GM V8 5.3/6.2 High Pressure Fuel Pump Replacement Step By Step

Ойын-сауық

This video covers step by step of a GM 5.3L V8 and 6.2L V8 High Pressure Fuel Pump Replacement. Please subscribe for more!

Пікірлер: 20

  • @rikgriffin6632
    @rikgriffin66324 жыл бұрын

    Well done sir.

  • @hausmanaaronw
    @hausmanaaronw2 жыл бұрын

    I have no engine light or codes or running bad. I do have fuel dripping out the back of the engine. I think it's been apart before and they didn't replace the high pressure lines. You think that's what could be leaking? Does the fuel pump ever leak externally? I'm just trying to narrow this down to a couple of items before I tear it down so I know what I'm running into as far as cost. Thanks for any input.

  • @kkc1577
    @kkc15772 жыл бұрын

    Awesome video! I need help. I am getting a steady 45 psi on my car 2011 suburban 5.3. I feel like its dumping fuel because my fuel gauge goes down more than normal. I see everyone else mention 50 to 60 at the rails but i am using my expensive x431 scan tool to check everything. All of a sudden after 1 month of using e85 its been extremely bad. Fuel gauge drops fast. I cant find no wet fuel leaks by the engine compartment. My mpg normal at 15 to 18. Now feels like 6. I am also using a scan gauge to read the mpgs and its not bad hwy is 18mpg both dash and scan gaugeii. What the hell is there a small leak some where only when its on?

  • @EvansEVentures
    @EvansEVentures3 жыл бұрын

    You mentioned that it needed to be on top dead center but you didnt put finding TDC in the video at all. So did you do it?

  • @educatedredneck3342

    @educatedredneck3342

    2 жыл бұрын

    Instead of messing with the cylinder you can buy a tool which is probably what he did. OTC Tools 6710. It sits in where the pump is. As you rotate the engine it will sit flush when it's in the correct position.

  • @hernandezizra4095
    @hernandezizra40953 жыл бұрын

    Everything good but the question is , Why did u replaced it ?? What was the issue on this truck ??

  • @Pete_Tech_

    @Pete_Tech_

    3 жыл бұрын

    See the video prior to this one on my channel! The diagnosis is a separate video, common fuel trim codes that will usually appear confirming the failure of the pump!

  • @python929

    @python929

    2 жыл бұрын

    @@Pete_Tech_ The first video mentions the PIP from GM. Do you know the PIP that’s referenced?

  • @angelomartinez8242
    @angelomartinez8242 Жыл бұрын

    Where are you located? I rather have you do it lol

  • @Pete_Tech_

    @Pete_Tech_

    Жыл бұрын

    Minnesota brother!

  • @buckster6969
    @buckster6969 Жыл бұрын

    Does anyone know where the fuel pressure regulator is located? My 2015 Silverado 5.3L just gave me code p228D which is the fuel pressure regulator

  • @Pete_Tech_

    @Pete_Tech_

    Жыл бұрын

    Needs diagnosis. Most likely needs a HPFP!

  • @jameswalton8927
    @jameswalton89273 жыл бұрын

    how much do it cost at the dealer to replace?

  • @FloridaMan-kp5bk

    @FloridaMan-kp5bk

    3 жыл бұрын

    james walton, i just got it priced at the dealer since mine went out recently. for my dealer to buy everything and install was $960 + tax.

  • @tonyowens2916
    @tonyowens29163 жыл бұрын

    Is it a dealer part?, because I'm not finding it on any auto parts websites, maybe I'm not calling it by the correct name, what would it be called besides high pressure fuel pump?

  • @tcdash2963

    @tcdash2963

    2 жыл бұрын

    There's 2 sensors not just 1 this is high pressure fuel rail pressure sensor, also he took alot of unnecessary steps

  • @eastcoastkickz4891
    @eastcoastkickz4891 Жыл бұрын

    How did you know this was the problem? Any symptoms

  • @Pete_Tech_

    @Pete_Tech_

    Жыл бұрын

    Check out the channel. Video before is Diag.

  • @rossgooding7423
    @rossgooding74232 жыл бұрын

    take it to the shop.... way to much fiddling...

  • @lovebigbootie69
    @lovebigbootie692 жыл бұрын

    Wash engine bay first! GEEZ!