I hope you enjoyed this installation video. I really loved the output from this project. Feel free to ask. Suggestions are also welcome 🙂 ================================= Don't forget to SUBSCRIBE so this channel can grow! kzread.info

@pabloescobar7959

2 жыл бұрын

Any effect on the engine

@akashpanchal8911

2 жыл бұрын

Any effect on the engine?

@akashpanchal8911

2 жыл бұрын

And whats your height bro?

@LonRider

2 жыл бұрын

None so far :)

@LonRider

2 жыл бұрын

I'm 5'4 :)

"Braaaaaaap" beautiful sound, boss 🔥🔥🔥🔥🔥🔥🔥

@LonRider

3 жыл бұрын

Salamat boss! ✌️

@shivpreet4102

3 жыл бұрын

Exactly

Solid paps 🔥

@LonRider

3 жыл бұрын

Salamat paps ✌️

Excellent video

@LonRider

3 жыл бұрын

Thank you bro!! :)

Perfect sound

@LonRider

8 ай бұрын

Thanks man! 🤟

@vena1680

8 ай бұрын

@@LonRider still running the exhaust till date bro??

Salamat sa upload sir

@LonRider

2 жыл бұрын

Thank you sa support!! :)

Nice job, looks great, the only thing I didn't like about the bike was the look of the stock exhaust.

@LonRider

3 жыл бұрын

Thanks anyway ✌️

Solid talaga bossing!!

@zero_pain0859

3 жыл бұрын

San nyo nascore yang yoshimura bossing?

@LonRider

3 жыл бұрын

@@zero_pain0859 salamat bossing! FB marketplace lang boss, hanap ka na lang ng matripan mo ✌️

Hi, I could not see on the video, but what happened to your lambda sensor? Did they install it on the new header pipes, or you just removed it? I'm very interested because I just ordered header pipes from China, and I see that there is a plug for lambda sensor on them. Hrvoje

@LonRider

2 жыл бұрын

Yes, we installed one also on the new headers. Good for you, you have it already :)

Great video covering the entire process. Since it is a full system, did you do an ECU flash ? How much does this exhaust cost ?

@LonRider

2 жыл бұрын

Thanks man! No, haven't done a reflash yet since there's is no available high flow air filter yet. They should go hand in hand for optimum perf. The exhaust cost more or less $160 :)

@shellysheniljacob4075

2 жыл бұрын

@@LonRiderbmc oval fmsa50-660 air filter for 250cc

good sound !! 😀

@LonRider

Жыл бұрын

Thanks bro! You can subscribe to the channel for more content :)

Bro, I was wondering if it's possible to just get a slip on exhaust. I got a naked gixxer too and I'm just not a fan of the look of the stock exhaust tip.

@LonRider

2 жыл бұрын

Yes you can, you have to cut the elbow between the tip and the catalytic :)

We need more videos of gixxer

@LonRider

3 жыл бұрын

I will create more in this channel :)

power serrrrr

@LonRider

2 жыл бұрын

Werpa!! :)

sound of this motocycle like moto with 1silinder like byson or cbr150, gixxer250 sound not like moto with 2silinder like sound of ninja250 and yamaha R250 ,right??

@LonRider

3 жыл бұрын

Gixxer 250 is single cylinder only. So this sounds like other 150cc (ex. Cbr, fz, duke200, etc)

Sir, did u cancel the mid-ship, is it need to cut the stock band pipe? To make full installation exhaust?

@LonRider

3 жыл бұрын

The whole exhaust is replaced with a new one✌️

I'm having self relay issue is anyone having the same? What to do for that? I'm still wondering when I start my bike it rolled down with the self motor then only my engine come up with the full throttle it took around 5-7 seconds to start my engine

@LonRider

3 жыл бұрын

Check your battery if low on power. Also check your spark plug and starter switch if dirty

@theoptimistview

3 жыл бұрын

@@LonRider will give a try but it's new

Can it be installed on the Vstrom 250 SX that also comes with the same engine and exhaust ?

@LonRider

10 ай бұрын

It should also fit :)

pulido paps.good job.idol ko rin mga gixxer tlga..lakas.ride safe paps.

@LonRider

3 жыл бұрын

Salamat paps! RS✌️

@Bozztv1987

3 жыл бұрын

@@LonRider ♥️✌️

Hi bro, can you share about the crash slider installation? the slider for gixxer is quite hard to find in the market. Tq

@LonRider

Ай бұрын

Sorry I don't have a video. My sliders are custom made here in PH 🤟

🔥 Love from Bangladesh I have the 155 cc one

@LonRider

3 жыл бұрын

Thanks bro! I also had the 155 version before this one. Both are fantastic bikes :)

@nihadafk9674

3 жыл бұрын

@@LonRider My dream - Gixxer 250 FI ABS KTM Duke 390 Gsx s 1000 But our country has 165cc limitation 😑

@LonRider

3 жыл бұрын

Those are nice bikes! Is the limitation due to the license restrictions?

Hey bro! Did u get any mileage issues after this mod? Or any issue at all? I have a SF250 and would like to change my exhaust but a bit skeptical😅

@LonRider

3 жыл бұрын

No issues at all! In fact, I got better mileage during long rides due to weight savings. So go for it :)

@nikkywithBL

3 жыл бұрын

@@LonRider thanks brother ❤️

Salamwalaykum...Watching from riyadh ksa i love the bike soon wish to have it..wala pa kasi sa zambianga city to ewan kung kelan magkakaroon ride safe lods

@LonRider

3 жыл бұрын

Salamat lods! Balita ko ang ganda ng mga kalsada dyan ah, sarap motorin ✌️

Planning to buy for touring with obr purposes, sana maka hanap ka ng shortened adjustable clutch and brake levers

@LonRider

2 жыл бұрын

Best for touring! Power with very good gas consumption :) Eto po ang performance nya sa long ride: kzread.info/dash/bejne/oYOivNyjgNOrp5s.html

Nice sound paps

@LonRider

3 жыл бұрын

Salamat paps! ✌️

hello, nice bike! is it possible to change the exhaust tip only? without having to remove the whole pipe? for example if I get a 51mm SC project exhaust tip can I easily change it with the stock exhaust or I have to weld it to the pipe?

@LonRider

3 жыл бұрын

Thanks man! You have to cut the tip if you want to keep the catalytic converter. Then you need some adapter between the 51mm canister and the stock pipe from where made the cut✌️

@motoridez7394

3 жыл бұрын

@@LonRider Oh ok, Thanks man! Ride safely :)

@LonRider

3 жыл бұрын

@@motoridez7394 Ride safe too ✌️

La pregunta es si estos cambios ayudan al motor en su relación fuerza y potencia?

@LonRider

2 жыл бұрын

Power-to-weight ratio, yes, there's improvement. The catalytic converter from the stock pipe weighs a lot compared to the new one :)

A question regarding your aftermarket bar-end rear view mirrors. Did you change them because they really provide better view, or just for fancy looks? The reason I ask is that Gixxer 250 mirrors really don't perform well. Probably the worst rear view of any bike I've had so far, and I've had many (big) bikes.

@LonRider

2 жыл бұрын

Looks and manueverability during traffic. Stocks are too big and wide :)

@hrvojeblazevic1348

2 жыл бұрын

@@LonRider OK, I thought so, but are the also performing well. If yes? I'll change mine as well.

@LonRider

2 жыл бұрын

Stocks are better (in viewing purposes). Also, the bar ends serves as some kind of lever protection in the event of a crash :)

Did you adjust from the ECU b cos it cant effect performance

@LonRider

3 жыл бұрын

Not yet. Yes, Ecu reflash helps. But just changing to a lighter exhaust system gains a lot from weight savings :)

Hi , Can you provide link for the exhaust ? Thanks.

@LonRider

3 жыл бұрын

Its from a local dealer here in PH

Boss, nice exhaust. How much did it cost you? Is it available online? I want to install it in my SF 250

@LonRider

2 жыл бұрын

Thanks bro!! Price is around USD160 total :)

Hanep lutong ng tunog sulit yan kahit may silenser paangkas boss haha ride safe

@LonRider

3 жыл бұрын

Oo boss sulit talaga! RS din :)

I thought i shared pipe with the sf250 or does it not ...

@LonRider

11 ай бұрын

I think its the same. Might be a little different in the header sectiojn of the fairings of SF :)

New subscriber 👌 Ganda nung tunog paps. Magkano inabot full system? Ty

@LonRider

3 жыл бұрын

Ty paps. 8k total nyan ✌️

Bro please tell me whats Your exsoust name & price? If possible give me online link please

@LonRider

2 жыл бұрын

It's Yoshimura pipe :)

Kahit anong sukat lang ba ng elbow sir tapos yung shop na mismo didiskarte para ma sakto sa gixxer? sf250 kasi sakin

@LonRider

2 жыл бұрын

Standard na sukat po dapat (tulad ng sa stock) para hindi maging sungaw :)

Did you mount the O2 sensor back into the new Bend pipe ?

@LonRider

3 жыл бұрын

Yes, just like the stock pipe :)

@ericsamuels840

3 жыл бұрын

@@LonRider oh OK can you share the same picture of it in Instagram ?

Bro, does it any effect without catalytic converter? Or is there any problem?

@LonRider

Жыл бұрын

It still runs smooth so far 🤟

@remruataz9798

Жыл бұрын

@@LonRider thanks bro...

If we remove the catylitic converter will it affect engine life in the long run? As catylitic converter is responsible for the perfect air fuel mixture which is sent to the engine ,so on removing the cat con won’t it harm the engine ? Im not an expert on this if you are could you please make a detailed video on it?

@LonRider

2 жыл бұрын

It is the ECU that is responsible for the mixture. The catalytic is for the emission :)

@shinryu9754

2 жыл бұрын

@@LonRider Anong ecu pinalit niyo sir?

What's the cam you were using..?

@LonRider

3 жыл бұрын

Its GoPro Session :)

Sounds good! Wish the bike culture here was as active as it is there.

@LonRider

3 жыл бұрын

Thanks bro! Where you from by the way? 😊

@kuhndj67

3 жыл бұрын

@@LonRider US... New York.

@LonRider

3 жыл бұрын

@@kuhndj67 Oh I see. I thought we have same culture, like those harleys group riding out there ✌️

@kuhndj67

3 жыл бұрын

@@LonRider There are Harley's but cruisers aren't for everyone (I'm more interested in sport riding and ADV riding).

@LonRider

3 жыл бұрын

@@kuhndj67 Agree. And I'm into sports touring✌️

Nakakainlab hahahahaha sanahalls

@LonRider

3 жыл бұрын

Salamat boss ✌️

Did you have yo to tune the ecu?

@LonRider

2 жыл бұрын

Not yet, but planning to :)

Ganda po. New subscriber po

@LonRider

3 жыл бұрын

Salamat po✌️

bhai, what is actual millage this time u getting?

@LonRider

3 жыл бұрын

I got better mileage after the breakin and this upgrade. You can see it here: kzread.info/dash/bejne/oYOivNyjgNOrp5s.html

Hi nice video, plis can u show how u install the phone there? thx

@LonRider

2 жыл бұрын

Thanks! Do you mean the cellphone holder?

@Fretzton

Жыл бұрын

@@LonRider that would be dope, pls 🙏 also do you happens to have the link of where to buy that exhaust system??

BAGAY SIR!

@LonRider

3 жыл бұрын

Salamat sir!! :)

Anu pong bar end mirror ginamit niyo po? Tanung ko po kung maganda po ba yung Moxi 3 piece handle bar po? Balak ko din po sana mag pa tail tidy maganda po ba pag nasa Rear wheel po yung license plate?

@LonRider

3 жыл бұрын

Generic bar end lang yan sir sa lazada. Yung moxi ba yung transformer na handle bar? I prefer na walang moving parts sa steering handle. License plate sa baba, depende sa taste mo yan sir. Pero sa tingin ko, dahil sobrang laki ng bagong plates, baka hindi na bumagay :)

@kylorojen8066

3 жыл бұрын

@@LonRider Thankyou poo!!

Boss wala pa bang aftermarket na pipe and elbow para sa gixxer 250? Yung plug and play nlng po? Salamat sa tugon. RS

@LonRider

2 жыл бұрын

Meron mismo sa Yoshimura Japan website. Compute mo na lang po ang pag import dito :)

@jairobarros-nabu3635

2 жыл бұрын

@@LonRider podrias pasar el link de compra del exosto?

Paps paano yung O2 sensor ano ginawa nila nag but as din ba sila paps.

@LonRider

3 жыл бұрын

Yes paps may butas. Same sa stock ng FI :)

Sir Lon yung stock pipe nyo iiwan na lang sa shop?. O binibili nila?

@LonRider

5 ай бұрын

Inuwi ko din po yung stock for future use 🤟

sir sa 155 cc na gixxer na pareho mo na motor ano po kaya ang pinakamalaki na gulong ang kasya sa rear?

@LonRider

3 жыл бұрын

180 daw po. Pero donut na. Para sakin sakto lang ang 150/60 :)

Were we will get this full system

@LonRider

3 жыл бұрын

You can check out the yoshimura japan website for this exhaust ✌️

Good

@LonRider

3 жыл бұрын

Thanks!! :)

Ayos Sir maganda na tunog mas okay sa may silencer, panget naman pag sobrang ingay maiirita ibang tao at may epekto din sa rider mabilis makapagod

@LonRider

3 жыл бұрын

Tama sir. Sumasakit din ulo lalo na pag long ride. Mag expirement na lang ako ng iba ibang silencer✌️

Ganda ng tunog

@LonRider

2 жыл бұрын

Salamat sir :)

What muffler model is this i want ti buy also

@LonRider

2 жыл бұрын

Yoshimura R77 :)

@bineshnarayanan3257

2 жыл бұрын

@@LonRider where you bought bro

@bineshnarayanan3257

2 жыл бұрын

and price

@LonRider

2 жыл бұрын

Locally made in the Philippines bro :)

Kailangan pa ba i.tune ang ecu after maglagay ng aftermarket exhaust?

@LonRider

3 жыл бұрын

Recommended but not required :)

Boss tanong ko lang po ksi balak ko sana mag pa full exhaust system sa gixxer ko. Yung sa yo ba boss is hindi umi.ilaw ang fi? kasi may oxygen sensor kasi yan sa elbow. yung bago mong kinabit is may socket para sa oxygen sensor?

@LonRider

3 жыл бұрын

Yes, may socket din itong bago. Alam na yan sa mga muffler shop. Sa una lang umilaw, mag-aadjust dapat yun after few minutes then mawawala na :)

@musicgenius6457

3 жыл бұрын

@@LonRider thanks boss sana lumaki yung channel mo Good Bless.

@LonRider

3 жыл бұрын

No problems paps! Thank you din! Ride Safe! :)

kuys, magkano pagawa ng ganyang elbow with resonator? para po my idea ako pag bumili online. salamat.

@LonRider

Жыл бұрын

2500 po pagawa ko nuon 🤟

Boss ung parang belly fan Kaya nya sa ilalim Ng makina pwd Kaya sa 150 yan

@LonRider

3 жыл бұрын

Tingin ko swak sa gixxer 2020 model. Need lang yata ng bracket :)

paps pwedi ba magpashipping nang buong set bohol po loc. pap. magkanu po kaya.?

@LonRider

3 жыл бұрын

Sa seller kasi paps muffler lang. Hahanap ka talaga ng custom elbow for 250 :)

Kamusta fuel consumption nyo sir? Affected ba since binago yung cat?

@LonRider

Жыл бұрын

Hindi naman po. Kaya pa mag 40kpl during long rides :)

Whats the top speed you have achieved after installing the exhaust

@LonRider

2 жыл бұрын

Same. Its the torque/acceleration that's changed :)

Yoshimura "full exhaust" 🤣 sounds amazing

@LonRider

3 жыл бұрын

Thanks :)

Sir hindi kaba yan huhulihin ng polis sir pag may silenser?

@LonRider

2 жыл бұрын

Hindi na po kasi pasok na sa decibel meter :)

Ns200 or gixxer 250 which is the best bro?

@LonRider

Жыл бұрын

For me, it would ve gixxer because of these: +50cc Led lights Dual abs

@htennekamsiran91

Жыл бұрын

@@LonRider syempre ang looks din boss. Ganda ng Gixxer 250

Wat is the name of that exhaust..?

@LonRider

3 жыл бұрын

Yoshimura Carbon finish exhaust pipe

paps ano nilamang ng yoshimura kumpara sa akrapovic? ty.

@LonRider

2 жыл бұрын

Not sure po. Di pa ako nakatry ng akra. Pero tingin ko same lang. Tunog/base lang pinagkaiba :)

Lods ang ganda naman motor mo pero may napanuod ako rusty daw gixxer vlog ng indian plan ko kase yan sana hindi na rusty mga ilalabas sa pinas

@LonRider

3 жыл бұрын

Salamat lods! Narinig ko nga yung issue na yun, mostly sa 150. Mukang matibay naman tong 250 ✌️

sir kung magrenew ka ba nang motor mo ok lang ba ganyan yung muffler mo?

@LonRider

2 жыл бұрын

Yes. Hindi rin naman nasisita sa mga checkpoints :)

Magkano pagwa mo elbow with reso paps? Nice talaga! 🤙🏻🔥

@LonRider

3 жыл бұрын

Salamat paps! 8k total nyan ✌️

sir bat parang tumaas ata idle nya after magpalit ng exhaust?? pano solusyon non

@LonRider

3 жыл бұрын

Sa simula lang yun sir, mag aadjust pa ang ECU. At cold start kasi nung nag sound test sa video :)

Bro, Yoshimura RD Comes with full system wright?..

@LonRider

3 жыл бұрын

On specific bikes, yes. I haven't seen one yet for gixxer 250✌️

@vishnurnair7973

3 жыл бұрын

On construction process when I checked in their official web site comes with full system exhaust from pipe to slip-on...

@LonRider

3 жыл бұрын

@@vishnurnair7973 is there one for gixxer 250?

@vishnurnair7973

3 жыл бұрын

Yep,there is 2 models with 3 colour variants, check on their japanese website...

@LonRider

3 жыл бұрын

@@vishnurnair7973 ah okay. That's nice to know. But shipping it here is so expensive, that's why I went for the alternative ✌️

Good day boss, wala po bang pugak? Kahit stock ecu?

@LonRider

3 жыл бұрын

Wala naman po boss. Swabeng swabe ✌️

Paps may kick start pa ang Gixxer 250?

@LonRider

3 жыл бұрын

walang kick start paps :)

Sayang di mo sir nakuhanan yung close up look nung na-install na.

@LonRider

2 жыл бұрын

Check mo dito sir, pati na rin ibang accessories :) kzread.info/dash/bejne/f4l9qNNulKmxddo.html

ganda paps..lakas ng mots..hehe..denziomoto here.. pa shawt awts paps.. kapag marka nko..pamarka nlng din s akin..ride safe and God bless paps

@LonRider

3 жыл бұрын

Salamat paps! Markado na rin! RS✌️

What about CPU? does it legal modifications??

@LonRider

3 жыл бұрын

Did you mean ECU? :)

@jeevansinghmehta9751

3 жыл бұрын

@@LonRider Central Police Unit... Cops... Chalaan to ni katega??

@LonRider

3 жыл бұрын

its legal on our area :)

@MRMmmm-ys8du

3 жыл бұрын

Free flow performance exhausts are legal in their country.

Ganda ng new exhaust mo sir! Di ba yan mahuhuli or pinagbabawal? Nakak apekto na sa performance pag nag chechange ka ng new exhaust paps? Yung stock exhaust pap binenta mo ba dun sa binilhan mo ng yushimura exhaust?

@LonRider

3 жыл бұрын

Dagdag sa performance sir. Binalikan ko yung stock exhaust. Di kayang dalhin pah sa motor✌️

@seanphilip6991

3 жыл бұрын

@@LonRider Nice! Like lumakas ang hatak sir? Kala ko kase di na nila eh balik yung stock pwde pala sir hehe

@LonRider

3 жыл бұрын

@@seanphilip6991 mas ramdam na ang hatak at arangkada sir 😁 Kinuha ko yung stock just in case na need ko ibalik sa dati ✌️

@seanphilip6991

3 жыл бұрын

@@LonRider Nice! Di ba huli sa LTO yan sir? Ganda kasi ng tunog pag bumili nako ng gixxer sf 250 yan gusto kong eh palit sa stock, ang brusko mg tunog kaso baka bawal sa lto paps di nman?

@LonRider

3 жыл бұрын

@@seanphilip6991 hindi naman. May silencer naman ito ✌️

Ang Ganda porma ng elbow, sarap ng tunog.. Saan location po

@LonRider

3 жыл бұрын

Salamat po! KRM Racing muffler po sa litex QC :)

how is the performance and comfort ng unit n gamit mo sir?

@LonRider

2 жыл бұрын

Superb All-around bike!! See here: kzread.info/dash/bejne/oYOivNyjgNOrp5s.html

boss., pasok ba siya sa decibel meter required ng lto? ang pogi at ganda ng tunog.,👍👍

@LonRider

2 жыл бұрын

Salamat boss!! Pasado naman sya, malaking tulong yung silencer :)

@jonathanobligado7507

2 жыл бұрын

wow. salamat boss., ito talaga first choice ko na motor. mataas din seating hieght niya no? hindi ko pa nakikita sa personal pero ayan talaga bibilhin ko pag uwi ko ng pinas.,👍👍👍👍

@LonRider

2 жыл бұрын

Sakto lang sa pinoy ang seat height boss. Sulit itong motor na to! Kaso wala nga lang stock sa ngayon :)

Sir, need pa ba remap/reflash ung ECU after makapagpalit ng full system exhaust?

@LonRider

2 жыл бұрын

Recommended but not required po :)

Boss, 1 month na rin gixxer 250 ko at break-period pa lang 30 kms natakbo.

@LonRider

3 жыл бұрын

Ride lang ng ride boss. Sulit yan✌️

Paps meron pa ba 250cc na available sa mga motor dealers?

@LonRider

3 жыл бұрын

Madalang paps. Kahit SF wala pa ako nakikita ulit na stock

How much cost bro I want to Change???

@LonRider

3 жыл бұрын

Its 8000 Philippine Peso :)

@jeevansinghmehta9751

3 жыл бұрын

@@LonRider how much in dollars??

Super cool !! Can you do a flyby sound test

@LonRider

3 жыл бұрын

Thanks! I will do one. Watch out for it in this channel :)

Mileage in City and in Highway!?

@LonRider

Жыл бұрын

33-35kpl on city. 38-42kpl on highway 🤟

Boss magkano poh Pagawa exhaust 150 cc poh motor q bka pwdi shaping pay salamat po

@LonRider

3 жыл бұрын

Canister lang po ang binili ko worth 5k, then custom elbow worth 3k. Try nyo maghanap ng canister online then pa-custom na lang kayo ng elbow

Is gixxer suitable for touring

@LonRider

3 жыл бұрын

Yes, it's best for touring. See details here: kzread.info/dash/bejne/oYOivNyjgNOrp5s.html

@suranjangupta9439

3 жыл бұрын

@@LonRider being a 250 gixxer owner, I will suggest you that gixxer is great for touring.. buy the SF version.. you need to modify the seats

@marcellbagas1059

2 жыл бұрын

@@suranjangupta9439 well i thought the naked version is better for touring than the sf version?

Boss saan yang muffler shop na yan? Solid gawa! RS boss!

@LonRider

3 жыл бұрын

Sa QC boss. Near litex. RS✌️

Is full system?

@LonRider

3 жыл бұрын

Yes full system :)

Carbon Lodi :)

@LonRider

2 жыл бұрын

Karbon papi :)

KUYS! Pwede ko ba mahingi yung link ng kinuhaan mo ng Full System Yoshimura Pipe mo?

@LonRider

2 жыл бұрын

Canister lang po ang binili ko sa FB Marketplace. Then custom elbow na :)

@daddykuystv9920

2 жыл бұрын

@@LonRider salamat kuys! Soon magkakaron dn ako niyan😁🙏🙏🙏

sa shopee mo rin nabili yung yoshi r77 paps?

@LonRider

Жыл бұрын

Sa FB marketplace paps 🤟

Sir silencer name plz replay

@LonRider

2 жыл бұрын

The silencer comes with exhaust itself :)

Idol meron n b dito s pinas ang gixxer 250? Tnx more power

@LonRider

3 жыл бұрын

Meron na sir. Pati SF250 meron na rin. Hanap lang kayo ng mga dealer✌️

Magkano po sir pagawa nyo sa elbow pipe at San kau nakabili ng ganyang mufler? Salamat

@LonRider

3 жыл бұрын

Search mo sir KRM racing mufflers. Dyan ko binili yung pipe at pagawa ng custom elbow✌️

@giljustineaguro3852

3 жыл бұрын

@@LonRider Ok po sir Salamat 😇

With cat removed?

@LonRider

2 жыл бұрын

Yes, for weight savings :)