The Glock owners manual clearly tells you not to clean the copper lubricant off.

@rangerdanger10

2 жыл бұрын

Lol.

@Nordraw

2 жыл бұрын

Exactly

@BrunoSkiba

2 жыл бұрын

Came here specifically to say that. They specifically address the copper based factory lube and to clean the bore prior to first shooting.

@byjfghgftf9359

2 жыл бұрын

Just got my 43x does this guy know what he is talking about?

@buddymartinez4952

2 жыл бұрын

@@byjfghgftf9359 there is definitely better videos on how to clean your Glock. Keep in mind all Glock’s are the same. So I would just try to find one on how to clean your Glock rather then using the specific model.

As a Glock Armorer I can tell you with 100% certainty, do not take this guys advise at all! This was wrong from the start.

@Jugg215

Жыл бұрын

literally a couple seconds in i wanted to slap this goofball lmao

Like others have said, the Glock owners manual tells you specifically not to clean the copper color lubricant. Why would you recommend this?

Your supposed to leave the copper lubricant in the slide. The more you shoot the more it works it’s way into the slide and provides long term lubrication.

@byjfghgftf9359

2 жыл бұрын

So don’t listen too this guy?

@zae.av04

2 жыл бұрын

@@byjfghgftf9359 no don’t

@mikeysworld4720

Жыл бұрын

My Glock didn’t come with any copper lubricant

This is the exact same gun I have! I love it! I took mine to the range without cleaning, but it shoots amazing! It’s Very light weight and small enough for my little hands! Thanks for sharing how to clean it! 💥🔫❤️

@QueenOfTopicsTv

2 жыл бұрын

@Big Smoke I called Glock and they said it was fine to shoot without cleaning because they come with a lubricant already. Now as time goes on after shooting of course you’ll want to keep it clean.

@speedy_withthe_demonz

8 ай бұрын

gun store owner actually told me DO NOT clean until you have shot through all the lubricant glock puts on

@QueenOfTopicsTv

8 ай бұрын

@@speedy_withthe_demonz Exactly that’s what Glock told me as well! You should not clean a new gun as they are already lubricated! That’s correct!

Internet “experts”

My goodness! Why are you teaching against the owner's manual?

Thank you for this. I’m one of the new gun owners and needed this! My exact gun too!

@silentwatcher8893

3 жыл бұрын

This is unnecessary. I been shooting glocks for over 25 years and I have never done this to a new Glock. The owners manual also states to leave this on the weapon. This guy is crazy !

@tudortactical532

3 жыл бұрын

@@silentwatcher8893 Pg 26 of My glocks handbook states "Your GLOCK pistol should be cleaned and lubricated as follows: 1. When brand new, before the first time it is fired." This is from the instruction handbook that comes with every Glock pistol.

@fabiencharles2922

2 жыл бұрын

@@tudortactical532 you're a nut.

@willyjohn6352

2 жыл бұрын

@@fabiencharles2922 🤣🤣🤣

@DavidLLambertmobile

2 жыл бұрын

I'd suggest Slip 2000 725 cleaner-degreaser for general cleaning. For CLP, I use Clenzoil. It has no harsh fumes. I also use Slip 2000 EWL. I use bore swabs then add a few drops of gun oil. Avoid huge amounts of gun oil, CLP. Polymer frame guns do not need tons of product.

I'm getting this for my first handgun and edc will definitely do this

@tudortactical532

3 жыл бұрын

Great! It's as easy way to assure you will have minimal issues with your new firearm. Best of luck and always be safe.

@jonathanschmidt417

3 жыл бұрын

Lightly clean the gun leave the copper/C5A in

@doseofzaza

2 жыл бұрын

Don’t take the copper lube off like this guy did not smart at all you won’t be able to actually tell a difference but it will add years to your glocks life if you just let it work into the slide like the manual says all you should do it wipe it down and very lightly oil it where your handbook says you should put it

It says in the Glock handbook specifically to leave this oil in

@tudortactical532

3 жыл бұрын

Pg 26 of My glocks handbook states "Your GLOCK pistol should be cleaned and lubricated as follows: 1. When brand new, before the first time it is fired." This is from the instruction handbook that comes with every Glock pistol.

@BA-fb8tz

3 жыл бұрын

@@tudortactical532 Yes but page 28 also states: "Note: The copper colored lubricant on portions of the slide of brand new GLOCK pistols is intended to help provide long- term lubrication and should not be removed." You also didn't "physically (with your finger) check to make sure there is not a cartridge in the chamber, as fully described in the Unloading Procedure and Safety Check, Chapter 8 (Pages 19-20)"

@igorbakovic5451

3 жыл бұрын

@@BA-fb8tz he also shouldn't put oil on the back of the slide. He removed the factory lube. And then he put on his own lube where he actually shouldn't. Doesn't make sense.

@jeffbill6670

3 жыл бұрын

@@igorbakovic5451 hey man could I leave the factory Glock solvent or whatever it is and use hoppes 9 with it like on the plastic part of the gun

@igorbakovic5451

3 жыл бұрын

@@jeffbill6670 Don't put solvent on the plastic parts of the gun.

I don’t normally comment on videos but great video bro! I seen a video earlier today and it said not to clean the copper line off just put lube on top of it and after research exactly like you said clean it off

The copper grease is for longevity. You really should leave it alone.

@tudortactical532

3 жыл бұрын

Pg 26 of My glocks handbook states "Your GLOCK pistol should be cleaned and lubricated as follows: 1. When brand new, before the first time it is fired." This is from the instruction handbook that comes with every Glock pistol.

@wpsblake

3 жыл бұрын

@@tudortactical532 incorrect

@wpsblake

3 жыл бұрын

@@tudortactical532 it DOES state that, but it specifically ALSO says to not clean the copper colored grease 🤦

@wpsblake

3 жыл бұрын

It's also for helping to break out on I heard, but longevity could be true.. idk

@doseofzaza

2 жыл бұрын

@@tudortactical532 it does say that but it also says not to clean the copper lube it works into the slide over time

Do not I repeat do not remove the lubricant Glock puts in the gun.. it’s for the break in period of the gun

@tudortactical532

3 жыл бұрын

Pg 26 of My glocks handbook states "Your GLOCK pistol should be cleaned and lubricated as follows: 1. When brand new, before the first time it is fired." This is from the instruction handbook that comes with every Glock pistol.

@stevolene

2 жыл бұрын

I always just put a dab of oil on the slides, very little, never heard of removing the factory lube, confused now

This video helps thank you

This guy doesn’t know what he’s talking about

@tudortactical532

3 жыл бұрын

Pg 26 of My glocks handbook states "Your GLOCK pistol should be cleaned and lubricated as follows: 1. When brand new, before the first time it is fired." This is from the instruction handbook that comes with every Glock pistol.

@BA-fb8tz

3 жыл бұрын

@@tudortactical532 Yes but page 28 also states: "Note: The copper colored lubricant on portions of the slide of brand new GLOCK pistols is intended to help provide long- term lubrication and should not be removed." You also didn't "physically (with your finger) check to make sure there is not a cartridge in the chamber, as fully described in the Unloading Procedure and Safety Check, Chapter 8 (Pages 19-20)"

@humanoidweapon6260

3 жыл бұрын

@@BA-fb8tz lol 😆 imagine

Your not supposed to take off the Glock grease

@tudortactical532

3 жыл бұрын

Pg 26 of My glocks handbook states "Your GLOCK pistol should be cleaned and lubricated as follows: 1. When brand new, before the first time it is fired." This is from the instruction handbook that comes with every Glock pistol.

@liquid7315

3 жыл бұрын

@@tudortactical532 yeah, and on page 28 right after step 8. It says : SLIDE: ( Note: The copper colored lubricant on portions of the slide of brand new GLOCK pistols is intended to help provide long term lubrication and should not be removed). Everyone is giving a hard time, but they are right as far as what the book says and you are too, you just missed that part. I don't think it should really matter though, plus... that was a lot on yours, mine just had it on the actual rails.

@mikemcintosh295

Жыл бұрын

​@@liquid7315 problem is he won't admit he's wrong

Leave that C5A in

@tudortactical532

3 жыл бұрын

Pg 26 of My glocks handbook states "Your GLOCK pistol should be cleaned and lubricated as follows: 1. When brand new, before the first time it is fired." This is from the instruction handbook that comes with every Glock pistol.

Why would Glock put the copper lubricant in there just for new owners to clean it off? Why put it in there in the first place? 😶

@mikemcintosh295

Жыл бұрын

You're not supposed to clean it off

Lollll that grease stays in there until you really need to clean it after putting some decent rounds through it. 🤦‍♂️

@tudortactical532

3 жыл бұрын

Pg 26 of My glocks handbook states "Your GLOCK pistol should be cleaned and lubricated as follows: 1. When brand new, before the first time it is fired." This is from the instruction handbook that comes with every Glock pistol.

Glock recommends leaving that on there my dude.

Do NOT remove the copper based lube. Let it wear in. It aids in the fitting of the moving parts during break in.

That copper stuff is top shelf leave it in their Fudd.

@tudortactical532

3 жыл бұрын

Pg 26 of My glocks handbook states "Your GLOCK pistol should be cleaned and lubricated as follows: 1. When brand new, before the first time it is fired." This is from the instruction handbook that comes with every Glock pistol.

@cc131195

3 жыл бұрын

The copper is good for the firearm longterm. It says your supposed to leave it in there.

@mykiahdale

Жыл бұрын

@@tudortactical532and if you actually read the steps you'd know that one of the steps on pg.28 tell you not to remove the copper lubricant

How about showing a brand new Glock owner how you got the slide off?

@speedwayman100

2 жыл бұрын

release your magazine,lock the slide back to make sure there isnt a round in the chamber,when it's clear release the slide, then pull the trigger in a safe direction,then wrap your hand around the back part of the slide and pull it back maybe 1/4 inch at most and pull down on the two slide releases one on each slide at the same time and bring the slide forward and it should come off.

@DavidLLambertmobile

2 жыл бұрын

The 1 point I'd add is the Glock Store brand Slide Lock is a excellent after market part. I add Glock Store slide locks to my Glock pistols. They are durable & make field strip easy, smooth.

Idk if your still here or not! But pls give us a 43x or what ever glock you got a cleaning tutorial pls and thank youu

Do not clean off to copper like substance from off of the rail !!!!!!

I’ll bet your wife loves seeing this on her tablecloth. Lol.

@jamesfield6568

3 жыл бұрын

It's not her tablecloth.

great vid man, very thorough

@tudortactical532

2 жыл бұрын

Glad you liked it!

Why would it hurt anything to leave it

Lol, dude keeps insisting that while u do have to clean n lubricate gun, he includes cleaning the copper off too..😂🤣

Noooo don't take that copper off. It will go away on its own.

What happens if you don’t clean before range shooting?

@YourService79

9 ай бұрын

There is no reason to clean and lube a gun that is brand new, they are all cleaned, lubed, and fired twice to make sure they function properly.

So what if you DIDNT clean your new gun before the range then happen to put 150 rounds through it. Using 115 grain and had 4 jams? Will that damage anything? Asking for a friend…

@tudortactical532

2 жыл бұрын

Highly unlikely that it'll damage the firearm, just may be the reason you had a few jams. I'd suggest cleaning and lubricating the pistol and getting back out there for more practice. Best of luck!

WWLMD-- what would Lenny Magill do

You speak confidently about things you don’t know.

When you get to the step where you have to deliberately pull the trigger to disassemble your Glock remember that you don't need to do that on an HK Beretta or Sig Sauer Striker Fired semi-auto. It's a dangerous design flaw that Glock has refused to correct even after five generations.

@murkyturkey5238

2 жыл бұрын

Yeah hopefully your gun is unloaded before you’re taking it apart

@Valorius

2 жыл бұрын

@@murkyturkey5238 we all know the weak point in any safety system is the human being operating it. Ask any ER nurse or doctor.

@mikemcintosh295

Жыл бұрын

If you're not competent to check your chamber before pulling the trigger you're not competent to carry a gun.

Good effort bad advice. Plus Rem oil causes issues with dirt and powder sticking on slide. Ruger customer service told me years ago to use slide grease NOT oil.

Black mat with a black handgun, poor lighting and a camera that wouldnt focus when showing detailed areas. Could have been a lot better if you focused on these details. Great commentary though.

@tudortactical532

2 жыл бұрын

Thanks for the feedback! I will hopefully get better as I go along making new videos.

You didn’t even show or demonstrate how to take the gun apart!???????

🤐🍔

wrong!

Sure glad I am not you friend. The copper stays until it wears off by its self. Living proof you should read the owners manual.

This guy doesn't have a clue. Leave in the copper-based lube per Glock's specific instructions in the manual. More importantly, I'm pretty sure that removing the copper-based lube could potentially void your warranty. Feel sorry for his buddy.

Lolz....