Locks configurations guide:
Note
* is use for cancel and back.
is use for accept or ok.
Press * then # is use for open menu.
Step 1 : Change motor direction (Optional)
Check lock direction: if you press lock icon on display and bolts are coming out and on pressing fingerprint going inside then ok if this is on reverse function then press 888#12#. To change motor direction.
Note there are two type of user
1. Admin (123456 default password) who can change every setting in lock.
2. User: Only for open lock.
Step 2 : (do fast)
• Press * then # is to open menu.
• 123456 then #. (123456 is default password)
• Find add user number. Select add admin by click on respective number.
(* is use for cancel and back. # is use for accept or ok.)
• Select password: type any 6 digit password then # (two times). Next time 123456 not working use this password to login menu. (*#YourPassword# to open menu)
• Select fingerprint: touch your finger around 6 times with same direction till its says press again.
• Select card: touch your card to number 5 after selection of card from menu.
• Select face from menu and scan your face from front of the lock.
On performing any registration of user a unique id is generated with lock from number 1. You can delete any user by pressing there id from delete user menu.
Note. If you are login from any id and you want to delete that particular id that’s not possible.
You can select any options from menu as per your requirement, don’t change anything if you are not aware about that function.
Reset : Anytime you can reset the lock from the menu.
Any problem in this : call on 18001237255 10 to 6 Monday to Saturday.