that, is one BEAUTIFUL chevy van. it's, got a lot of streamline look. thank, you for you're video. Random vanners east coast VA. 2%

Always good to pressure wash all the dirt and rusty flaky stuff. Make's for better working. Definitely would have changed out the brake hose.

@beardedvanadventures

Ай бұрын

I agree and most of them are changed now ..cheers

I am kinda late to the party but good video. I will share my experience with you as I have done this procedure dozens of times on GM vehicles. When you pound on the spindle to break the balljoint loose put another large hammer on the opposite side of the spindle and it will release much easier when the pounding just does not absorbed into the suspension. As far as the lift amount of the spacer it will be more than the height of the spacer because the coil spring is only about half way out of the suspension travel fulcrum . You can see this if you run a string from the control arm cross shaft bolt at the frame out to the wheel. Keep up the good work!

@beardedvanadventures

2 жыл бұрын

Thanks for the tip 👍

@beardedvanadventures

2 жыл бұрын

Thanks for the advice !

Nice video. I’m doing the same on my 94 g20 right now. How did you get the lower control arm low enough to fit the uncompressed coil and spaced in there?

@beardedvanadventures

6 ай бұрын

Lower control arm drops down as much as you need

✌ love, all.

what, ever you do to you're van it's good.

@beardedvanadventures

Жыл бұрын

It's a Beaty !! Thanks

Did you modify your hub caps at all? I have the same wheels on mine and the front hubs stick out too far for the hubcaps to fit proper. I have the black caps off the SS truck but I think the dimensions are the same for chrome. Maybe I just need to flatten that spindle nut cover. I think I need about 3/8" or so.

@beardedvanadventures

Жыл бұрын

Ya they sit on the dust cap a bit ..i did flatten it a bit .

Man, I can't seem to find lower control arms anywhere for my G20. I broke the shock mount off. Sucks. They don't make them anymore and the junkyards are empty around my area!

@beardedvanadventures

Жыл бұрын

Ebay bud worst case scenario..where ya from ?

Try a spindle lift. Factory ride, more lift, doesn't put the ball joints and rod ends in a bind.

@danielburke4351

Жыл бұрын

No one makes a lift spindle for the G-vans. Have to modify a C10 spindle.

@beardedvanadventures

Жыл бұрын

I'm trying to indicate a spindle lift ,any idea where to get one ?

@nunyabidniz8126

Жыл бұрын

@@beardedvanadventures it won't be for a van. Like Daniel said look at the c10 truck spindles. Shouldn't be much of a varient if at all. When I'm junkyard hopping I'll try to see if there is a difference.

@beardedvanadventures

Жыл бұрын

So buy a c10 2 wd spindle lift and modify them ?

@nunyabidniz8126

Жыл бұрын

@@beardedvanadventures I'll check for you. I want mine dropped a little with spindles.

Are they still holding up? Does it make the ride rougher at all?

@beardedvanadventures

Жыл бұрын

I have been running the roads like crazy..drive it every day ,specially since the LS swap , and I'm totally happy with the budget lift and now 31" tires ..very happy my friend ! Keep on vanning

@johngate4715

Жыл бұрын

@@beardedvanadventures dang do you have a link to the kit. I have got a 1995 GMC vandura I am fixing up. It is so low to the ground. I am also not sure what types of tire sizes can fit on it.

Any issues with dialing in the front alignment?

@beardedvanadventures

2 жыл бұрын

I didn't have it aligned yet but the camber needs adjusting a bit...I may look into the c10 lift spindles and modify them to fit

It came apart fairly easy It could of been way harder!🤔

@beardedvanadventures

Жыл бұрын

Absolutely !

Do you want to buy another one I have one for sale in summerfied fl and I think a friend put it on Craigslist for twice the amount I was and am selling it for

@beardedvanadventures

2 жыл бұрын

Good day sir , vans are popular at the moment but one is enough for me thanks !

Where did you order the spring spacers and u bolts?

@beardedvanadventures

2 жыл бұрын

From ebay , 30$

you should remove the rust first!!!!!!!!!!!!

@beardedvanadventures

11 ай бұрын

I like rust !!!!!

Hardly seems worth it for front air shocks b easier

@beardedvanadventures

2 жыл бұрын

For the extra 1.5 " your right it was a lot of work but I'm not a fan of air myself..not sure

Nice van!!! What year is it?

@beardedvanadventures

2 жыл бұрын

1986 👍

what size tires did you add? sorry to ask, no sound at work:)

@beardedvanadventures

2 жыл бұрын

No prob , I'm still on 235/75 /15 but going with 31" I think ..not crazy big

@jamesstarr18

2 жыл бұрын

@@beardedvanadventures Do you happen to know anyone who has done a 4x4 conversion on one? I have a V6 and want to upgrade to a V8 so since the body would be up in the air I thought about a 4x4 conversion.

You just ruined all your suspension Dynamics by putting a spacer in there you'll say you'll be needing a flip tie rod ends and all the garbage I did it on Astro messed it all up took it all apart went back stock did a body lift its perfect screw them suspension list they don't work you'll ruin the Dynamics of that steering you'll see

@beardedvanadventures

Жыл бұрын

Thanks for the advice, over s year later I'm quite happy with it and have upgraded my tires ! Cheers 🍻