for my next fitting. Thanks Trottie
Thanks for this video! Info I’ve been looking for!
STUNNING educational vlog, gents. Absolutely love this 👍🏻
Great info ! Got fit by big wave Dave this week !
Great video! I have just been fit for new irons with c taper 120’s in. It’s so true what you say about the low spin/launch not necessarily being the case. I tried $ taper but they were flying high and spinny, tried the c taper and they ended up being exactly where I needed to be numbers wise. Sexiest shaft in the world as well - bonus 🎉
Thanks for this. It’s nice to know this stuff going into a fitting. Science people like myself need to know physics of it. As usual, great video Chris!! 😉
Great video guys
i like kbs and mmt for my irons. as always pleasure to watch and learn
I love my C-tapers. Played stock stiff shafts for so long early in my days, got fitted into C-tapers went from about a 15 to a 9 handicap in one season. Great stuff here!
Got fit by David a month ago and he’s awesome to work with!!
Brilliant 😊😊
Great video. I wish I could properly hit inside an indoor hitting bay. My swing just feels weird and I can't do it. I have to do all of my fittings outdoors.
@hjm33
Ай бұрын
I feel the same way, I just can’t hit properly indoors
@TheBradleyp63
Ай бұрын
Same here. I can't seem to swing more than 50-60% effort and I shank balls with the irons. I haven't shanked a ball on the course in 15 years
I had c taper lites in stiff in my irons, I got refit this year and got the money taper lite in regular and gained 24 yards
Love the content keep it coming. I will echo the sentiment about how important shaft can be and how it is very player dependent. I am a PGA member and recently did a multi session iron fitting (*because the first session shaft winner made no sense). I am a 52 year old pro, but can still get to 110+ SS with driver. The best iron shaft of the session. by a decent margin was the Nippon Zelos 7 stiff. I did it again a week later, and then about a month later and the Zelos was the clear winner. Literally makes no sense at all, yet here we are. It's the reason why we go through the fitting process to see if there is something that feels better than others, performs better than others, and produces the results we are looking for.
I feel personally attacked by this thumbnail. 😂😂😂
@firemedic105ns
Ай бұрын
I feel like they are looking right at me with that thumbnail lol
@appleguy6708
Ай бұрын
Hey!?!
Trotie thank you for asking the simple questions, for us laymen. I really didn't know the whole truth about the weight of the shafts and its one of those things you can google and not get a good answer from a reliable source
Big wave Dave the legend
Playing KBS PGI 80 S in my irons Great shafts!!!
Big wave!!
I enjoy the Tour 120 in my irons but struggle in wedges. Might go back to DG for softer in butt around the greens
Congrats on 100k Trottie!
@trottiegolf
Ай бұрын
Cheers 🍺
I'm 6 foot 4 with a ~95mph iron speed and currently using +0.5 inch stealths with Regular flex lol. I have my first fitting in one week, I hope it brings me some consistency. I'm very excited.
@thews9237
20 күн бұрын
How did it go? We are same size..
@smevox7490
20 күн бұрын
@@thews9237 not bad. I got +1 inch s300. But really they didn't have the longer shafts to use. So was tough.
@livingtribunal4110
11 күн бұрын
@@smevox7490 Similar height here & wrist-to-floor is around 35.5"/36" I have my irons +0.5" and upright lie of 1.5° Im now in my 50s but used to hit with S300s about 15 years ago and switched to X100s a year later: no real difference that I could tell except better dispersion with X100s Took a LONG break from golf and returned this year. Decided to resume with S300s
KBS TD Driver/Fairway shafts are money!
Have KBS HI-REV G 80 Wedge shafts in all my wedges. Like them.
I wish fittings of this level were more accessible in more places. I just got fit into an inch longer c-taper 130. Now I’m wondering if I’m flipping at the ball and causing that high spinner, which might have gone unnoticed by the fitter.
To all club builders and to all club retailers, if everybody talked in CPM life would be much easier . And much less mistakes in buying the wrong shafts.
@trottiegolf
Ай бұрын
Some folks are massive CPM guys, I know KBSX checks everything for CPM during the building process. I think it's wise and don't disagree with where your head is at
One thing that is missing from here with KBS IRON Shafts is which of their WEDGE shafts pair well with each of their IRON shafts. Weight, stiffness profile, shot profile (LOW, MID, HIGH)
@DavidAnderson-mk3cy
Ай бұрын
That’s a great idea for a video we might do that next!
@trottiegolf
Ай бұрын
agree with @davidanderson-mk3cy great idea
Hello. Like your video. I am 60 years old and play off 10 handicap. What shaft should I be looking at if I want a light shaft and the head to be a little heavier. I get 230 at most on my driver. Playing tm m6 d type driver. I need shafts for my irons.
If I wanted to get loft, lie, and shaft fitted for my irons (and keep the iron heads) what's a good ballpark on price for that ?
Great to get some knowledge on shaft profiles. How long would it normally take an amateur with a proper fitter to figure out what type of shaft they'd be good with? I ask, because most amateur fittings we're given an hour, which flies by and you never feel like you've gotten a clear idea of what the good numbers are that you're being put into.
@trottiegolf
Ай бұрын
A good fitter doesn't need longer than an hour
5.5 rifles - Irons 130X $-Taper - Wedges 70X Speeder Evo VII - 7w 60S Tip’d 1” Ventus Red - Mini Dr 50S Speeder NX - Driver 115 Club Speed Stiff butt w/ heavy or small kick is the feel i care about. Play for feel and bomb it fellas!🤙🏽
I volunteer as tribute!!!
I literally just asked for this video on your last video 2 days ago… thanks for the quick response T !! 🔥 video as always !!
@trottiegolf
Ай бұрын
Filmed Q&A & Play today where I answered a ton of questions, gonna be a great vid
I've noticed in golf stores even pga super stores you can't just go in to most golf stores and buy a shaft for your driver . Wight for me is about consistent timing
In the intro it touched on this type of shaft being better for those with lack of mobility, but I missed it during the video. Anyone know the timestamp?
I'd add another time to get fit, after a long time away from the game.
I’m in the process of getting new clubs and the whole fitting thing for me is scary as I’m Not a great golfer. Seem to slice a bit and had Taylor Made Sim 2 max full set. I found the driver hard work and the irons heavy so need this time to make sure it’s set for me. Without seeing my game what kinda thing would you recommend? I also have purchased the tour aim so I can actually practice properly. I have been on the range a lot but it’s hitting off mats and also been practicing the wrong thing! Do you have any suggestions on using the tour aim?
@trottiegolf
Ай бұрын
Tour Aim user guide I'm actually filming tomorrow so that's all in hand. The whole shaft recommendation piece, honestly you gotta get a fitting. Look at the 105g weight as a start point but I'm loosely basing that off what I'm reading here. Very tough for me to nail it without seeing you hit it.
I play a +1 shaft stiff flex. Should I consider different shafts for different clubs? Maybe my long irons, should I get something with less spin to get more run out from vs my short irons that I need to stop?
@trottiegolf
Ай бұрын
Irons I'd keep in the same profile albeit I have seen Tour guys change the long irons V's short but for the most part proceed with caution into that space. Woods can be more specific and wedges can be more specific but irons for the most part keep the same.
Hey buddy been a long time since we play The challenge tour together I got a question in the tour van 3/4" off a driver tip is industry standard in the commercial side drive goes no trim straight in 🤔
@trottiegolf
Ай бұрын
hey mate. 1" off driver would be "standard" albeit I hate listed any kind of standard as obv you're playing around a lot with feel. But look if you need an absolute this is what I go off: 1" driver 1.5" 3 wood 2" 5 wood STR in Rescue 17 .25" or .5" rescue 19 .5" rescue 22 Hybrid shafts generally stronger in the tips so you don't have to go crazy on the tipping
6”4 and an inch longer, Is me to a tee 😂 playing Project X 6.0 hard stepped. Now thinking I should be in something lighter from that quick conversation 😅😅😅😅😅. Need to get re-fitted
@thews9237
20 күн бұрын
I was in same boat. Got 80 gram graphites. Swinging smoother and more distant and better dispersion.
Got fitted at Club champion for project x 6.5 iron shaft .looking for an iron shaft in the KBS line that’s equivalent to or similar to the project x6.5
@justgettinby8260
Ай бұрын
It may not be an exact comparison or even close but for me personally I alternate between PX 6.5 and $-Taper 130 and hit them both the same and have been for into both. I just go with $-T 130 bc I like the Black PVD color and it’s almost impossible to find the blacked out 6.5
@DavidAnderson-mk3cy
Ай бұрын
The project X6.5 is 125 g shaft. Or two most comparable shafts would be the tour V 125 S+ tour spec. And the $ taper 125 S+
Trottie, would a heavier shaft help to slows my right hand that closes the face ? Currently in a 6.5 125g
@trottiegolf
9 күн бұрын
It’s gonna be harder to turn over for sure
Trottie, what does the club manufacturer do to keep the swing weight close to D2/D3 when someone orders with a shaft that is maybe slightly heavier like a KBS tour 130 x? do they add weight down at the hosel? how do they keep that from messing with the club head balance?
@trottiegolf
Ай бұрын
yea you got it. Weight in the hosel during the build process.
@djcardwell
Ай бұрын
@@trottiegolf thank you
Is stuff in the handle softer in the tip bend point? If I wanted stiffer in the handle for higher launch how is that represented in the specs?
@trottiegolf
Ай бұрын
You'd play the same set up but your launch window would increase , or should I say your dynamic loft would change
I'm partially disabled due to a car accident 10 years ago. I'm 28 now and got into golf last year. I currently play a senior flex shaft, but i'm wondering if i'm limiting myself? I've been wondering whether I should look at a shaft change, I really want to add more distance to my shots. I know I need a proper fitting to know for sure what suits me best but any input and guidance would be appreciated. I really am a dummy.
@Adam-tm7qh
Ай бұрын
Weight is far more important for feel and timing, if you're new to golf you probably won't even be able to tell the difference with flex without looking.
@trottiegolf
Ай бұрын
Depends on your speed but I wouldn't rule out graphite to max out your numbers
Trottie, Im playing qi10 LS 9 at 8 dg Ventus Black 7x with left dash still spinning at 27 avg, Avg launch conditions AOA +4 SWP 0.2 right ftp 0.1 left . Spin still seems a bit high to me? Strike is middle to middle toe on a bad one
@trottiegolf
Ай бұрын
what's your launch ? You might be hitting it a fraction low in the blade. That's a lotta shaft.
@greasby1golf871
Ай бұрын
@@trottiegolf launch is avg 12.1
I just went from project x 6.5 to KBS tour 130 x + .5 inch they don’t feel as stiff to me but they feel good and a little higher ball flight never liked the feel of the c- taper they always felt awful to me for some reason
@DavidAnderson-mk3cy
Ай бұрын
The tour shaft and the C-taper are opposite shafts in our lineup. It’s no surprise if you like one you do not like the other!
Trottie please help. I have had poor fitting experience. Need real help. Got fit to KBS tour 120g S flex. 7 iron I’m right around 90mph club head speed ball speed120. Previously played project x rifle 6.0 and carried it 170.Now with these new shafts l'm only carry 155 160.Apexing at 135-140' launch at 24 degree. I'm assuming I'm just getting to high ball flight and loosing distance? Is it me and my swing or is shaft? Thank you!
@trottiegolf
Ай бұрын
Spin rate? Sounds like it could be over spinning, what ball are you playing?
How much does what type of tip vs butt stiffness in irons translate to driver shaft?
@trottiegolf
Ай бұрын
defo translates
Where does $ taper fit in on the scale?
@DavidAnderson-mk3cy
Ай бұрын
KBS tour is stiff under the grip C Taper is stiff in the tip section $ Taper is stiffest in the mid section on the shaft.
Can’t wait for further growth of graphite shafts. I don’t think steel shafts will exist in a couple decades
@trottiegolf
Ай бұрын
I think they'll exist but I do think graphite has come a long way
He could be Dean snells brother lol. Looks just like him.
What about spending more time on 75-80 mph swing speed 7 iron guys which is most of us. Lite weight steel shafts in the 85-100 gram range maybe. Seems like this is more focused on a Jr. golfer or faster swing speeds. What about spending more time on the average Joe?
@trottiegolf
Ай бұрын
Fair and we can loop back into that specific weight / speed for sure.
Wish we had this level of fitting in uk.
@trottiegolf
Ай бұрын
I hear on the grapevine that there could be a new facility opening near north London. Not sure it's common knowledge so I'll stop there. Might wanna get on my mailing list and I'll keep ya posted.
@phildormergolf
Ай бұрын
North London is very local so keen to hear more
So is my C Taper 110 lite no good for a player only just breaking 100?
@trottiegolf
Ай бұрын
Not necessarily, it'll keep the flight down a bit for sure
@mrmatt8949
Ай бұрын
@@trottiegolf thanks Trottie. They’re just so pretty 🤣
after watching this, i need to go back and make sure i shouldn't still be playing my grandpa's old graphite irons. EGO CHECKED!
@trottiegolf
Ай бұрын
🤣😂 Granpa was a PLYR for sure
Trottie said arm length is proportional to height. Not necessarily. Some people have gorilla arms (me) and some T-Rex arms. How would you find the correct shaft length for outliers?
@trottiegolf
7 күн бұрын
I've always gone of a dynamic fit and studied strike, if a player doesn't strike it well then static fitting charts for shaft length are available.
@davidfoulkes1377
6 күн бұрын
@@trottiegolf Thanks. As a starting point, particularly for absolute beginners, have you ever considered putting someone in the correct stance and using that to establish appropriate club lengths?
@trottiegolf
4 күн бұрын
@@davidfoulkes1377 visually looking at how someone addresses the ball is part of the process when working with an early golfer
This has probably been said a million times , but how cool would it be to get a fitting by these guys.
@trottiegolf
Ай бұрын
www.trottiegolf.com get on the mailing list, it'll happen one day I'm sure
I wanna see a tour player fitting. Someone, anyone playing with Taylormade.
@trottiegolf
Ай бұрын
kzread.info/head/PLvIicwIlRWrm0nj1hAFRHw3fbMM8MLWO8&si=CAh5FBZf5L5Pa64I Try this
And Tour Lite??? Stiff 100 gram.
@Trump2024Kentucky
Ай бұрын
Odd they don’t even mention the lighter weight steel options.
Why did you have to call me out like this with the title.
Was 95% talking 🤷🏼♂️
@trottiegolf
Ай бұрын
yup, this one off vid needed to be that
What a waste...
ayyyyy our guy 🫱🏻🫲🏼
I dont like a heavy shaft. I like light shafts, i add lead tape to the heads on my irons so i can feel the head
People would be surprised at the amount of regular and stiff that are on tours worldwide. Also after 29 yrs as a professional, weight is king not necessary flex...
Dang! Maybe I don’t need my 130x’s 🥹
@trottiegolf
22 күн бұрын
lotta golf shaft