What position are the cam flats? What oil pump dot is lined up with the crank? Lots of info missing here

Excellent video, I just have one question: what position are the cams in? I have a problem with a Cadillac SRX, I can't put it in time and I would like to try this method. Thanks for your help

Hate to be there when it's time to start it 😂

please tell me GMC acadia 3.6 when overclocking, the engine will turn on a little, what could be the reasons.thanks for the answer

Surprised you don’t use any assembly lube on the guides where they meet the chain. Great video though.

So you have the flats of all 4 cams up? Preferably with the locking tools? If you can do it this way why do people cycle through the stages? I didnt think about the 2nd stage chain doesnt care where the colored links were but they still seem to line up with the marks.

@IFixCrap2094

Ай бұрын

Basically stage 1= left side camshafts relaxed. stage 2=right side camshafts relaxed. Follow the stages if you don’t have the locking tools. The stages are used so the camshafts don’t spring while removing the chains on each bank

Good video.

Are the cams in the position that you removed the chains ?

@GSPerformance-mg2wm

3 ай бұрын

Not quite, had to adjust them

I call 4 shop recently no one wanted to do that job

It is all about cam timing .. you had missed it ....

This is you tube at it's finest. Why show the wrong information. You have to set bank one chain first then you skip the process to show you have to turn the engind slightly to set the bank two chain.

@camarozone2751

25 күн бұрын

I swear almost all the videos literally skips that part

I dont think this is the right way

I think that is NOT THE RIGHT WAY!!!